Helium Hardware Definitions
Project description
Helium Hardware Definitions
This repository contains the python file that contains a GPIO map for all of the different hardware combinations to be supported by the Nebra Helium Hotspot Software.
All numbers below are their GPIO / BCM Numbers, not physical pin numbers.
Note: Light hotspot software will work on all listed as variant "full"
Nebra Hotspots
Model | ENV Identifier | SPI Bus | Reset Pin | Status LED | Button | Type | Notes |
---|---|---|---|---|---|---|---|
Nebra Indoor Hotspot Gen 1 | NEBHNT-IN1 | 1.2 | 38 | 25 | 26 | Full | CM3 based |
Nebra Outdoor Hotspot Gen 1 | NEBHNT-OUT1 | 1.2 | 38 | 25 | 24 | Full | CM3 based |
Nebra Pi 0 Light Hotspot S | NEBHNT-LGT-ZS | 1.2 | 22 | 24 | 23 | Light | SPI Based Ethernet |
Nebra Pi 0 Light Hotspot X | NEBHNT-LGT-ZX | 1.2 | 22 | 24 | 23 | Light | USB Based Ethernet |
Nebra Beaglebone Light Hotspot | NEBHNT-BBB | 1.0 | 60 | 31 | 30 | Light | In Planning |
Nebra Pocket Beagle Light Hotspot | NEBHNT-PBB | 1.0 | 60 | 31 | 30 | Light | In Planning |
Nebra Hotspot HAT RockPi4 | NEBHNT-HHRK4 | 1.0 | 149 | 156 | 154 | Full | In Planning |
Nebra Hotspot HAT RPi | NEBHNT-HHRPI | 0.0 | 22 | 24 | 23 | Full | Should be compatible with 3+ & 4 |
Nebra Hotspot HAT RPi LIGHT | NEBHNT-HHRPL | 0.0 | 22 | 24 | 23 | Light | Light is compatible with all 40 pin headers |
Nebra Hotspot HAT Tinkerboard 2 | NEBHNT-HHTK | 2.0 | 167 | 163 | 162 | Full | Light would be compatible on TK1 |
Third Party Hotspots
We may be adding in support for other vendor's hotspots to use our software soon. Here are the variables for those.
These would also depend on their SOCs being supported by Balena.
Model | SOC/SBC | ENV Identifier | SPI Bus | Reset Pin | Status LED | Button | Type | Notes |
---|---|---|---|---|---|---|---|---|
Rak Hotspot Miner | BCM2711 (Pi4 2gb RAM) | COMP-RAKHM | Full | Only Compatible with V2 hotspots with ECC Key. | ||||
OG Helium Hotspot | BCM2711 (Pi4 2gb RAM) | COMP-HELIUM | Full | |||||
Syncrobit Hotspot 1 (Pi) | Full | |||||||
Syncrobit Hotspot 2 (RK) | Full | |||||||
Bobcat Miner 300 | Full | |||||||
Sensecap M1 | BCM2711 (Pi4 2gb RAM) | COMP-SENSECAP | Full |
DIY Hotspots
The following DIY options are also supported for light hotspot software only.
Please note, DIY Hotspots do not earn HNT.
Model | SOC/SBC | ENV Identifier | SPI Bus | Reset Pin | Status LED | Button | Type | Notes |
---|---|---|---|---|---|---|---|---|
Pi Supply IoT LoRa Gateway HAT | RPi | DIY-PISLGH | 0.0 | 22 | Light | Any pi with 40 pin header | ||
RAK2287 | RPi | DIY-RAK2287 | 0.0 | 17 | Light | Any pi with 40 pin header |
Important Notes
The variant_definitions.py
file is used, with manual source control, in a number of Nebra software repos:
If you update the variant_definitions.py
file here, you need to make sure to also update it in any other repos that use it.
Contributing
If there is hardware that you would like supported the following would be great.
Either:
- Create an issue on this repository which has the name of the Hotspot, or DIY solution. With at a minimum a link to a pinout of the device and which SBC it is to be used with.
- Fork this repository and the device to the array in variant_definitions, update the table above and then create a pull request.
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
Hashes for hm_hardware_defs-0.1.4-py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | 777d84c367be4722a5c2c713970a09d1a03e39e7fe12181066c5a83c5394c872 |
|
MD5 | 4b1e32ea4ac351996f2682b8b8d15e73 |
|
BLAKE2b-256 | 827050b586ae6dd6ac3bf1a762757bf73b1ffbc93076329fa8640bc1290ba709 |