hx711-multi
HX711 class to sample a 24-bit ADC (or multiple) with Python 3 on a Raspberry Pi Rasperry Pi Zero, 2 or 3
Description
This library allows the user to configure and read from one or multiple HX711 ADCs with a Raspberry Pi. It was developed and tested in Python 3.8 on Raspberry Pi 4B with Raspberry Pi OS Lite v5.10.
Capabilities:
- Configure Raspberry Pi digital pins for reading measurements
- Configure Raspberry Pi SCK pin, or clock pin, used for configuring channel and triggering measurements
- Configure Channel (A | B)
- Configure Channel A Gain (128 | 64)
- Power down ADC
- Power up ADC
- Zero ADC at start
- Configure individual weight multiples for calibration of each scale to real-world weight
- Read raw measurements from ADCs
- Read weight measurements from ADCs
This package requires RPi.GPIO to be installed in Python 3.
Hardware
General HX711 documentation is included in Docs folder.
The default sample rate of the HX711 is 10Hz, unless you wire the power to the RATE pin (15), at which point you can sample at 80Hz. I've included a picture of this wiring if desired. The SparkFun board includes a jumper option for this.
SparkFun Hookup Guide - great resource for understanding the wiring to your HX711
SparkFun Load Cells Guide - great resource for understanding load cells
Getting started
Install with pip3 install hx711_multi
Basic usage example:
(also found at /tests/simple_read_test.py)
#!/usr/bin/env python3
from hx711_multi import HX711
from time import perf_counter
import RPi.GPIO as GPIO # import GPIO
# init GPIO (should be done outside HX711 module in case you are using other GPIO functionality)
GPIO.setmode(GPIO.BCM) # set GPIO pin mode to BCM numbering
readings_to_average = 10
sck_pin = 1
dout_pins = [2, 3, 4, 14, 15]
weight_multiples = [-5176, -5500, -5690, -5484, -5455]
# create hx711 instance
hx711 = HX711(dout_pins=dout_pins,
sck_pin=sck_pin,
channel_A_gain=128,
channel_select='A',
all_or_nothing=False,
log_level='CRITICAL')
# reset ADC, zero it
hx711.reset()
try:
hx711.zero(readings_to_average=readings_to_average*3)
except Exception as e:
print(e)
# uncomment below loop to see raw 2's complement and read integers
# for adc in hx711._adcs:
# print(adc.raw_reads) # these are the 2's complemented values read bitwise from the hx711
# print(adc.reads) # these are the raw values after being converted to signed integers
hx711.set_weight_multiples(weight_multiples=weight_multiples)
# read until keyboard interrupt
try:
while True:
start = perf_counter()
# perform read operation, returns signed integer values as delta from zero()
# readings aare filtered for bad data and then averaged
raw_vals = hx711.read_raw(readings_to_average=readings_to_average)
# request weights using multiples set previously with set_weight_multiples()
# This function call will not perform a new measurement, it will just use what was acquired during read_raw()
weights = hx711.get_weight()
read_duration = perf_counter() - start
sample_rate = readings_to_average/read_duration
print('\nread duration: {:.3f} seconds, rate: {:.1f} Hz'.format(read_duration, sample_rate))
print(
'raw',
['{:.3f}'.format(x) if x is not None else None for x in raw_vals])
print(' wt',
['{:.3f}'.format(x) if x is not None else None for x in weights])
# uncomment below loop to see raw 2's complement and read integers
# for adc in hx711._adcs:
# print(adc.raw_reads) # these are the 2's complemented values read bitwise from the hx711
# print(adc.reads) # these are the raw values after being converted to signed integers
except KeyboardInterrupt:
print('Keyboard interrupt..')
except Exception as e:
print(e)
# cleanup GPIO
GPIO.cleanup()
Calibration sequence
Each HX711 ADC needs to be calibrated separately in order to account for variance in raw measurements compared to real world weight. For example, the ADC may return a value of 5000 which corresponds to 1 gram. In this case, the weight multiple for this ADC should be set to 5000.
Run the calibration sequence with known weights after initializing your HX711 object with the below command. Optional input for known weights included so that you can run through the process faster without needing to type in the weights throughout the sequence. If no known weights are input, it will prompt user before each measurement. This should only need to be performed once during hardware setup, or if the measurement environment changes (temperature, humidity, etc).
(full example can be found at /tests/calibrate.py)
weight_multiple = hx711.run_calibration(known_weights=[5, 10, 50, 100])
print(f'Weight multiple = {weight_multiple}')
Author
- James Morris (https://james.pizza)
License
- Free software: MIT license
Credits
- Starting point: https://github.com/gandalf15/HX711/
Metadata
Release files for hx711-multi 1.2.5
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| hx711_multi-1.2.5.tar.gz | 14.3 kB | Without provenance | Details for hx711_multi-1.2.5.tar.gz |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| hx711_multi-1.2.5-py3-none-any.whl | Python 3 | none | any | Details for hx711_multi-1.2.5-py3-none-any.whl |
Total release size: 27.2 kB
Release files / hx711_multi-1.2.5.tar.gz
| Download URL | hx711_multi-1.2.5.tar.gz |
|---|---|
| Size | 14.3 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
e9263f7fadb662afc24f03ae8a86b5a952041a02cce8bd0c2537289fabff924c
|
|
BLAKE2b-256 checksum How to use checksums |
7ec93a2984f5a1b1fadcacacf0ed4610fab788b1f29eb40366cf66f9656ef8b7
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/3.7.0 importlib_metadata/4.8.2 pkginfo/1.8.2 requests/2.26.0 requests-toolbelt/0.9.1 tqdm/4.62.3 CPython/3.9.9
|
Release files / hx711_multi-1.2.5-py3-none-any.whl
| Download URL | hx711_multi-1.2.5-py3-none-any.whl |
|---|---|
| Size | 12.9 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
490346e1ffe0f06f39024576cac6e96d6ef3f7bfafc5b58e8523549ea1d1b17b
|
|
BLAKE2b-256 checksum How to use checksums |
4ea12c2b4e0c3fe2caeb8426109b08012227fcc0a23559dcda216585f4063ca2
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/3.7.0 importlib_metadata/4.8.2 pkginfo/1.8.2 requests/2.26.0 requests-toolbelt/0.9.1 tqdm/4.62.3 CPython/3.9.9
|
Security for hx711-multi 1.2.5
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
No provenance found
None of the files in this release were uploaded with provenance metadata.
A note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.