Graphical interface for I2Cx Cyber Range, scanner-Lite(FT2232H),scanner (FPGA) and platform (stm32F7)
Project description
I²Cx Graphical User Interface
Code source is available on GitHub [1]: https://github.com/I2Cx-Cyber-Range/i2cx-gui
I²Cx Scanner Lite
Port A => can drive 4 mA (needed for SWD)
Port B => can drive 16 mA (useful to force logic level on bus like I2C and SPI and avoid reset master)
Install from PyPi
pip3 install i2cx --no-cache-dir
Upgrade from PyPi
pip3 install upgrade i2cx --no-cache-dir
To start Graphical Interface of I²Cx Cyber Range
i2cx
OpenOCD
To use I²Cx Scanner Lite with openOCD you need to add a config file (available in tools folder)
wget https://github.com/I2Cx-Cyber-Range/i2cx-gui/tools/ftdi/conf_i2cx_scanner_-lite_lootus_pid.xml -P /usr/local/share/openocd/scripts/interface/i2cx-scanner-lite.cfg
openocd -f interface/i2cx-scanner-lite.cfg -f target/stm32f7x.cfg -c "adapter speed 4000"
In another console
telnet 127.0.0.1 4444
To read firmware
flash read_bank 0 firmware.bin
Allow I2Cx Scanner Lite to non root user and Load FTDI driver to I2CX Scanner Lite
wget https://github.com/I2Cx-Cyber-Range/i2cx-gui/tools/openocd/i2cx-scanner-lite.cfg -P /etc/udev/rules.d/35-i2cx-cyber-range.rules
or add manually both line to a new file for example: /etc/udev/rules.d/35-i2cx-cyber-range.rules
SUBSYSTEM=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6E50", GROUP="plugdev"
ACTION=="add", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6e50", RUN+="/sbin/modprobe ftdi_sio" RUN+="/bin/sh -c 'echo 0403 6e50 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id'"
In case of OpenGl issue
ImportError: libOpenGL.so.0: cannot open shared object file: No such file or directory sudo apt update sudo apt upgrade sudo apt dist-upgrade sudo apt-get install -y libopengl0
sudo apt-get install libglib2.0-dev
or
sudo apt-get install --reinstall libxcb-xinerama0
or
sudo apt-get install freeglut3 freeglut3-dev
I2CX on windows
The probably easiest way to deal with libusb on Windows is to use Zadig
Start up the Zadig utility
Select Options/List All Devices, then select the FTDI devices you want to communicate with. Its names depends on your hardware, i.e. the name stored in the FTDI EEPROM.
With FTDI devices with multiple channels, such as FT2232 (2 channels) and FT4232 (4 channels), you must install the driver for the composite parent, not for the individual interfaces. If you install the driver for each interface, each interface will be presented as a unique FTDI device and you may have difficulties to select a specific FTDI device port once the installation is completed. To make the composite parents to appear in the device list, uncheck the Options/Ignore Hubs or Composite Parents menu item.
Be sure to select the parent device, i.e. the device name should not end with (Interface N), where N is the channel number.
for example Dual RS232-HS represents the composite parent, while Dual RS232-HS (Interface 0) represents a single channel of the FTDI device. Always select the former.
Select libusb-win32 (not WinUSB) in the driver list.
Click on Replace Driver
Project details
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.