instantpy 0.0.2

A Python wrapper for Aruba Instant REST API

Aruba Instant Python API Wrapper

This module provides a Python 3 interface for the Aruba Instant 8.6 REST API.

Please understand this project is a WIP. I'd also really appreciate some help testing. My Instant cluster is my production wifi at home. I can't thoroughly test certain calls to the API (specifically in the Configuration portion) because breaking the wifi at home would result in an unhappy household.

For full documentation, see here.

The REST API is divided into three secions. Monitoring, Action, and Configuration. Details on each section are below. Logging in and out is handled by the login() and logout() methods. Logging in has a decorator method that will handle logging in if needed. You will still need to handle logging out. See examples below.

Monitoring

The monitoring endpoints of the API is used for, obviously, monitoring. It is used to gather state, statistics, and logs from master, slave, or standalone Instant APs. The architecture of this portion of the API is very similar to the cli output of "show" commands. The currently supported commands are show clients and show aps. More will be added shortly. There is also a generic show command method that will accept any CLI show commands and return unstructured text.

Feel free to open an issue and request support for more commands if the structured output would be helpful. I can also add support for different OS versions (at least back to 8.5) if it would be helpful.

NOTE: The response from the API is currently unstructred text and requires parsing with RegEx.  
This lends itself to breaking easily between versions.  My current testing has been against 8.6.

Action

The action endpoints are used for configuring AP specific settings. See below for supported endpoints.

Endpoint	Method	Description
Hostname	hostname()	Set the hostname of a specific IAP.
Swarm Mode	swarm()	Set an AP to be standalone or part of a swarm cluster.
Static Channel and Power	channel()	Set the tx channel and power of the radios of a specific IAP.
Zone	zone()	Set the zone of a specific IAP.
Antenna Gain	antenna_gain()	Set the specific antenna gain when external antennas are used.
Enable and Disable Radios	radio_state()	Enable or disable a radio in an AP.
Generic Show Command	show_cmd()	Returns unstructured output text from any "show" command provided.

Configuration

Configuration endpoints are used to configure an Instant Virtual Controller. See table below for supported endpoints.

When intantiating an instance of InstantVC() the 'templates' directory defaults to the folder in the project. It is recommended that you create your own templates directory and use this one for reference.

Note: Due to the complexity of the profiles created using these endpoints, 
all Configuration methods require a json file as an argument.

There are examples in the "templates" directory.  
These example templates were taken directly from the 
Aruba Instant REST API document referenced above.

Endpoint	Method	Description
VC Country Code	vc_country_code()	Set the virtual controller country code.
VC IP address	vc_ip()	Set the IP of the virtual controller.
NTP Server	ntp()	Set the NTP server of the virtual controller.
Syslocation	syslocation()	Set the syslocation of the virtual controller.
Organization	organization()	Set the virtual controller organization.
Syslog Level	syslog_level()	Set the syslog level for the virtual controller.
Syslog Server	syslog_server()	Set the destination IP for syslog traffic from the virtual controller.
dot11g Radio Profile	radio_11g()	Configure a radio profile for the 2.4GHz antenna.
dot11a Radio Profile	radio_11a()	Configure a radio profile for the 5GHz antenna.
ARM	arm()	Configure an ARM profile for use by the Instant cluster.
SSID Profile	ssid()	Configure an SSID profile for use by the Instant cluster.
RF Band	rf_band()	Configure an RF Band (2.4, 5, all) profile for use by the Instant cluster.
Authentication Server Profile	auth_server()	Configure an authentication server (RADIUS) for the virtual controller.
ACL Profile	acl()	Configure an ACL profile for use by the Intant cluster.
External Captive Portal	ext_captive_portal()	Configure an External Captive Portal profile for use by the Instant cluster.
IDS	ids()	Configure an IDS profile for use by the Instant cluster.
Software Upgrade	os_upgrade()	Initiate an OS Upgrade of the Instant cluster.
Time Zone	clock()	Set clock and timezone of the virtual controller.
AP Reboot	ap_reboot()	Initiate a reboot of a single or all APs in the Instant cluster.
Wired Port Profile	wired_port()	Configure a wired port profile for use by the Instant cluster.
Wired Profile Map	wired_profile_map()	Configure a wired profile to port mapping for use by the Instant cluster.
Management User	mgmt_user()	onfigure management users on the virtual controller.

Examples:

Login leveraging the @autologin decorator - In this scenario the decorator will login for you when the first API call is made.

import instantpy

vc = instantpy.InstantVC('user', 'password', 'VC IP')

result = vc.clients()
...
vc.logout()

Monitoring Endpoint Example

List connected clients

import json
import instantpy

vc = instantpy.InstantVC('user', 'password', 'VC IP')
result = vc.clients()
print(json.dumps(result, indent=4))
vc.logout()

Arbitrary 'show' command

import json
import instantpy

vc = instantpy.InstantVC('user', 'password', 'VC IP')
result = vc.show_command(command="show swarm state")
print(result)
vc.logout()

Action Endpoint Example

Set Hostname of a specfic AP

import json
import instantpy

vc = instantpy.InstantVC('user', 'password', 'VC IP')
result = vc.hostname(name="testname", iap_ip="1.2.3.4")
print(json.dumps(result, indent=4))
vc.logout()

Configuration Endpoint Example

Set RADIUS Authentication Server

import json
import instantpy

vc = instantpy.InstantVC('user', 'password', 'VC IP')
result = vc.auth_server(template='auth_server_template.json')
print(json.dumps(result, indent=4))
vc.logout()

---

If this project has been helpful you can buy me a coffee but please don't feel obligated.