Interactive system-monitor and process viewer for all NVIDIA Jetson [Nano, AGX Xavier, TX1, TX2]
Project description
Jetson stats
jetson-stats is a package to monitoring and control your NVIDIA Jetson [Nano, Xavier, TX2i, TX2, TX1] embedded board. When you install jetson-stats are included:
Read the Wiki for more detailed information or read the package documentation.
Install
sudo -H pip install -U jetson-stats
🚀 That's it! 🚀
PS: Don't forget to reboot your board
You can run jtop in your python script read here
jtop
It is a system monitoring utility that runs on the terminal and see and control realtime the status of your NVIDIA Jetson. CPU, RAM, GPU status and frequency and other...
The prompt interface will be show like this image:
You can run the jtop with (Suggested to run with sudo)
sudo jtop
Other options are availables with -h
option:
nvidia@jetson-nano:~/$ sudo jtop -h
usage: jtop [-h] [-r REFRESH] [--debug] [--page PAGE] [--no-warnings]
[--restore] [-v]
jtop is system monitoring utility and runs on terminal
optional arguments:
-h, --help show this help message and exit
-r REFRESH refresh interval
--debug Run with debug logger
--page PAGE Open fix page
--no-warnings Do not show warnings
--restore Reset Jetson configuration
-v, --version show program's version number and exit
Pages
jtop have four different pages to control your NVIDIA Jetson:
- ALL Are collected all information about your board: CPUs status, Memory, GPU, disk, fan and all status about jetson_clocks, NVPmodel and other
- GPU A real time GPU history about your NVIDIA Jetson
- MEM A real time Memory chart and swap monitor
- CTRL Enable/Disable jetson_clocks, nvpmodel or fan directly from here
- INFO All information about libraries, CUDA, Serial Number, interfaces, ...
Controls
To control the your NVIDIA Jetson are available this keyboard commands:
In page 3 MEM:
- c Clear cache
- h Enable/Disable extra swap
- + and - Increase and decrease swap size
In page 4 CTRL:
- a Start/Stop jetson_clocks service (Note: jetson_clocks start only after 60s from up time)
- e Enable/Disable jetson_clocks on board boot
- + and - Increase and decrease the NVPmodel
- f Manual/jetson_clocks mode for your fan
- p and m Increase and decrease the Fan speed
jetson_config
Check jetson-stats health, enable/disable desktop, enable/disable jetson_clocks, improve the performance of your wifi are available only in one click using jetson_config
jetson_release
The command show the status and all information about your NVIDIA Jetson
jetson_variables
This script generate the easy environment variables to know which is your Hardware version of the Jetson and which Jetpack you have already installed
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.