json-cfg 0.3.4

JSON config file parser with extended syntax (e.g.: comments), line/column numbers and other extras.

Contents

• Introduction

  • Config file examples

• Usage

  • Installation

  • Quick-starter

  • The loaded json config objects

    • Querying the json config hierarchy

    • Fetching python values from the queried wrapper objects

      • Fetching optional config values (by specifying a default value)

      • Using value mappers to validate and/or transform fetched values

        • Writing a custom value mapper

  • Error handling

  • Optional utility functions

Introduction

The goal of this library is providing a json config file loader that has the following extras compared to the standard json.load():

• A larger subset of javascript (and not some weird/exotic extension to json that would turn json into something that has nothing to do with json/javascript):

  • backward compatible with json so you can still load standard json files too

  • single and multi-line comments - this is more useful then you would think: it is good not only for documentation but also for temporarily disabling a block in your config without actually deleting entries

  • object (dictionary) keys without quotes

  • trailing commas (allowing a comma after the last item of objects and arrays)

• Providing line number information for each element of the loaded config file and using this to display useful error messages that help locating errors not only while parsing the file but also when processing/interpreting it.

• A nice config query syntax that handles default values, required elements and automatically raises an exception in case of error (with useful info including the location of the error in the config file).

Config file examples

A traditional json config file:

{
    "servers": [
        {
            "ip_address": "127.0.0.1",
            "port": 8080
        },
        {
            "ip_address": "127.0.0.1",
            "port": 8081
        }
    ],
    "superuser_name": "tron"
}

Something similar with json-cfg:

{
    // Note that we can get rid of most quotation marks.
    servers: [
        {
            ip_address: "127.0.0.1",
            port: 8080
        },
        // We have commented out the block of the second server below.
        // Trailing commas are allowed so the comma after the
        // first block (above) doesn't cause any problems.
        /*
        {
            ip_address: "127.0.0.1",
            port: 8081
        },  // <-- optional trailing comma
        /**/
    ],
    superuser_name: "tron",  // <-- optional trailing comma
}

Hint: use javascript syntax highlight in your text editor for json config files whenever possible - this makes reading config files much easier especially when you have a lot of comments or large commented config blocks.

Usage

Installation

pip install json-cfg

Alternatively you can download the zipped library from https://pypi.python.org/pypi/json-cfg

Quick-starter

The json-cfg library provides two modes when it comes to loading config files: One that is very similar to the standard json.loads() and another one that returns the json wrapped into special config nodes that make handling the config file much easier:

• jsoncfg.load() and jsoncfg.loads() are very similar to the standard json.loads(). These functions allow you to load config files with extended syntax into bare python representation of the json data (dictionaries, lists, numbers, etc…).

• jsoncfg.load_config() and jsoncfg.loads_config() load the json data into special wrapper objects that help you to query the config with much nicer syntax. At the same time if you are looking for a value that doesn’t exist in the config then these problems are handled with exceptions that contain line/column number info about the location of the error.

One of the biggest problems with loading the config into bare python objects with a json library is that the loaded json data doesn’t contain the line/column numbers for the loaded json nodes/elements. This means that by using a simple json library you can report the location of errors with config file line/column numbers only in case of json syntax errors (in best case). By loading the json nodes/elements into our wrapper objects we can retain the line/column numbers for the json nodes/elements and we can use them in our error messages in case of semantic errors.

I assume that you have already installed json-cfg and you have the previously shown server config example in a server.cfg file in the current directory.

This is how to load and process the above server configuration with json-cfg:

import jsoncfg

config = jsoncfg.load_config('server.cfg')
for server in config.servers:
    listen_on_interface(server.ip_address(), server.port(8000))
superuser_name = config.superuser_name()

The same with a simple json library:

import json

with open('server.cfg') as f:
    config = json.load(f)
for server in config['servers']:
    listen_on_interface(server['ip_address'], server.get('port', 8000))
superuser_name = config['superuser_name']

Seemingly the difference isn’t that big. With json-cfg you can use extended syntax in the config file and the code that loads/processes the config is also somewhat nicer but real difference is what happens when we encounter an error. With json-cfg you get an exception with a message that points to the problematic part of the json config file while the pure-json example can’t tell you line/column numbers in the config file. In case of larger configs this can cause headaches.

Open your server.cfg file and remove the required ip_address attribute from one of the server config blocks. This will cause an error when we try to load the config file with the above code examples. The above code snippets report the following error messages in this scenario:

json-cfg:

jsoncfg.config_classes.JSONConfigValueNotFoundError: Required config node not found. Missing query path: .ip_address (relative to error location) [line=3;col=9]

json:

KeyError: 'ip_address'

The loaded json config objects

When you load your json with jsoncfg.load_config() or jsoncfg.loads_config() the returned json data - the hierarchy - is a tree of wrapper objects provided by this library. These wrapper objects make it possible to store the column/line numbers for each json node/element (for error reporting) and these wrappers allow you to query the config with the nice syntax you’ve seen above.

This library differentiates 3 types of json nodes/elements and each of these have their own wrapper classes:

• json object (dictionary like stuff)

• json array (list like stuff)

• json scalar (I use “scalar” to refer any json value that isn’t a container - object or array)

I use json value to refer to a json node/element whose type is unknown or unimportant. The public API of the wrapper classes is very simple: they have no public methods. All they provide is a few magic methods that you can use to read/query the loaded json data. (These magic methods are __contains__, __getattr__, __getitem__, __len__, __iter__ and __call__ but don’t worry if you don’t about these magic methods as I will demonstrate the usage with simple code examples that don’t assume that you know these magic methods.) The reason for having no public methods is simple: We allow querying json object keys with __getattr__ (with the dot or member access operator like config.myvalue) and we don’t want any public methods to conflict with the key values in your config file.

After loading the config you have a tree of wrapper object nodes and you have to perform these two operations to get values from the config:

1. querying/reading/traversing the json hierarchy: the result of querying is a wrapper object

2. fetching the python value from the selected wrapper object: this can be done by calling the queried wrapper object.

The next sections explain these two operations in more detail.

Querying the json config hierarchy

To read and query the json hierarchy and the wrapper object nodes that build up the tree you have to exploit the __contains__, __getattr__, __getitem__, __len__, __iter__ magic methods of the wrapper objects. We will use the previously shown server config for the following examples.

import jsoncfg

config = jsoncfg.load_config('server.cfg')

# Using __getattr__ to get the servers key from the config json object.
# The result of this expression is a wrapper object that wraps the servers array/list.
server_array = config.servers

# The equivalent of the previous expression using __getitem__:
server_array = config['servers']

# Note that querying a non-existing key from an object doesn't raise an error. Instead
# it returns a special ValueNotFoundNode instance that you can continue using as a
# wrapper object. The error happens only if you try to fetch the value of this key
# without specifying a default value - but more on this later in the section where we
# discuss value fetching from wrapper objects.
special_value_not_found_node = config.non_existing_key

# Checking whether a key exists in a json object:
servers_exists = 'servers' in config

# Using __getitem__ to index into json array wrapper objects:
# Over-indexing the array would raise an exception with useful error message
# containing the location of the servers_array in the config file.
first_item_wrapper_object = servers_array[0]

# Getting the length of json object and json array wrappers:
num_config_key_value_pairs = len(config)
servers_array_len = len(servers_array)

# Iterating the items of a json object or array:
for key_string, value_wrapper_object in config:
    pass
for value_wrapper_object in config.servers:
    pass

Not all node types (object, array, scalar) support all operations. For example a scalar json value doesn’t support len() and you can not iterate it. What happens if someone puts a scalar value into the config in place of the servers array? In that case the config loader code will sooner or later performs an array-specific operation on that scalar value (for example iteration) that will raise an exception with a useful error message pointing the the loader code with the stack trace and pointing to the scalar value in the config file with line/column numbers. You will find more json-node-type related checks and error handling mechanisms in the following sections (value fetching and error handling).

Fetching python values from the queried wrapper objects

After selecting any of the wrapper object nodes from the json config hierarchy you can fetch its wrapped value by using its __call__ magic method. This works on all json node types: objects, arrays and scalars. If you fetch a container (object or array) then it will fetch the raw unwrapped values recursively - it fetches the whole subtree whose root node is the fetched wrapper object.

import jsoncfg

config = jsoncfg.load_config('server.cfg')

# Fetching the value of the whole json object hierarchy.
# python_hierarchy now looks like something you normally
# get as a result of a standard `json.load()`.
python_hierarchy = config()

# Converting only the servers array into python-object format:
python_server_list = config.servers()

# Getting the ip_address of the first server.
server_0_ip_address_str = config.servers[0].ip_address()

Fetching optional config values (by specifying a default value)

The value fetcher call has some optional parameters. You can call it with an optional default value followed by zero or more jsoncfg.JSONValueMapper instances. The default value comes in handy when you are querying an optional item from a json object:

# If "optional_value" isn't in the config then return the default value (50).
v0 = config.optional_value(50)
# This raises an exception if "required_value" isn't in the config.
v1 = config.required_value()

Using value mappers to validate and/or transform fetched values

Whether you are using a default value or not you can specify zero or more jsoncfg.JSONValueMapper instances too in the parameter list of the fetcher function call. These instances have to be callable, they have to have a __call__ method that receives one parameter - the fetched value - and they have to return the transformed (or untouched) value. If you specify more than value value mapper instances then these value mappers are applied to the fetched value in left-to-right order as you specify them in the argument list. You can use these value mapper instances not only to transform the fetched value, but also to perform (type) checks on them. The jsoncfg.value_mappers module contains a few predefined type-checkers but you can create your own value mappers.

Warning

If you specify both a default value and one or more value mapper instances in your value fetcher call then the value mappers are never applied to the default value. The value mappers are used only when you fetch a value that exists in the config. json-cfg uses either the default value or the list of value mapper instances but not both.

from jsoncfg.value_mappers import RequireType
from jsoncfg.value_mappers import require_list, require_string, require_integer, require_number

# require_list is a jsoncfg.JSONValueMapper instance that checks if the fetched value is a list.
# If the "servers" key is missing form the config or its type isn't list then an exception is
# raised because we haven't specified a default value.
python_server_list = config.servers(require_list)

# If the "servers" key is missing from the config then the return value is None. If "servers"
# is in the config and it isn't a list instance then an exception is raised otherwise the
# return value is the servers list.
python_server_list = config.servers(None, require_list)

# Querying the required ip_address parameter with required string type.
ip_address = config.servers[0].ip_address(require_string)

# Querying the optional port parameter with a default value of 8000.
# If the optional port parameter is specified in the config then it has to be an integer.
ip_address = config.servers[0].port(8000, require_integer)

# An optional timeout parameter with a default value of 5. If the timeout parameter is in
# the config then it has to be a number (int, long, or float).
timeout = config.timeout(5, require_number)

# Getting a required guest_name parameter from the config. The parameter has to be either
# None (null in the json file) or a string.
guest_password = config.guest_name(RequireType(type(None), str))

Writing a custom value mapper

• Derive your own value mapper class from jsoncfg.JSONValueMapper.

• Implement the __call__ method that receives one value and returns one value:

  • Your __call__ method can return the received value intact but it is allowed to return a completely different transformed value.

  • Your __call__ implementation can perform validation. If the validation fails then you have to raise an exception. This exception can be anything but if you don’t have a better idea then simply use the standard ValueError or TypeError. This exception will be caught by the value fetcher call and it re-raises another json-cfg specific exception that contains useful error message with the location of the error and that exception also contains the exception you raised while validating.

Custom value mapper example code:

import datetime
import jsoncfg
from jsoncfg import JSONValueMapper
from jsoncfg.value_mappers import require_integer

class OneOf(JSONValueMapper):
    def __init__(self, *enum_members):
        self.enum_members = set(enum_members)

    def __call__(self, v):
        if v not in self.enum_members:
            raise ValueError('%r is not on of these: %r' % (v, self.enum_members))
        return v

class RangeCheck(JSONValueMapper):
    def __init__(self, min_, max_):
        self.min = min_
        self.max = max_

    def __call__(self, v):
        if self.min <= v < self.max:
            return v
        raise ValueError('%r is not in range [%r, %r)' % (v, self.min, self.max))

class ToDateTime(JSONValueMapper):
    def __call__(self, v):
        if not isinstance(v, str):
            raise TypeError('Expected a naive iso8601 datetime string but found %r' % v)
        return datetime.datetime.strptime(v, '%Y-%m-%dT%H:%M:%S')
to_datetime = ToDateTime()

config = jsoncfg.load_config('server.cfg')

# Creating an instance for reuse.
require_cool_superuser_name = OneOf('tron', 'neo')
superuser_name = config.superuser_name(None, require_cool_superuser_name)

check_http_port_range = RangeCheck(8000, 9000)
port = config.servers[0].port(8000, check_http_port_range)

# Chaining value mappers:
port = config.servers[0].port(8000, require_integer, check_http_port_range)

# to_datetime converts a naive iso8601 datetime string into a datetime instance.
superuser_birthday = config.superuser_birthday(None, to_datetime)

Error handling

TODO: Coming soon… This section will describe exceptions and some pitfalls.

Optional utility functions

TODO: Coming soon… The config wrapper objects have no public methods but in some cases you may want to extract some info from them (for example line/column number, type of node). You can do that with utility functions that can be imported from the jsoncfg module.