keba-keenergy-api 1.4.0

A Python wrapper for the KEBA KeEnergy API.

KEBA KeEnergy API

A Python wrapper for the KEBA KeEnergy API.

Getting started

pip install keba-keenergy-api

Usage

import asyncio
from typing import Any

from keba_keenergy_api import KebaKeEnergyAPI
from keba_keenergy_api.constants import HeatCircuitOperatingMode
from keba_keenergy_api.constants import HeatCircuit


async def main() -> None:
    client = KebaKeEnergyAPI(host="YOUR-IP-OR-HOSTNAME", ssl=True)

    # Get current outdoor temperature
    outdoor_temperature: float = await client.get_outdoor_temperature()

    # Get heat circuit temperature from heat circuit 2
    heat_circuit_temperature: float = await client.heat_circuit.get_temperature(position=2)

    # Read multiple values
    data: dict[str, tuple[float | int]] = await client.read_values(
        request=[
            HeatCircuit.TEMPERATURE, 
            HeatCircuit.DAY_TEMPERATURE,
        ],
    )
    
    # Enable "day" mode for heat circuit 2
    await client.heat_circuit.set_operating_mode(mode=HeatCircuitOperatingMode.DAY, position=2)

    # Write multiple values
    await client.write_values(
        request={
            HeatCircuit.DAY_TEMPERATURE: (20, None, 5),  # Write heat circuit on position 1 and 3 
            HeatCircuit.NIGHT_TEMPERATURE: (16,),        # Write night temperature on position 1
        },
    )


asyncio.run(main())

By default, the library creates a new connection to KEBA KeEnergy API with each coroutine. If you are calling a large number of coroutines, an aiohttp ClientSession() can be used for connection pooling:

import asyncio

from keba_keenergy_api import KebaKeEnergyAPI
from keba_keenergy_api.constants import HeatCircuitOperatingMode

from aiohttp import ClientSession

async def main() -> None:
    async with ClientSession() as session:
        client = KebaKeEnergyAPI(host="YOUR-IP-OR-HOSTNAME", session=session, ssl=True)
        ...

asyncio.run(main())

API endpoints

Endpoint	Response	Description
.get_outdoor_temperature()	float	Get outdoor temperature.
.read_values(request, position)		Get multiple values with one http request.
.write_values(request)		Write multiple values with one http request.

Device

Endpoint	Response	Description
.get_device_info()	str	Get all device information.
.get_name()	str	Get name.
.get_serial_number()	int	Get serial number.
.get_revision_number()	int	Get revision name.
.get_variant_number()	int	Get variant name.

Hot water tank

Endpoint	Request/Response	Description
.get_temperature()	float	Get temperature.
.get_operating_mode()	int	Get operating mode as integer (0 is OFF, 1 is AUTO, 2 is DAY and 3 is NIGHT.
.set_operating_mode(0)	int	Set operating mode.
.get_min_temperature()	float	Get minimum temperature.
.set_min_temperature(20)	float	Set minimum temperature.
.get_max_temperature()	float	Get maximum temperature.
.set_max_temperature(22)	float	Set maximum temperature.

Heat pump

Endpoint	Response	Description
.get_status()	int	Get operating mode as integer (0 is STANDBY, 1 is FLOW and 2 is AUTO.
.get_circulation_pump()	float	Get circulation pump in percent.
.get_inflow_temperature()	float	Get inflow temperature.
.get_reflux_temperature()	float	Get reflux temperature.
.get_source_input_temperature()	float	Get source input temperature.
.get_source_output_temperature()	float	Get source output temperature.
.get_compressor_input_temperature()	float	Get compressor input temperature.
.get_compressor_output_temperature()	float	Get compressor output temperature.
.get_compressor()	float	Get compressor in percent.
.get_high_pressure()	float	Get high pressure.
.get_low_pressure()	float	Get low pressure.

Heat circuit

Endpoint	Request/Response	Description
.get_temperature()	float	Get temperature.
.get_day_temperature()	float	Get day temperature.
.set_day_temperature(20)	float	Set day temperature.
.get_day_temperature_threshold()	float	Get day temperature threshold.
.get_night_temperature()	float	Get night temperature.
.set_night_temperature(16)	float	Set night temperature.
.get_night_temperature_threshold()	float	Get night temperature threshold.
.get_holiday_temperature()	float	Get holiday temperature.
.get_offset_temperature()	float	Get offset temperature.
.set_offset_temperature(2)	float	Set offset temperature.
.get_operating_mode()	int	Get operating mode (0 is OFF and 3 is HEAT_UP).
.set_operating_mode(3)	int	Set operating mode.

Changelog

The changelog lives in the CHANGELOG.md document. The format is based on Keep a Changelog.

Contributing

We're happy about your contributions to the project!

You can get started by reading the CONTRIBUTING.md.

Donation

We put a lot of time into this project. If you like it, you can support us with a donation.