konnected 1.1.0

A async Python library for interacting with Konnected home automation controllers (see https://konnected.io)

Konnected Python library

This is a simple Python library to talk to a Konnected device. Konnected is an open-source software for ESP8266 devices that enables simple wired binary sensors and actuators to talk to home automation frameworks such as Home Assistant and SmartThings. The most popular use case for Konnected is to connected a wired home alarm system to your Smart Home hub.

This library was written to support Home Assistant integration.

For more information see konnected.io

Usage

import aiohttp
import asyncio
import konnected

async def fetch(session, url):
    async with session.get(url) as response:
        return await response.text()

async def main():
    async with aiohttp.ClientSession() as session:
        k = konnected.Client('192.168.86.10', '17000', session)

        # Sync settings to the device

        print(await k.put_settings(sensors=[{"pin":1}], actuators=[], auth_token='secureToken', endpoint='http://example.com'))
        # True

        # Get status of each input pin

        print(await k.get_device())  
        # [{'state': 0, 'pin': 1}, {'state': 1, 'pin': 2}]

        # Get status of a single input pin

        print(await k.get_device(2))
        # [{'state': 1, 'pin': 2}]

        # Actuate an output pin

        print(await k.put_device(pin=8, state=1))
        # {'state': 1, 'pin': 8}

        # Get status of each input zone

        print(await k.get_zone())  
        # [{'state': 0, 'zone': 1}, {'state': 1, 'zone': 2}]

        # Get status of a single input zone

        print(await k.get_zone(2))
        # [{'state': 1, 'zone': 2}]

        # Actuate an output zone

        print(await k.put_zone(zone=8, state=1))
        # {'state': 1, 'zone': 8}

        # Get device status

        await k.get_status()
        # {'mac': '2c:3a:e8:43:8a:38', 'gw': '192.168.86.1', 'hwVersion': '2.0.5', 'rssi': -31, 'nm': '255.255.255.0', 'ip': '192.168.86.10', 'actuators': [{'trigger': 1, 'pin': 8}], 'port': 12426, 'uptime': 2349, 'heap': 23904, 'swVersion': '2.1.3', 'sensors': [{'state': 0, 'pin': 1}]}

if __name__ == '__main__':
    loop = asyncio.get_event_loop()
    loop.run_until_complete(main())

Python version

This library was designed to work with Python 3.5 and above.