linien-python-client 0.3.1

Python client for linien spectroscopy lock

LINIEN

Spectroscopy locking of lasers using RedPitaya (STEMlab 125-14) that just works. Linien aims to follow the UNIX philosophy of doing one thing very well. It is built with Python and Migen and is based on RED PID.

Features

• All included: Sinusoidal modulation (up to 50 MHz), demodulation, filtering and servo implemented on the FPGA.
• Client-server architecture: Autonomous operation on RedPitaya. One or multiple GUI clients or python clients can connect to the server.
• Autolock: Click and drag over a line, and Linien will automatically approach it and lock to it.
• Lock detection: Linien is capable of detecting loss of lock.
• Automatic relocking: in that case, it relocks autonomously.
• Machine learning is used to tune the spectroscopy parameters in order to optimize the signal
• Remote-controllable: The client libraries can be used to control or monitor the spectroscopy lock with python.
• Combined FMS+MTS: Linien supports dual-channel spectroscopy that can be used to implement combined FMS+MTS
• Logging: Use linien-influxdb to log the lock status to influxdb.
• Second integrator on (slow) analog output 0
• Additional analog outputs may be used using the GUI or python client (ANALOG_OUT 1, 2 and 3)
• 16 GPIO outputs may be programmed (e.g. for controlling other devices)

Getting started

Linien runs on Windows and Linux. For most users the standalone binaries containing the graphical user interface are recommended. If you want to use the python interface you should install it using pip.

Standalone binary

You can download standalone binaries for windows and linux on the releases page (download the corresponding binary in the assets section of the latest version). On linux you have to mark it as executable before executing:

chmod +x linien-linux*
./linien-linux*

As the linux world is highly heterogeneous, the standalone binary may not work on some systems. In this case flatpak installation (see below) is recommended.

Installation with Flatpak (linux only)

1. Install flatpak
2. Run flatpak install flathub io.github.hermitdemschoenenleben.linien
3. Linien should now have been installed to your applications menu. You can launch it from there.
4. If this doesn't work, run flatpak run io.github.hermitdemschoenenleben.linien

Installation with pip

Linien is written for python 3 and can be installed using python's package manager pip:

pip3 install linien

Run the application by calling

linien

If this doesn't work, your local bin directory (e.g. ~/.local/bin) is probably missing in your PATH. In this case you can open Linien with python:

from linien.gui.app import run_application
run_application()

In case you're only interested in the python client and don't want to install the graphical application, you can use

pip3 install linien-python-client

Physical setup

The default setup looks like this:

You can also configure linien for different setups, e.g. if you want to have the modulation frequency and the control on the same output. Additionally, it is possible to set up a slow integrator on ANALOG OUT 0 (0 V to 1.8 V).

Using the application

First run: connecting to the RedPitaya

After launching the application you have to set up a new device. The host address is given by

rp-XXXXXX.local

, where XXXXXX are the last 6 digits of the device's MAC address. You will find them on a sticker on the ethernet port:

Default value for user name and password is root.

When connecting to a RedPitaya for the first time, the application offers you to install the server component on the device. Please note that this requires internet access on the RedPitaya (not only LAN access).

After installation of the server libraries, Linien will start the server and connect to it. You never need to start or stop anything on the server manually as the client automatically takes care of this.

The server operates autonomously: closing the client application doesn't have any influence on the lock status. You may also start multiple clients connecting to the same server.

Setting things up

Using the autolock

In order to use the autolock, you should enter some PID parameters first. Note that the sign of the parameters is determined automatically. After clicking the green button, you can select the line you want to lock to by clicking and dragging over it. The autolock will then center this line, decrease the scan range and try to lock to the middle between minimum and maximum contained in your selection.

The following options are available:

• Determine signal offset: If this checkbox is ticked, the autolock will adapt the y-offset of the signal such that the middle between minimum and maximum is at the zero crossing. This is especially useful if you have a large background signal (e.g. the Doppler background in FMS spectroscopy).
• Check lock: Directly after turning on the lock, the control signal is investigated. If it shifts too much, the lock is assumed to have failed.
• Watch lock: This option tells the Linien to continuously watch the control signal when the laser is locked. If steep changes are detected, a relock is initiated.

If you experience trouble with the autolock, this is most likely due to a bad signal to noise ratio or strong laser jitter.

Using the manual lock

If you have problems with the autolock, you can also lock manually. For that, use the manual controls in the top (Zoom and Position) to center the line you want to lock to. Then, select whether the target slope is rising or falling and click the green button.

Optimization of spectroscopy parameters using machine learning

Linien may use machine learning to maximize the slope of a line. As for the autolock, you have to click and drag over the line you want to optimize. Then, the line is centered and the optimization starts. Please note that this only works if initially a distinguished zero-crossing is visible.

Scripting interface

In addition to the GUI, Linien can also be controlled using python scripts. For that purpose, installation via pip is required (see above).

Then, you should start the Linien server on your RedPitaya. This can be done by running the client and connecting to the device (see above). Alternatively, you may connect via SSH and execute linien_start_server on the RedPitaya.

Once the server is up and running, you can connect using python:

from linien.client.connection import LinienClient, MHz, Vpp
c = LinienClient(
    {'host': 'rp-XXXXXX.local', 'username': 'root', 'password': 'root'}, autostart_server=True,
    restore_parameters=False
)

# read out the modulation frequency
print(c.parameters.modulation_frequency.value / MHz)

# set modulation amplitude
c.parameters.modulation_amplitude.value = 1 * Vpp
# in the line above, we set a parameter. This is not written directly to the
# FPGA, though. In order to do this, we have to call write_data():
c.connection.root.write_data()

# additionally set ANALOG_OUT_1 to 1.2 volts DC (you can use this to control other devices of your experiment)
c.parameters.analog_out_1.value = 1.2 * ANALOG_OUT_V

# GPIO outputs can also be set
c.parameters.gpio_p_out.value = 0b11110000 # 4 on, 4 off
c.parameters.gpio_n_out.value = 0b01010101 # 4 on, 4 off

# again, we have to call write_data in order to write the data to the FPGA
c.connection.root.write_data()

# plot control and error signal
import pickle
from matplotlib import pyplot as plt
plot_data = pickle.loads(c.parameters.to_plot.value)

# depending on the status (locked / unlocked), different signals are available
print(plot_data.keys())

# if unlocked, signal1 and signal2 contain the error signal of channel 1 and 2
# if the laser is locked, they contain error signal and control signal.
if c.parameters.lock.value:
    plt.title('laser is locked!')
    plt.plot(plot_data['control_signal'], label='control signal')
    plt.plot(plot_data['error_signal'], label='error signal')
else:
    plt.title('laser is ramping!')
    plt.plot(plot_data['error_signal_1'], label='error signal channel 1')
    plt.plot(plot_data['error_signal_2'], label='error signal channel 2')

plt.legend()
plt.show()

For a full list of parameters that can be controlled or accessed have a look at parameters.py.

Updating Linien

Before installing a new version of linien, open the previously installed client and click the "Shutdown server" button. Don't worry, your settings and parameters will be saved. Then you may install the latest client on your local PC as described in the getting started section above. The next time you connect to RedPitaya, Linien will install the matching server version.

Development

git clone https://github.com/hermitdemschoenenleben/linien.git

Then, create a file named checked_out_repo/linien/VERSION which contains

dev

(no newlines).

This ensures that local changes of the server's code are automatically uploaded to RedPitaya when you launch the client. Please note that this only h

Architecture

Linien contains three components:

• The client: Connects to the server, runs the GUI, etc.
• The server: Handles connections from the client, runs long-running tasks like the autolock or the optimization algorithm. Connects to the acquisition process for communication with the FPGA.
• The acquisition process: Handles the low-level communication with the FPGA (reading / writing registers)

The communication between the components takes place using rpyc.

For development purposes, you can run the first two components on your local machine to simplify debugging. Only the acquisition process has to run on the RedPitaya. In a production version of linien, server and acquisition process run on RedPitaya.

Running the code

Before running the development version check that no production version of the server is running on the RedPitaya by executing linien_stop_server on the RedPitaya. Now you need to have an FPGA bitstream at linien/server/linien.bin. You have two choices:

• Build the gateware: this makes sense if you want to change the FPGA programming.
• Use the gateware of the latest release: if you just want to work on the python client or server code without touching the FPGA gateware, this approach is right for you as it is way easier:
  • Install linien-server using pip: pip3 install linien-server
  • Find out where it was installed to: python3 -c "import linien; print(linien.__path__)"
  • In that folder go to linien/server and copy this file to your development server folder.

Now you can launch the client

python3 linien/client/client.py

and you can connect to your RedPitaya. If you have set checked_out_repo/linien/VERSION to dev (see above), this automatically uploads your local code to the RedPitaya and starts the server. The FPGA bitstream will also be transferred to the RedPitaya and loaded on the FPGA.

Run server locally

For debugging it may be helpful to execute the server component on your machine (e.g. if you want to work on the autolock and want to plot the spectra). In order to make this work, you have to start /linien/server/acquisition_process.py on your RedPitaya using SSH. This process provides remote access to the FPGA registers. Then, you can run the server locally and connect to the FPGA registers:

python3 server/server.py --remote-rp=root:[e-mail]

Now, you can start the client. Important: Be sure not to connect your client to the RedPitaya, but to "localhost" instead.

Fake server

If you just want to test the GUI, there is also a fake server that you can run locally on your machine:

python3 server/server.py --fake

This fake server just outputs random data. Then you can connect to "localhost" using the client.

Building the FPGA image

For building the FPGA image, you need to install Xilinx Vivado first. Then, call scripts/build_gateware.sh. In the end, the bitstream is located at linien/server/linien.bin. Note: So far, this was tested only with Linux. It should work on Windows 10, though, when calling the script inside Windows Powershell.

Releasing a new version

First, update the version number in the checked_out_repo/linien/VERSION file. Then you can build and upload the package to pypi using scripts/upload_pypi.sh. Finally, build the standalone client using build_standalone_client.sh (you have to do this on the platform you want to build the standalone client for). When on Windows 10, both scripts have to be started in Windows Powershell. In the end, the standalone client should be uploaded to a github release.

Troubleshooting

Connection problems

If the client fails to connect to a RedPitaya, first check whether you can ping it by executing

ping rp-f0xxxx.local

in a command line. If this works, check whether you can connect via SSH. On Windows, you have to install a SSH client, on linux you can execute

ssh rp-f0xxxx.local

on the command line.

FAQs

Can I run linien and the RedPitaya web application / scpi interface at the same time

No, this is not possible as linien relies on a customized FPGA bitstream.

What control bandwidth is achievable with linien?

The propagation delay is roughly 300 ns, thus approximately 3 MHz bandwidth are possible.

Troubleshooting

Updating or installing fails

• make sure that your RedPitaya is connected to the internet
• if the orange LED stops blinking and RedPitaya becomes unresponsive, your SD card is probably faulty

Citation

@misc{linien,
  author = {Benjamin Wiegand},
  title = {Linien,
  year = {2020},
  publisher = {GitHub},
  journal = {GitHub repository},
  howpublished = {\url{https://github.com/hermitdemschoenenleben/linien}}
}

See Also

• RedPID: the basis of linien