linux-thermaltake-rgb 0.0.5.post1543076219

python driver and daemon for thermaltake hardware products

# Linux driver and daemon for Thermaltake Riing

## Compatibility
currently supported devices are (as they show up in thermaltakes TTRGBPLUS software:
Riing Plus
Flow Riing RGB
If your's isnt listed, please create an issue and I'll implement it ASAP!!

## Installation

### Pypi
The setup file will create the systemd user unit, and udev rule
`sudo pip install linux-thermaltake-rgb`

then add your user to the `plugdev` group - `sudo usermod -a -G plugdev <user>`

then reconnect your device. (you may need to log out and back in so your
user is recognised as being in the `plugdev` group

## Configuration
default configuration is in `/etc/linux_thermaltake_rgb/config.yml`
edit and configure suitably.

example config:

```
# specify <port_number>:<device_type>
# port number, referring to the usb hub controller your fans connect too.
devices:
1: Riing Plus
2: Riing Plus
3: Riing Plus
4: Riing Plus
5: Floe Riing RGB

# these are passed directly into the fan controller factory method in `daemon.fan_manager`
# and as such, are just kwargs.
fan_controller:
type: temp_target
target: 20
sensor_name: k10temp
multiplier: 5

# alternatively, you can set a permanent speed
# fan_controller:
# type: locked_speed
# speed: 80

# same as fan_controller, these are kwargs passed into the lighting_manager factory method.
lighting_controller:
type: static
r: 50
g: 0
b: 0
```