lmcv-tools 0.0.26

Command line tool that provides useful functionalities to LMCV Members

LMCV Tools

1 - Introduction

LMCV Tools is a command line tool that provides a series of useful functionalities for the day-to-day simulations of the "Laboratório de Mecânica Computacional e Visualização" of the "Universidade Federal do Ceará" (UFC).

1.1 - Install

$ pip install lmcv_tools

1.2 - Update to Last Version

$ pip install --upgrade lmcv_tools

1.3 - Build and Install from Source

$ pip install build
$ python -m build
$ pip install dist/[name of wheel file].whl

1.4 - How to Use

Once installed, the basic form of the LMCV Tools commands is:

$ lmcv_tools [command] [flags] [args]

To check the installed version, use the command below:

$ lmcv_tools version

To get help, it's possible use the following command:

$ lmcv_tools help

To start Interactive Mode, do not type any command and then you can type multiple commands in sequence:

$ lmcv_tools
[Welcome Message]
>> [command]
output
>> [other command]
other output

For more complex commands, check out the detailed descriptions in the next section.

---

2 - Complex Commands

Considering that the routine activities for which LMCV Tools was developed are quite varied, specific commands were developed for each one of them. These commands are:

• translate (in implementation)
• extract (in implementation)
• generate (in implementation)
• reorder
• change (in implementation)

2.1 - Translate

The command translate, in short, aims to convert different types of files used in LMCV.

Its usage is quite simple:

$ lmcv_tools translate [path/to/file] to [extension]

2.1.1 - Translate .inp to .dat

Abaqus is a suite for Finite Element Analysis (FEA) developed by "Dassault Systèmes", while FAST is a console based FEA tool developed by "Laboratório de Mecânica Computacional e Visualização" of "Universidade Federal do Ceará" (UFC). Both of these softwares can simulate complex problems, but FAST has a clear disadvantage: differently of Abaqus, it hasn't a native GUI to generate its meshes. With that in mind, this command specifically seeks to translate meshes generated in Abaqus and exported in .inp format into meshes in .dat format to be used in FAST simulations.

Example:

$ lmcv_tools translate Job-1.inp to .dat

2.1.2 - Translate .dat to .svg

Articles for scientific publications in the LMCV study field generally require images of the used meshes. Generating bitmat images in PNG format is a valid possibility, but for very discretized meshes this approach results in loss of details. Thinking about it, this command translates .dat files of plate and shell meshes to the SVG (Scalable Vector Graphics) image format, which does not lose quality with zoom (perfect for meshes with many elements).

Example:

$ lmcv_tools translate Plate.dat to .svg

In addition, this command has some flags:

Flags	Description
-p or --projection	Type of projection: parallel or perspective (default: parallel).
-x	X-coordinate of the projection center (perspective projection).
-y	Y-coordinate of the projection center (perspective projection).
-z	Z-coordinate of the projection center (perspective projection).
--Rx	A rotaion in x-axis.
--Ry	A rotaion in y-axis.
--Rz	A rotaion in z-axis.

Examples:

$ lmcv_tools translate Plate.dat to .svg --projection=parallel

$ lmcv_tools translate Plate.dat to .svg -p=perspective -x=0 -y=0 -=30

$ lmcv_tools translate Plate.dat to .svg --Rx=45.0 --Ry=30.0

$ lmcv_tools translate Plate.dat to .svg -p=perspective -x=0 -y=20 -=40.0 --Rx=45.0 --Ry=30.0 --Rx=34

The use of these flags must consider the following points:

• The projection plane will always be the x-y plane.
• The -x, -y and -z flags are only necessary if the projection type is “perspective”.
• The coordinates provided in the -x, -y and -z flags are relative to the mesh centroid.
• The flags --Rx, --Ry and --Rz can be written in any order and can even be repeated.
• The rotations described by --Rx, --Ry, and --Rz will be executed in the order they were written.

2.2 - Extract

The command extract, in short, aims to extract data from .pos (or .dat) files generated by FAST and save this data in CSV format.

Files with extension ".pos" are the standard output from FAST simulations. They can store data about nodal displacements, element stresses, gauss points stresses and other informations, all distributed over a series of steps. In some contexts, it is necessary to obtain specific data from these files, but the manual search can take a lot of time and still fail. Alternatively, this command allows to extract entire set of related atributes by a simple expression.

An extraction expression can be broken down into terms:

• Keywords
• Attributes
• Condition

Keywords are a set of words that define the commmand syntax. In this command, the keywords are "from", "where" and "to" (the last two are optional). Examples of valid syntaxes are:

$ lmcv_tools extract [atributes] from [path/to/.pos]
$ lmcv_tools extract [atributes] from [path/to/.pos] to [path/to/.csv]
$ lmcv_tools extract [atributes] from [path/to/.pos] where [condition]
$ lmcv_tools extract [atributes] from [path/to/.pos] where [condition] to [path/to/.csv]

Attributes are names that represent a piece of data from a .pos file. The supported attributes are:

Attribute	Type	Sub-Type	Related Attributes
step.id	int	-	-
step.factor	float	-	step.id
node.id	int	-	-
node.coord	list	float	node.id
step.node.displacement	list	float	step.id, node.id
step.gauss.scalar	list	str	step.id
step.nodal.scalar	list	str	step.id
element.id	int	-	-
element.info	list	int	element.id
step.element.gauss.scalar.data	list	float	step.id, element.id
step.element.nodal.scalar.data	list	float	step.id, element.id
buckling.id	int	-	-
buckling.factor	float	-	buckling.id
buckling.node.displacement	list	float	buckling.id, node.id
vibration.id	int	-	-
vibration.factor	float	-	vibration.id
vibration.node.displacement	list	float	vibration.id, node.id
material.id	int	-	-
material.isotropic.E	float	-	material.id
material.isotropic.poisson	float	-	material.id, material.isotropic.E
section.id	int	-	-
section.bar.circle.radius	float	-	section.id

Attributes that share any related attributed can be related in order which they were typed. Example:

$ lmcv_tools extract step.id step.factor step.node.displacement[0] from Example.pos

Condition is a series of attribute constraints. They can be written intuitively using attributes, operators and test values after "from" keyword. The supported operators are:

Operator	Meaning
and	Logical and.
or	Logical or.
=	Relational equal to.
>	Relational gerater than.
<	Relational less than.
>=	Relational gerater than or equal to.
<=	Relational less than or equal to.
!=	Relational different from.
in	Relational membership.

Remembering that the symbols ">" and "<" must be encapsulated by quotes. Otherwise, they will be interpreted by the shell as redirection operators.

Examples:

$ lmcv_tools extract step.factor from Example.pos where step.id ">" 2

$ lmcv_tools extract step.factor from Example.pos where step.id != 3 and step.factor ">" 3

2.3 - Generate

The command generate, in short, aims to create special artifacts.

Artifact is a broad term for anything that can be useful for LMCV simulations. They can be file templates, dynamically generated file parts or anything else that needs a shortcut to create.

Possible Syntaxes:

$ lmcv_tools generate [artifact name]
$ lmcv_tools generate [artifact name] [args] [path/to/artifact]

Implemented artifacts are listed below:

• virtual_laminas
• cuboid

2.3.1 - Virtual Laminas

Virtual Laminas (virtual_laminas) are a model that approximates the behavior of a Functionally Graded Material. The idea is to represent these materials as a stack of isotropic homogeneous laminas. The more laminas used, the more accurate the simulation results. However, tools like Abaqus or FAST do not have a fast and automated way to generate these laminas, so this artifact was developed as a solution.

This syntax below will start a graphical interface to facilitate the process of passing arguments:

$ lmcv_tools generate virtual_laminas

Other syntax possible is based in a long and exaustive list of required arguments:

$ lmcv_tools generate virtual_laminas [params] [path/to/virtual_laminas]

Parameters	Type	Description
Laminas Count	int	Total number of laminas.
Laminas Thickness	float	Thinkcness of laminas.
Power Law Exponent	float	Exponent of Power Law.
Micromechanical Model	str	Model to calculate effective properties.
Element Type	str	Supported: Solid, Shell.
E1	float	Elastic Modulus of Material 1.
E2	float	Elastic Modulus of Material 2.
nu1	float	Poisson's Coefficient of Material 1.
nu2	float	Poisson's Coefficient of Material 2.
pho1	float	Density of Material 1.
pho2	float	Density of Material 2.
Smart Laminas	bool	If True, a new smart generation method will be used.

Supported Micromechanical Models:

• voigt
• mori_tanaka
• hashin_shtrikman_lower_bound
• hashin_shtrikman_upper_bound

2.3.2 - Rectangle

Rectangles are geometric shapes frequently used in simulation tests. Therefore, this artifact was created to allow the generation of finite element meshes of rectangles in .dat format.

Proper Syntax:

$ lmcv_tools generate rectangles [params] [path/to/cuboid]

Parameters	Type	Description
Element Type	str	Supported: Q8.
Width	float	Cuboid Width (x).
Height	float	Cuboid Height (y).
Nx	int	Number of Elements in Width.
Ny	int	Number of Elements in Height.

2.3.3 - Cuboid

Cuboids are geometric shapes frequently used in simulation tests. Therefore, this artifact was created to allow the generation of finite element meshes of cuboids in .dat format.

Proper Syntax:

$ lmcv_tools generate cuboid [params] [path/to/cuboid]

Parameters	Type	Description
Element Type	str	Supported: BRICK20.
Width	float	Cuboid Width (x).
Height	float	Cuboid Height (y).
Deep	float	Cuboid Deep (z).
Nx	int	Number of Elements in Width.
Ny	int	Number of Elements in Height.
Nz	int	Number of Elements in Deep.

2.3.4 - NURBS Rectangles

NURBS Rectangles are geometric shapes frequently used in simulation tests. Therefore, this artifact was created to allow the generation of NURBS meshes of Rectangles in .dat format.

Proper Syntax:

$ lmcv_tools generate cuboid [params] [path/to/nurbs_rectangle]

Parameters	Type	Description
Dx	int	Degree in Width.
Dy	int	Degree in Height.
Width	float	Cuboid Width (x).
Height	float	Cuboid Height (y).
Nx	int	Number of Elements in Width.
Ny	int	Number of Elements in Height.

2.3.5 - NURBS Cuboid

NURBS Cuboids are geometric shapes frequently used in simulation tests. Therefore, this artifact was created to allow the generation of NURBS meshes of Cuboids in .dat format.

Proper Syntax:

$ lmcv_tools generate cuboid [params] [path/to/nurbs_cuboid]

Parameters	Type	Description
Dx	int	Degree in Width.
Dy	int	Degree in Height.
Dz	int	Degree in Deep.
Width	float	Cuboid Width (x).
Height	float	Cuboid Height (y).
Deep	float	Cuboid Deep (z).
Nx	int	Number of Elements in Width.
Ny	int	Number of Elements in Height.
Nz	int	Number of Elements in Deep.

2.4 - Reorder

The command reorder, in short, aims to add a node solver order in .dat files to reduce the stiffiness matrix bandwidth and, consequently, the time spent to execute the simulation.

Considering that computational simulations based on the finite element method involve the solution of a system of linear equations, it is possible to reduce the execution time of these simulations by also reducing the bandwidth of the stiffness matrix that represents the linear system. A valid approach for this is the reordering of the nodes that make up the simulation mesh. Thus, this command allows generating a reordering of nodes (a new node solver order) from different methods.

Possible Syntax:

$ lmcv_tools reorder [method] [path/to/.dat]

Example:

$ lmcv_tools reorder rcm simulation.dat

Possible Flags:

Flag	Function
-i or --info	Show info about bandwidth reduction and execution time

Supported Reordering Methods:

Keyword	Method
rcm	[1] Reverse Cuthill-McKee
sloan	[2] Sloan
boost_rcm	Boost C++ Library Implementation of Reverse Cuthill-McKee Algorithm
boost_sloan	Boost C++ Library Implementation of Sloan Algorithm

2.5 - Change

The command change, in short, aims to change certain values from .dat (or .pos) files generated by FAST.

Files with extension ".dat" are the standard input from FAST simulations. They can store data about nodal coordinates, material properties, section details and other informations. In some contexts, it is necessary to change specific data from these files, but the manual process can take a lot of time and still fail. Alternatively, this command allows to precisely change specific atributes by a simple expression.

In a similar way to the command extract, a change expression can be broken down into terms:

• Keywords
• Attributes
• Condition

Keywords are a set of words that define the command syntax. In this command, the keywords are "to", "in" and "where" (the last is optional). Examples of valid syntaxes are:

$ lmcv_tools change [atribute] to [value] in [path/to/.dat]
$ lmcv_tools change [atribute] to [value] in [path/to/.pos] where [condition]

Attributes are names that represent a piece of data from a .dat (or .pos) file. They are the same as those used in the extract command. Example:

$ lmcv_tools change material.isotropic.poisson to 0.3 in Example.dat

Condition is a series of attribute constraints. They can be written intuitively using attributes, operators and test values after "from" keyword, just like the command extract. However, in this specific case, only attributes related to the attribute that will be changed can be used in condition expressions. Example:

$ lmcv_tools change material.isotropic.poisson to 0.3 in Example. where material.id = 2

3 - References

• [1] CUTHILL, E.; MCKEE, J.. Reducing the bandwidth of sparse symmetric matrices. Proceedings of The 1969 24th National Conference, Washington, p. 157-172, 26 ago. 1969. ACM Press. http://dx.doi.org/10.1145/800195.805928.
• [2] SLOAN, S. W.. An algorithm for profile and wavefront reduction of sparse matrices. International Journal for Numerical Methods in Engineering, Newcastle, v. 23, n. 2, p. 239-251, fev. 1986. Wiley. http://dx.doi.org/10.1002/nme.1620230208.