log-rate-limit 1.2.2

Limit excessive log output with Python's standard logging framework.

log-rate-limit - limit excessive log output

A logging filter using Python's standard logging mechanisms to rate-limit logs - i.e. suppress logs when they are being output too fast.

Log commands are grouped into separate streams that will each have their own rate limitation applied without affecting the logs in other streams. By default every log message is assigned a unique stream so that only repeated log messages will be suppressed.

However, logs can also be assigned streams manually to achieve various outcomes:

• A log can be assigned to an undefined/None stream so that rate-limiting doesn't apply to it.
• Logs in different parts of the code can be grouped into the same stream so that they share a rate-limit, e.g. when they all trigger due to the same issue and only some are needed to indicate it.

The default can also be changed so that rate-limiting is disabled by default and only applies to logs for which a stream_id has been manually set.

Quick usage

Import the filter:

from log_rate_limit import StreamRateLimitFilter, RateLimit

Use the filter with your logger. With default parameters it will rate limit all repetitive log message:

logger.addFilter(StreamRateLimitFilter(period_sec=30))

All logs on logger will now be rate limited, but this can be disabled per-log by setting the stream_id to None:

logger.warning("Something went wrong!", extra=RateLimit(stream_id=None))

Usage examples

Rate-limiting by default

Example of rate-limiting with default options where each log message is assigned to its own stream:

import time
import logging
from log_rate_limit import StreamRateLimitFilter, RateLimit
# Setup logging
logging.basicConfig()
logger = logging.getLogger(__name__)

# Add our filter
logger.addFilter(StreamRateLimitFilter(period_sec=1))
# Log many warnings
for _ in range(100):
    logger.warning("Wolf!")
for i in range(100):
    logger.warning("No really, a wolf!")
    if i == 98:
        time.sleep(1)
# Prevent rate-limited by setting/overriding the stream to be undefined (None)
for _ in range(3):
    logger.warning("Sheep!", extra=RateLimit(stream_id=None))

Which only outputs the following:

WARNING:__main__:Wolf!
WARNING:__main__:No really, a wolf!
WARNING:__main__:No really, a wolf!
+ skipped 98 logs due to rate-limiting
WARNING:__main__:Sheep!
WARNING:__main__:Sheep!
WARNING:__main__:Sheep!

Note that (unless overridden) logs were only repeated after the sleep() call, and the repeated log also included an extra summary message added afterwards.

When we override rate-limiting above, you'll see our filter reads dynamic configs from logging's extra parameter.

Be very careful not to forget the extra= name part of the argument, as then the logging framework will assume you're passing arguments meant for formatting in the logging message and your options will silently be ignored!

Rate-limit only when specified

If you want most of your logs to be unaffected and you only have some you want to specifically rate-limit, then you can do the following:

import logging
from log_rate_limit import StreamRateLimitFilter, RateLimit
# Setup logging
logging.basicConfig(level=logging.INFO)
logger = logging.getLogger(__name__)

# Add our filter, but don't assign unique streams to logs by default
logger.addFilter(StreamRateLimitFilter(period_sec=1, default_stream_id=None))
# Normal logs are now not rate-limited
for i in range(3):
    logger.info(f"Status update: {i}")
# Only those we manually assign a stream will be rate-limited
for _ in range(3):
    logger.warning("Issue!", extra=RateLimit(stream_id="issue"))

Which only outputs the following:

INFO:__main__:Status update: 0
INFO:__main__:Status update: 1
INFO:__main__:Status update: 2
WARNING:__main__:Issue!

Dynamically override configuration options

Some options set during creation of the initial filter can be overridden for individual log calls. This is done by adding the extra parameter to any specific log call, e.g.:

# Override the rate limit period for this specific log call
logger.warning("Test1", extra=RateLimit(stream_id="stream1", period_sec=30))
# Override the allow_next_n value for a set of logs in the same stream so that this group of logs don't restrict one
# another from occuring consecutively
logger.warning("Test", extra=RateLimit(stream_id="stream2", allow_next_n=2))
logger.info("Extra", extra=RateLimit(stream_id="stream2"))
logger.debug("Info", extra=RateLimit(stream_id="stream2"))

If you want to set custom options for a large group of log calls without repeatedly adding the extra parameter, it's possible to use a LoggerAdapter:

import logging
from log_rate_limit import StreamRateLimitFilter, RateLimit

logging.basicConfig(level=logging.INFO)
logger = logging.getLogger(__name__)
# Add our filter
logger.addFilter(StreamRateLimitFilter(period_sec=1))

# Use LoggerAdapter to assign additional "extra" parameters to all calls using this logger
global_extra = RateLimit(stream_id="custom_stream", period_sec=20)
logger = logging.LoggerAdapter(logger, global_extra)
# Log many warnings
for _ in range(100):
    logger.warning("Wolf!")
for i in range(100):
    logger.warning("No really, a wolf!")

Which merely outputs:

WARNING:__main__:Wolf!

Since both log calls are in the same stream.

Alternatively (to a LoggerAdapter), custom options can also be added by writing your own logging.Filter.

Dynamic stream ID

Dynamic stream IDs can be assigned based on any criteria you want, e.g.:

logger.warning(f"Error occured on device {device_id}!", extra=RateLimit(stream_id=f"error_on_{device_id}"))

Installation

Install from PyPI

With Python 3 installed on your system, you can run:

pip install log-rate-limit

To test that installation worked, you can run:

python -c "import log_rate_limit"

and you can uninstall at any time with:

pip uninstall log-rate-limit

To install with poetry:

poetry add log-rate-limit

Install from Github

To install the newest code directly from Github:

pip install git+https://github.com/samuller/log-rate-limit