luxconnector 1.0.0

This is a python wrapper around the Lux Client windows solution

luxconnector

This is a python wrapper for the Lux Client windows solution. The package will only work on Windows.

Installation

To install this package follow the these steps:

Step 1: Divers

Make sure you have or had a CytoSmart application installed. This is needed to have all the correct drivers installed. It doesn't matter if the app is uninstalled afterwards.

Step 2: pip install

pip install luxconnector

Usage

Initialization

Make sure at least one lux is physically connected to your computer via a USB3 port. The luxconnector is an object that maintains the connection with the Lux. To create the object use the following code:

from luxconnector import LuxConnector
connector = LuxConnector(number_of_devices=2)

NOTE: Make sure number_of_devices is at least the number of devices you have connected. If not the luxconnector will look for the missing devices forever.

Getting serial numbers

Each physical device has a serial number. This number is needed to send commands to a specific device.

serial_numbers = connector.get_all_serial_numbers()

Getting a single image

When you want a single image taken at this moment use get_image. This will return the image as a pillow image. You need to give the serial number of the device you want to target

img = connector.get_image(serial_number)

Changing the focus

This function will change the focus for the luxconnector object. Every image taken after this function will have the new focus.

The focus is in the range 0 until 1. (0.0 and 1.0 are valid entries)

You need to give the serial number of the device you want to target

connector.set_focus(serial_number, 0.5)
img1 = connector.get_image(serial_number) # Image with focus of 0.5
connector.set_focus(serial_number, 0.7)
img2 = connector.get_image(serial_number) # Image with focus of 0.7
img3 = connector.get_image(serial_number) # Image with focus of 0.7

Getting the temperature

This function returns the temperature in celsius of the device.

You need to give the serial number of the device you want to target

temperature = connector.get_temperature(serial_number)

Getting a z-stack

This function will return a list of pillow images. Each image will be at a different focus level.

This code will create a z-stack of 6 images. The focuses of these images will be [0.5, 0.6, 0.7, 0.8, 0.9, 1.0]

You need to give the serial number of the device you want to target

list_of_imgs = connector.get_z_stack(serial_number, num_img = 6, start_focus = 0.5, stop_focus = 1)

Changing zoom modes

There are 2 zoom modes: "IN" and "OUT". While zoomed in the resolution is higher but the ROI is smaller, zoomed out has a higher ROI but a lower resolution.

Changing this will change it for every image or z-stack taken afterwards.

You need to give the serial number of the device you want to target

connector.set_zoom(serial_number, "IN")
img1 = connector.get_image(serial_number) # Image is zoomed in
connector.set_zoom(serial_number, "OUT")
img2 = connector.get_image(serial_number) # Image is zoomed out

Live view

The live view of the Lux is hosted at http://localhost:3333/luxservice/live. This image can only been seen if the live view is turned on (by default the live view is turned on).

You need to give the serial number of the device you want to target

connector.set_liveview(serial_number, True) # in the browser you can see the image being updated
connector.set_liveview(serial_number, False) # Led of Lux turns off till you take a picture

Developers

Developers of the luxconnector please look at the developers readme

Credits

• Tom Nijhof
• Kyap
• Nora

History

1.0.0 (2020-09-15)

• Added multi lux support
• Changed output from numpy array to pillow
• Require serial number with function to get information
• Add get_temperature

0.1.2 (2020-06-30)

• Rename failing to pinging in print statement

0.1.1 (2020-06-11)

• Update documentation
• Make setup.py fit for PyPI

0.1.0 (2020-05-20)

• Update lux server to latest version

0.0.3 (2020-03-30)

• bugfix: files were not copied into package on linux

0.0.2 (2020-03-24)

• Bugfix: stop waiting for response after sending a message

0.0.1 (2020-03-16)

• Add function: Copy the luxconnector
• Add function: focus change option
• Add function: z-stack
• Bugfix: add lux app to manifest

0.0.0 (2020-03-13)

Copied basic package a start of luxconnector