m1-8-writer 0.9.0

LED name badge writer.

M1-8 writer

Target Device

This script can write to LED name badge which ...

• has 12x48 LED matrix display (untested on 11x44).
• shows "M1-8" at startup.
• can be written by "LED Display" and "Mini LED Display".

LED Display:

Mini LED Display:

Data Structure

Header

[
    0x41, 0x68, 0x65, 0x6c, 0x6c, 0x6f,  # magic number: Ahello
    0x00,  # brightness: the brightest 0x00 --- 0x01 --- 0x02 --- 0x03 the dimmest
    0x00,  # NOP
    # slot 1-8 have their own display modes
    # 0b10000000: show border
    # 0b01110000: speed
    # 0b00001000: blink
    # 0b00000111: motion (left/right/up/down/freeze/animation/snow/curtain)
    0b00110000,  # mode of slot 1
    0b00110110,  # mode of slot 2
    0b00110111,  # mode of slot 3
    0b00110000,  # mode of slot 4
    0b00110000,  # mode of slot 5
    0b00110100,  # mode of slot 6
    0b00110110,  # mode of slot 7
    0b00110111,  # mode of slot 8
    0x00,  # NOP
    # number of columns (8 pixels/column) and offset of slot 1-8
    0x00, 0, 0x00, 1,  # columns and offset of slot 1 bitmap
    0x00, 1, 0x00, 2,  # columns and offset of slot 2 bitmap
    0x00, 3, 0x00, 3,  # columns and offset of slot 3 bitmap
    0x00, 6, 0x00, 4,  # columns and offset of slot 4 bitmap
    0x00, 10, 0x00, 5,  # columns and offset of slot 5 bitmap
    0x00, 15, 0x00, 6,  # columns and offset of slot 6 bitmap
    0x00, 21, 0x00, 7,  # columns and offset of slot 7 bitmap
    0x00, 28, 0x00, 8,  # columns and offset of slot 8 bitmap
    # laser mode of slot 1-8
    # 0b00000001: laser on slot 1
    # 0b00000010: laser on slot 2
    # ...
    # 0b10000000: laser on slot 8
    # motion of laser mode slot must be 000 (otherwise stop on the slot)
    0b00001000,
    0x00, 0x00, 0x00, 0x00,  # NOP
]

Body

Bitmap data are splitted line by line from the top and each line is splitted every 8 pixels from the left. 8-pixel data is represented as 1-byte packet. The left pixel is the high-order bit.

# a 32px (=8*4) wide bitmap
[
    0b10101010, packet_002, packet_003, packet_004,  # line 1
    packet_005, packet_006, packet_007, packet_008,  # line 2
    packet_009, packet_010, packet_011, packet_012,  # line 2
    #         ... line by line ...
    0b10001000, 0b11001100, 0b11110000, 0b10110111
]

The first packet of data 0b10101010 represents * * * * in top left corner and the last packet of data 0b10110111 represents * ** *** in bottom right corner (* is lit pixel).

Each bitmap data is written in parallel line by line from the top.

bitmap_003_line_002 represents the 2nd line data of the 3rd bitmap.

# 4 bitmaps
[
    bitmap_01_line_01, bitmap_02_line_01, bitmap_03_line_01, bitmap_04_line_01,
    bitmap_01_line_02, bitmap_02_line_02, bitmap_03_line_02, bitmap_04_line_02,
    bitmap_01_line_03, bitmap_02_line_03, bitmap_03_line_03, bitmap_04_line_03,
    #                          ... line by line ...
    bitmap_01_line_nn, bitmap_02_line_nn, bitmap_03_line_nn, bitmap_04_line_nn,
]

NOTE: You need to insert 32 bytes of null after the 16 byte of body.

Feature

• Brightness: 1, 2, 3, 4 (for all bitmap)
• Write up to 8 bitmaps
  • Motion: left, right, up, down, freeze, animation, snow, curtain, laser
  • Speed: 1, 2, 3, 4, 5, 6, 7, 8
  • Option: show border, blink

Requirement

• pyserial 3.4
• Pillow 7.0.0

Usage

Write 1 bitmap to slot 1:

m18write image.png

... and show bitmap brightest:

m18write --brightness 4 image1.png

... and show bitmap in maximum speed:

m18write --speed1 8 image.png

... and move bitmap left to right:

m18write --motion1 right image.png

Write 4 bitmaps to slot 1, 2, 3 and 4:

m18write image1.png image2.png image3.png image4.png

Write 2 bitmaps to slot 1 and 2, blink bitmap 1 and show border bitmap 2:

m18write --blink1 --border2 image1.png image2.png

Show help:

m18write -h

Install

pip install m1-8-writer

Licence

MIT

Author

amane-katagiri

Related References

• http://www.daveakerman.com/?p=1440