mailreceiver 0.0.3

A web connected mail receiver

mailreceiver_webthing

A web connected mail receiver

This project implements a mail server providing a webthing API.

The mailreceiver_webthing package exposes an HTTP WebThing endpoint storing the (newest) received mail.

# webthing has been started on host 192.168.0.24
curl http://192.168.0.24:8080/properties
{
"mail": "Received: from 192.168.0.24:56520 by mail-receiver id a864d20d-4025-40e9-8ba7-e80bcd2b3814\n for [e-mail], [e-mail]; Tue, 17 Aug 2021 06:38:52 +0000\nContent-Type: text/plain; charset=\"us-ascii\"\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nSubject: Hello\nFrom: [e-mail]\nTo: [e-mail], [e-mail]\n\nHi, how are you today?"
}

To consume incoming mails as a HTTP-based stream, open a websocket connection to the WebThing.

import websocket

ws = websocket.WebSocketApp("ws://192.168.0.24:8080/", on_message=lambda ws, message: print(message))
ws.run_forever()

This example above prints the incoming messages such as shown below

{"messageType": "propertyStatus", "data": {"mail": "Received: from 172.17.0.1:56760 by mail-receiver id f67213dd-83e2-46bf-8eab-ce91d626f5ba\n for [e-mail]; Tue, 17 Aug 2021 07:31:57 +0000\nContent-Type: text/plain; charset=\"us-ascii\"\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nSubject: Hello\nFrom: [e-mail]\nTo: [e-mail]\n\nHi, how are you today?"}}
{"messageType": "propertyStatus", "data": {"mail": "Received: from 172.17.0.1:56766 by mail-receiver id 264ab273-6a71-4394-a3ea-86ef395ebc71\n for [e-mail]; Tue, 17 Aug 2021 07:42:23 +0000\nContent-Type: text/plain; charset=\"us-ascii\"\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nSubject: Re: Hello\nFrom: [e-mail]\nTo: [e-mail]\n\nNot too bad!"}}

To run this software you may use Docker or PIP package manager such as shown below

Docker approach

sudo docker run -p 8080:8080 -p 25:25 -t grro/mailreceiver:0.0.3

PIP approach

sudo pip install mailreceiver_webthing

After this installation you may start the webthing http endpoint inside your python code or via command line using

sudo mailreceiver --command listen --port 8080 --mailserver_port 25

Here, the webthing API will be bind to on port 8080. Furthermore, the mail server will be bein to port 25 THe WebThing server provides mDNS to enable clients discovering the WebThing interfaces.

By running a systemd-based Linux distribution you may use the register command to register and start the webthing service as systemd unit. By doing this the webthing service will be started automatically on boot. Starting the server manually using the listen command is no longer necessary.

sudo mailreceiver --command register --port 8080 --mailserver_port 25

To start the mailreceiver use the listen command

sudo mailreceiver --command listen --port 8080 --mailserver_port 25