mbed-flasher 0.8.0

mbed-flasher

# mbed-flasher

## Description

mbed-flasher is a simple Python-based tool for flashing single or multiple boards.
It provides a simple Command Line Interface and Python API for flashing.

The purpose is to provide a clean and simple library that is easy to integrate to other tools.
It can be easily developed further to support flashing in mbed OS and other platforms.
Developers can also use it as a standalone tool for flashing their development boards.


## Installation

To install the flasher, use:

`python setup.py install`

To install the flasher in development mode:

`python setup.py develop`

To use JLink flashing, additional package needs to be installed from [here](https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack).
JLinkExe must be found from PATH for flasher to be able to use it.

## Usage

This tool has been tested and verified to work with Windows 7 and Ubuntu (14.04 LTS) Linux.

Devices used in verification: NXP K64F, Nucleo F401RE, BBC micro:bit.

See the actual usage documentation [here](doc/usage.md).

## Help

**Main help**

```
/> mbedflash --help
usage: mbedflash [-h] [-v] [-s] <command> ...

For specific command help, run: mbedflash <command> --help

optional arguments:
-h, --help show this help message and exit
-v, --verbose Verbose level... repeat up to three times.
-s, --silent Silent - only errors will be printed.

command:
<command> command help
list Prints a list of supported platforms.
flashers Prints a list of supported flashers.
version Display version information
flash Flash given resource
reset Reset given resource
erase Erase given resource

```

**Flash help**

```
/>mbedflash flash --help
usage: mbedflash flash [-h] [-i INPUT] [--tid TARGET_ID] [-t PLATFORM_NAME]
[--no-reset]
[method]

positional arguments:
method <simple|pyocd|edbg>, used for flashing

optional arguments:
-h, --help show this help message and exit
-i INPUT, --input INPUT
Binary input to be flashed.
--tid TARGET_ID, --target_id TARGET_ID
Target to be flashed, ALL will flash all connected
devices with given platform-name, also multiple
targets can be given. Does not continue flashing
next device in case of failures. Short target_id
matches boards by prefix
-t PLATFORM_NAME, --platform_name PLATFORM_NAME
Platform of the target device(s)
--no-reset Do not reset device before or after flashing

```

**Erase help**

```
c:\>mbedflash erase --help
usage: mbedflash erase [-h] [--tid TARGET_ID] [method]

positional arguments:
method <simple|pyocd|edbg>, used for erase

optional arguments:
-h, --help show this help message and exit
--tid TARGET_ID, --target_id TARGET_ID
Target to be erased or ALL, also multiple targets can
be given. Short target_id matches boards by prefix

```

**Reset help**

```
c:\>mbedflash reset --help
usage: mbedflash reset [-h] [--tid TARGET_ID] [method]

positional arguments:
method <simple|pyocd|edbg>, used for reset

optional arguments:
-h, --help show this help message and exit
--tid TARGET_ID, --target_id TARGET_ID
Target to be reset or ALL, also multiple targets can
be given. Short target_id matches boards by prefix

```

## Running unit tests

Required pre-installed packages: coverage, mock

```
sudo pip install coverage mock
```

Execute all tests:
```
coverage run -m unittest discover -s test
```
Execute hardware tests:
```
coverage run -m unittest discover -s test.hardware
```
Execute non-hardware tests:
```
coverage run -m unittest discover -s test.non_hardware
```



Generate a coverage report:

```
coverage html
```

## Creating the installer

**For Windows:**
```
python setup.py build
python setup.py bdist_msi
```

**For Linux:**
```
python setup.py build
//for rpm package
python setup.py bdist_rpm
```
Read [more on installers](https://docs.python.org/2/distutils/builtdist.html).