mficlient 0.1

A remote control client for Ubiquiti's mFi system

Client for Ubiquiti's mFi system
================================

The APIs in this library (and tool) should not be considered stable!

To install:

$ pip install mficlient

To get started, set your connection information like this::

$ export MFI="http://user:password@192.168.1.123:6443"

Then you can run the client, doing something like:

$ mfi dump_sensors
Model | Label | Tag | Value | Extra
-------------------------------------------------------------------------------
Output 12v | Relay Control | output | 0 | 0.0
Output 24v | Relay | output | 0 | 0.0
Ubiquiti mFi-THS | Temp | temperature | 14.3 | None
Input Digital | Garage Door | input | 1 | None
Outlet | Heater Control | active_pwr | 5.810242 | 1.0
Ubiquiti mFi-CS | Furnace | amps | 1.0539 | None
Ubiquiti mFi-CS | Water Heater | amps | 0.0 | None

$ mfi control_device --device 'Heater Control' --state on