A simple wrapper around pip to support Pipenv and Poetry files
A lightweight wrapper for pip to support Pipenv and Poetry lock files or converting them to pip-tools compatible output.
micropipenv use cases
- I would like to convert files produced by Pipenv/Poetry to a pip-tools compatible output.
- I don’t want to install Pipenv/Poetry, but I would like to run a project that uses Pipenv/Poetry for dependency management (e.g. restricted environments).
- My Pipenv installation is broken and Pipenv upstream did not issue any new Pipenv release - see also Thoth’s Pipenv release for possible fix.
- I would like to deploy my application into a production environment and my application dependencies are managed by Pipenv/Poetry (dependencies are already resolved), but I don’t want to run Pipenv/Poetry in production (e.g. OpenShift’s s2i build process).
The tool supports installing dependencies of the following formats:
- Pipenv style lock format - files Pipfile and Pipfile.lock
- Poetry style lock format - files pyproject.toml and poetry.lock
- pip-tools style lock format - file requirements.txt
- raw requirements.txt as used by pip (not a lock file)
In case of Pipenv, Poetry and pip-tools style format, the tool performs automatic recovery if the installation order of dependencies is relevant (one dependency fails to install as it depends on an another one).
To enforce the installation method used, specify --method option to the install subcommand. By default, micropipenv traverses the filesystem up from the current working directory and looks for the relevant files in the following order:
- Pipfile.lock and optionally Pipfile (if --deploy set)
- poetry.lock and pyproject.toml
- requirements.txt for pip-tools and raw pip requirements
To install dependencies issue the following command:
micropipenv install --dev # --dev is optional
You can supply additional positional arguments that will be passed to pip. Use double dashes to distinguish pip options from micropipenv options.
# issue `pip install --user' micropipenv install -- --user
micropipenv does not create any virtual environment as in case of Pipenv/Poetry. It rather directly talks to pip, if necessary, and constructs arguments out of the lock file used.
To create a virtual environment to be used by micropipenv:
python3 -m venv venv/ && . venv/bin/activate
micropipenv install --deploy
If you wish to mimic pipenv --deploy functionality, you can do so:
micropipenv install --deploy
Note however, there is a need to parse Pipfile and verify its content corresponds to Pipefile.lock used (digest computed on Pipfile content). micropipenv requires toml extras for this functionality, so you will need to install micropipenv[toml] (see installation instructions bellow).
The --deploy option takes no effect for Poetry and requirements installation methods.
micropipenv install --dev
Installation of “development” dependnecies can be acomplished using the --dev flag. This flag has no effect when requirements.txt file is used.
micropipenv requirements / micropipenv req
To generate output compatible with pip-tools, you can issue the following command:
This applies to conversion from Poetry and Pipenv specific lock files.
Additional configuration options can limit what is present in the output (e.g. --no-dev to remove development dependencies).
A special option --only-direct makes micropipenv work on Pipfile instead of Pipfile.lock. This requires toml extras, so install micropipenv[toml] for this functionality (see installation instructions bellow). To get direct dependencies of an application and store them in requirements.txt file:
micropipenv requirements --only-direct > requirements.txt
For a setup that follows pip-tools convention with requirements.in and requirements.txt
micropipenv requirements --no-dev > requirements.txt micropipenv requirements --no-dev --only-direct > requirements.in micropipenv requirements --no-default > dev-requirements.txt micropipenv requirements --no-default --only-direct > dev-requirements.in
See micropipenv requirements --help for more info.
micropipenv as a library
micropipenv exposes some core functionality on top of Pipfile/Pipfile.lock. You can import its functions and use micropipenv as a lightweight library for Pipfile/Pipfile.lock and pyproject.toml/poetry.lock manipulation.
Adjusting options using environment variables
All options can be triggered using environment variables - the name of an environment variable is always prefixed with MICROPIPENV_ and consists of the name of the option converted to uppercase, dashes are replaced with underscores (example --no-dev is mapped to MICROPIPENV_NO_DEV). All environment variables corresponding to flags are parsed as integers and subsequently casted to a boolean. For example, to turn --no-dev flag on, set MICROPIPENV_NO_DEV=1 (0 disables the flag). Parameters supplied to CLI take precedence over environment variables.
A special environment variable MICROPIPENV_PIP_BIN can point to an alternate pip binary.
To run this tool in a verbose mode, you can set the MICROPIPENV_DEBUG=1 (the same behavior can be achieved with multiple --verbose supplied).
The tool prints software stack information to the standard error output. This was designed for Thoth to capture information about installed dependencies as a useful source of information for Thoth’s build analyzers. This behaviour can be suppressed by setting MICROPIPENV_NO_LOCKFILE_PRINT=1 environment variable.
Besides printing, the tool also writes the content of Pipfile.lock (if a locked software stack is used) to the directory where lock files are present (for Pipenv files, the Pipfile.lock is kept untouched). This behaviour can be suppressed by providing MICROPIPENV_NO_LOCKFILE_WRITE=1 environment variable.
Install dependencies managed by Poetry as pip install --user would do (option --method is optional, auto-discovery is performed if omitted):
$ ls poetry.lock pyproject.toml project.py $ micropipenv install --method poetry -- --user
Install dependencies (both main and develop) managed by Poetry into a virtual environment:
$ ls poetry.lock pyproject.toml project.py $ python3 -m venv venv/ $ . venv/bin/activate (venv) $ micropipenv install --dev
Install dependencies managed by Pipenv (both main and develop) into a virtual environment (option --method is optional, auto-discovery is performed if omitted):
$ ls Pipfile Pipfile.lock src/ $ python3 -m venv venv/ $ . venv/bin/activate (venv) $ micropipenv install --dev
Perform deployment of an application as Pipenv would do with Python interpreter version check and Pipfile file hash check (you can create virtual environment only if necessary):
$ ls Pipfile Pipfile.lock src/ $ python3 -m venv venv/ $ . venv/bin/activate (venv) $ micropipenv --deploy
Generate pip-tools compliant requirements.in, dev-requirements.in, requirements.txt and dev-requirements.txt out of Pipfile and Pipfile.lock - project dependencies managed by Pipenv:
$ ls Pipfile Pipfile.lock src/ $ micropipenv requirements --no-dev > requirements.txt $ micropipenv requirements --no-dev --only-direct > requirements.in $ micropipenv requirements --no-default > dev-requirements.txt $ micropipenv requirements --no-default --only-direct > dev-requirements.in
Generate pip-tools complaint requirements.in, dev-requirements.in, requirements.txt and dev-requirements.txt out of pyproject.toml and poetry.lock - project dependencies managed by Poetry:
$ ls poetry.lock pyproject.toml src/ $ micropipenv requirements --no-dev > requirements.txt $ micropipenv requirements --no-dev --only-direct > requirements.in $ micropipenv requirements --no-default > dev-requirements.txt $ micropipenv requirements --no-default --only-direct > dev-requirements.in
The project is hosted on PyPI so installing it using pip works as expected:
pip install micropipenv
The default installation does not bring any dependencies so its just micropipenv that gets installed. However, the default installation supports only Pipfile.lock management. If you would like to manipulate also with Pipfile or Poetry specific lock files, you will need to install micropipenv with TOML support (TOML is not in the standard Python library):
pip install micropipenv[toml]
Once the project gets installed, you can browse the help message by invoking the micropipenv CLI:
You can run micropipenv without actually installing it - simply download the file and execute it. If you do not wish to save micropipenv.py file to disk, you can issue:
curl https://raw.githubusercontent.com/thoth-station/micropipenv/master/micropipenv.py | python3 - --help
Anything after python3 - will be passed as an argument to micropipenv.py so installing packages can be simply performed using:
curl https://raw.githubusercontent.com/thoth-station/micropipenv/master/micropipenv.py | python3 - install -- --user
All arguments after – will be passed to pip as options.
Release history Release notifications | RSS feed
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
|Filename, size||File type||Python version||Upload date||Hashes|
|Filename, size micropipenv-0.1.2.tar.gz (14.6 kB)||File type Source||Python version None||Upload date||Hashes View|