midea-beautiful-dehumidifier 0.5.2

A library to control Midea dehumidifiers via the Local area network

This is a library that allows communication with Midea dehumidifier appliances via the local area network.

midea-beautiful-dehumidifier

This library allows discovering Midea dehumidifiers on local network, getting their state and controlling then. The name comes from Chinese name for Midea (美的) which translates to beautiful in English.

This library inspired from the repository at mac-zhou/midea-msmart which provides similar functionality for air conditioners and barban-dev/midea_inventor_dehumidifier cloud based functionality for dehumidifiers. This library may include verbatim or adapted portions of the code from those two projects.

Thanks also to yitsushi's project, NeoAcheron's project, andersonshatch's project.

Supported appliances

The library works only Midea dehumidifiers supporting V3 protocol. Both appliances with and without ion function are supported.

Some examples of supported dehumidifiers:

• Comfee MDDF-16DEN7-WF or MDDF-20DEN7-WF (tested with 20L version)
• Inventor EVA ΙΟΝ Pro Wi-Fi (EP3-WiFi 16L/20L) (tested with 20L version)
• Inventor Eva II Pro Wi-Fi (EVP-WF16L/20L)
• Pro Breeze 30L Smart Dehumidifier with Wifi / App Control

It may as well work with other Midea Wi-Fi dehumidifiers.

Dehumidifier data

The following dehumidifier data is accessible via library:

• on/off switch (boolean, can be set)
• current relative humidity (read-only)
• target relative humidity (can be set)
• active mode (can be set)
• fan speed (can be set)
• ion mode status (boolean, can be set)
• tank is full (boolean, read-only)
• appliance name (read-only). Set through Midea mobile application.
• appliance serial number (read-only)
• appliance IPv4 address (read-only)
• token and key for local network access (read-only, only v3 appliances)
• filter replacement indicator (boolean, read-only, if supported on appliance)
• pump on/off switch (boolean, can be set, if supported on appliance)
• defrosting mode indicator (boolean, read-only, if supported on appliance)
• internal error code (read-only)

Discovery

This library is able to discover appliances on local network. This is done by broadcasting UDP packets on all local networks interfaces to ports 6445. Appliances will respond to this broadcast with their description packet. Following discovery, communication switchers to TCP over port 6444. This communication is encrypted, and, for appliances with version 3 firmware the library needs a token/key combination associated to each appliance. This can be either provided as arguments or retrieved from Midea app account. Once obtained, the token/key pair can be reused for an appliance multiple times. The library can also retrieve the list of registered appliances from Midea app account and obtain additional information for devices (eg. name).

Library connects to Midea cloud API using credentials from NetHome Plus mobile app. You can use other Midea app mobile applications if you obtain their application key and id. See midea_beautiful_dehumidifier/midea.py for some examples. Application key and application id must match, otherwise library won't be able to sign in.

The discovery should work on Linux and Windows based systems, however it doesn't work in Windows Subsystem for Linux and may not work in Docker containers or VMs depending on network setup. For example, VM or container needs to have rights to broadcast to physical network to make discovery work. On workaround is to run discovery from non-virtualized environment host.

If this discovery mechanism doesn't work on particular set-up, it is still possible to either target appliances directly using their IP address when it is known or to retrieve or setting their status using cloud service.

Network considerations

Discovery requires that both appliance and the machine performing discovery are present on the same subnet. Discovery process will issue UDP broadcast request on the local private networks discovered from host's network adapters. The library only scans private network ranges using this method (e.g. 10.0.0.0 – 10.255.255.255, 172.16.0.0 – 172.31.255.255 and 192.168.0.0 – 192.168.255.255) It is also possible to explicitly provide networks or even single addresses to scan and in this case there is no limitation on address ranges, however, beware of sending broadcast requests to public ip networks.

Local protocol support

Library supports following protocols:

• cloud based status reading and writing (no local access needed)
• v3 local protocol with compatible devices (requires TOKEN/KEY combination)
• v2 local protocol with compatible devices (TO BE TESTED)

Logging

Library logs additional information at log level 5. Credentials information like username, password or token keys should never be logged, but you can use command line tool to display token and key data.

Command Line Usage

Installing package

pip install --upgrade midea-beautiful-dehumidifier

Command line tool help

midea_beautiful_dehumidifier-cli --help
midea_beautiful_dehumidifier-cli discover --help
midea_beautiful_dehumidifier-cli set --help
midea_beautiful_dehumidifier-cli status --help

Discovery

Discover dehumidifier appliances on the local network:

midea_beautiful_dehumidifier-cli discover --account ACCOUNT_EMAIL --password PASSWORD

Show tokens used to connect to appliances via local network

midea_beautiful_dehumidifier-cli discover --account ACCOUNT_EMAIL --password PASSWORD --credentials

Search for devices by providing explicit network address

midea_beautiful_dehumidifier-cli discover --account ACCOUNT_EMAIL --password PASSWORD --network 192.0.1.3 --credentials

Search for devices by providing explicit network range

midea_beautiful_dehumidifier-cli discover --account ACCOUNT_EMAIL --password PASSWORD --network 192.0.1.2/24 --credentials

Appliance status

Get status of an appliance using known TOKEN and KEY (e.g. retrieved using discover command)

midea_beautiful_dehumidifier-cli status --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY

Get status of an appliance using Midea app credentials

midea_beautiful_dehumidifier-cli status --ip APPLIANCE_IP_ADDRESS --account ACCOUNT_EMAIL --password PASSWORD

Get status of an appliance via Midea cloud API (note the usage of --id and --cloud options)

midea_beautiful_dehumidifier-cli status --id APPLIANCE_ID --account ACCOUNT_EMAIL --password PASSWORD --cloud

Set appliance attribute

Set target relative humidity (0-100)

midea_beautiful_dehumidifier-cli set --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --humidity 55

Sets operating mode (number 1 to 4)

midea_beautiful_dehumidifier-cli set --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --mode 1

Set fan strength (0-100)

midea_beautiful_dehumidifier-cli set --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --fan 40

Turn on/off ion mode (0 or 1)

midea_beautiful_dehumidifier-cli set --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --ion 1

Turn on/off ion mode (0 or 1)

midea_beautiful_dehumidifier-cli set --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --on 1

Turn on/off pump (0 or 1)

midea_beautiful_dehumidifier-cli set --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --pump 1

Combinations multiple settings

midea_beautiful_dehumidifier-cli set --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --fan 60 --humidity 50

Set target humidity via Midea cloud API (note the usage of --id and --cloud options)

midea_beautiful_dehumidifier-cli set --id APPLIANCE_ID --account ACCOUNT_EMAIL --password PASSWORD --humidity 55 --cloud

Watch appliance status

Watch appliance status allows to debug packets received when polling it. It will repeatedly retrieve appliance status with specified pauses between each poll. Polling can be interrupted via keyboard.

Continuously watch status of an appliance using known TOKEN and KEY (e.g. retrieved using discover command) with interval of 10 seconds between polling

midea_beautiful_dehumidifier-cli watch --ip APPLIANCE_IP_ADDRESS --token TOKEN --key KEY --interval 10

Continuously watch status of an appliance using Midea app credentials with interval of 30 seconds between polling

midea_beautiful_dehumidifier-cli status --ip APPLIANCE_IP_ADDRESS --account ACCOUNT_EMAIL --password PASSWORD --interval 30

Specifying log level

Log level is specified using --log option:

Set DEBUG level

midea_beautiful_dehumidifier-cli --log DEBUG discover --account ACCOUNT_EMAIL --password PASSWORD

Very verbose level (may contain confidential information)

midea_beautiful_dehumidifier-cli --log NOTSET discover --account ACCOUNT_EMAIL --password PASSWORD

Set WARNING level (default log level if option was not specified)

midea_beautiful_dehumidifier-cli --log WARNING discover --account ACCOUNT_EMAIL --password PASSWORD

Code examples

Discover appliances on local network:

from midea_beautiful_dehumidifier import find_appliances

appliances = find_appliances(
    account="[e-mail]",  # Account e-mail
    password="secret_password",  # Account password
)
for appliance in appliances:
    print(f"{appliance!r}")

Get appliance state:

from midea_beautiful_dehumidifier import appliance_state

appliance = appliance_state(
    ip=192.0.1.2,  # APPLIANCE_IP_ADDRESS 
    token="TOKEN",  # TOKEN obtained from Midea API
    key="KEY",  # Token KEY obtained from Midea API
)
print(f"{appliance!r}")

Get appliance state from cloud:

from midea_beautiful_dehumidifier import appliance_state

appliance = appliance_state( 
    account="[e-mail]",  # Account e-mail
    password="secret_password",  # Account password
    id=123412341234,  # Appliance id obtained from Midea API 
)
print(f"{appliance!r}")

Build the library

Library is automatically built, packaged and published to PyPI when a Git Hub release is published.

See also

• https://github.com/nbogojevic/homeassistant-midea-dehumidifier-lan