mitransient 1.0.2

Transient rendering extensions for Mitsuba 3

Transient Mitsuba 3

Miguel Crespo      Diego Royo      Jorge García

Overview

This library adds support to Mitsuba 3 for doing transient simulations, with amazing support for non-line-of-sight (NLOS) data capture simulations.

Main features

• Cross-platform: Mitsuba 3 has been tested on Linux (x86_64), macOS (aarch64, x86_64), and Windows (x86_64).
• Easy interface to convert your algorithms for the transient domain.
• Temporal domain filtering.
• Python-only library for doing transient rendering in both CPU and GPU.
• Several integrators have already been implemented including path tracing (also adapted for NLOS scenes) and volumetric path-tracing.

ℹ️ Check out our examples about how to use our library!
Featuring General Usage, Line-of-sight transient rendering, and Non-line-of-sight transient rendering

License and citation

This project was created by Miguel Crespo and expanded by Diego Royo and Jorge García.

If you use our code in your project, please consider citing us using the following:

@misc{mitsuba3transient,
	title        = {Transient Mitsuba 3},
	author       = {Royo, Diego and Crespo, Miguel and Garcia, Jorge},
	year         = 2023,
	journal      = {GitHub repository},
	publisher    = {GitHub},
	howpublished = {\url{https://github.com/diegoroyo/mitsuba3-transient-nlos}}
}

Additionally, the NLOS features were re-implemented from our publication Non-line-of-sight transient rendering. Please also consider citing us if you use them:

@article{royo2022non,
	title        = {Non-line-of-sight transient rendering},
	author       = {Diego Royo and Jorge García and Adolfo Muñoz and Adrian Jarabo},
	year         = 2022,
	journal      = {Computers & Graphics},
	doi          = {https://doi.org/10.1016/j.cag.2022.07.003},
	issn         = {0097-8493},
	url          = {https://www.sciencedirect.com/science/article/pii/S0097849322001200}
}

What is transient rendering?

Conventional rendering is referred to as steady state, where the light propagation speed is assumed to be infinite. In contrast, transient rendering breaks this assumption allowing us to simulate light in motion (see the teaser image for a visual example).

For example, path tracing algorithms integrate over multiple paths that connect a light source with the camera. For a known path, transient path tracing uses the very complex formula of time = distance / speed (see [Two New Sciences by Galileo]) to compute the time when each photon arrives at the camera from the path's distance and light's speed. This adds a new time dimension to the captured images (i.e. it's a video now). The simulations now take new parameters as input: when to start recording the video, how long is each time step (framerate), and how many frames to record.

Note: note that the time values we need to compute are very small (e.g. light takes only ~3.33 * 10^-9 seconds to travel 1 meter), time is usually measured in optical path distance. See Wikipedia for more information. TL;DR opl = distance * refractive_index

Roadmap

*Last update: Apr. 2024

• Importance sampling of the temporal domain
• Differentiable transient rendering
• Fluorescence BRDF
• Non-line-of-sight support (NLOS)
  • max_depth
  • filter_depth
  • discard_direct_paths
  • auto_detect_bins
  • Faster implementation of exhaustive scanning

Installation

We provide the package via PyPI. To install mitsuba3-transient-nlos you need to run:

pip install mitransient

If you have installed Mitsuba 3 via pip you will only have access to the llvm_ad_rgb and cuda_ad_rgb variants. If you want to use other variants (e.g. NLOS simulations can greatly benefit from the llvm_mono variant which only propagates one wavelength), then we recommend that you compile Mitsuba 3 yourself following this tutorial and enable the following variants: ["scalar_mono", "llvm_mono", "llvm_ad_mono", "cuda_mono", "cuda_ad_mono", "scalar_rgb", "llvm_rgb", "llvm_ad_rgb", "cuda_rgb", "cuda_ad_rgb"].

Requirements

• Python >= 3.8
• Mitsuba3 >= 3.5.0
• (optional) For computation on the GPU: Nvidia driver >= 495.89
• (optional) For vectorized / parallel computation on the CPU: LLVM >= 11.1

Old installation instructions (incl. Mitsuba 3 fork)

See details

_NOTE: These instructions have been tested on Linux and Windows 11 (Powershell), but can be adapted to MacOS probably (hopefully) without many problems_

After cloning the repo, navigate to the root folder and execute the following commands to build the custom version of Mitsuba 3

• Step 0: Clone the repo (including the mitsuba3 custom fork submodule)

git clone [e-mail]:diegoroyo/mitsuba3-transient-nlos.git mitsuba3-transient-nlos
cd mitsuba3-transient-nlos
git submodule update --init --recursive

Now the steps are different for Linux and Windows users

Linux users:

• Step 1: Compile mitsuba3 (ext/mitsuba3) from source

  • This is for Linux. for other OSes, check: https://mitsuba.readthedocs.io/en/latest/src/developer_guide/compiling.html

    cd ext/mitsuba3
    mkdir -p build && cd build
    

  • You might want to set the C++/C compiler (probably you want this e.g. if cmake complains about your version of g++). Always set C_COMPILER version to the same version as CXX_COMPILER (e.g. if you use g++-12, then also set gcc-12)

  • If you have multiple Python versions installed, also set Python_EXECUTABLE to ensure that the program is compiled for your specific version of Python

    cmake \
        -GNinja \
        -DCMAKE_CXX_COMPILER=<path-to-c++-compiler> \
        -DCMAKE_C_COMPILER=<path-to-c-compiler> \
        -DPython_EXECUTABLE=<path-to-python-executable> \
        ..
    

  • Step 1.1: You should see a message that a file was created on "build/mitsuba.conf". Open the file and look for "enabled" variants. Docs: https://mitsuba.readthedocs.io/en/latest/src/key_topics/variants.html

    • Recommended variants: "scalar_mono", "llvm_mono", "llvm_ad_mono", "cuda_mono", "cuda_ad_mono", "scalar_rgb", "llvm_rgb", "llvm_ad_rgb", "cuda_rgb", "cuda_ad_rgb".
    • IMPORTANT: At least one ad variant needs to be specified.

  • Step 1.2: Re-run the cmake command to read the updated mitsuba.conf and compile the code with ninja

    cmake <same arguments as before> ..
    ninja  # This will take some time
    

• Step 2: Install mitsuba3-transient-nlos (a.k.a. mitransient Python library)

  cd ../../..  # go back to initial mitsuba3-transient-nlos folder
  scripts/local_install.sh
  

Windows users:

• Step 1: Compile mitsuba3 (ext/mitsuba3) from source

  cd ext/mitsuba3
  

  • A recent version of Visual Studio 2022 is required. Cmake need to be installed manually

  • Check that the version of your Python is the correct one when you execute python

    # Specifically ask for the 64 bit version of Visual Studio to be safe
    cmake -G "Visual Studio 17 2022" -A x64 -B build
    

  • Step 1.1: You should see a message that a file was created on "build/mitsuba.conf". Open the file and look for "enabled" variants. Docs: https://mitsuba.readthedocs.io/en/latest/src/key_topics/variants.html

    • Recommended variants: "scalar_mono", "llvm_mono", "llvm_ad_mono", "cuda_mono", "cuda_ad_mono", "scalar_rgb", "llvm_rgb", "llvm_ad_rgb", "cuda_rgb", "cuda_ad_rgb".
    • IMPORTANT: At least one ad variant needs to be specified.

  • Step 1.2: Re-run the cmake command to read the updated mitsuba.conf and compile the code with Visual Studio.

    cmake <same arguments as before>
    # You can build from terminal with this, if you don't like opening Visual Studio
    cmake --build build --config Release  # this will take some time
    

• Step 2: Install mitsuba3-transient-nlos (a.k.a. mitransient Python library)

  • Step 2.1: You will need to edit your environment variables in Windows manually

    MITSUBA_DIR = <path-to-the-cloned-repository</mitsuba3-transient-nlos/ext/mitsuba3/build/Release
    Path = %Path%;%MITSUBA_DIR%
    PYTHON_PATH = %MITSUBA_DIR%/python
    

  • Step 2.2: Install mitsuba3-transient-nlos (a.k.a. mitransient Python library)

    cd ../../  # go back to initial mitsuba3-transient-nlos folder
    python -m pip install .
    

After installation

At this point, you should be able to import mitsuba and import mitransient in your Python code (careful about setting the correct PATH environment variable if you have compiled Mitsuba 3 yourself, see the section below).

For NLOS data capture simulations, see https://github.com/diegoroyo/tal. tal is a toolkit that allows you to create and simulate NLOS scenes with an easier shell interface instead of directly from Python.

If you use your own Mitsuba 3

If you have opted for using a custom (non-default installation through pip) Mitsuba 3, you have several options for it. The idea here is to be able to control which version of Mitsuba will be loaded on demand.

• One solution is to directly execute setpath.sh provided after the compilation of the Mitsuba 3 repo (More info). This shell script will modify the PATH and PYTHONPATH variables to load first this version of Mitsuba.
• Another solution following the previous one is to directly set yourself the PYTHONPATH environment variable as you wish.
• Another solution for having a custom version globally available is by using pip install . --editable. This will create a symlink copy of the package files inside the corresponding site-packages folder and will be listed as a package installed of pip and will be available as other packages installed. If you recompile them, you will still have the newest version directly to use. Please follow these instructions:
  • Go to <mitsuba-path>/mitsuba3/build/python/drjit and execute pip install . --editable.
  • Go to <mitsuba-path>/mitsuba3/build/python/mitsuba and execute pip install . --editable.
• If you are a user of Jupyter Notebooks, the easiest solution will be to add the following snippet of code to modify the notebook's PYTHONPATH:

import sys
sys.path.insert(0, '<mitsuba-path>/mitsuba3/build/python')
import mitsuba as mi

Usage

ℹ️ Check out the examples folder for practical usage!

As of November 2023, mitsuba3-transient-nlos implements the following plugins which can be used in scene XML files. To view a description of their parameters, click on the name of your desired plugin.

• film:
  • transient_hdr_film: Transient equivalent of Mitsuba 3's hdrfilm plugin.
• integrators:
  • transient_path: Transient path tracing for line-of-sight scenes. If you want to do NLOS simulations, use transientnlospath instead.
  • transient_nlos_path: Transient path tracing with specific sampling routines for NLOS scenes (e.g. laser sampling and hidden geometry sampling of the "Non-Line-of-Sight Transient Rendering" paper).
  • transient_prbvolpath: Path Replay Backpropagation for volumetric path tracing. Implemented by Miguel Crespo, untested.
• sensor:
  • nlos_capture_meter: Can be attached to one of the scene's geometries, and measures uniformly-spaced points on such geometry (e.g. relay wall).

Testing

Our test suite can be run using pytest on the root folder of the repo.