A package to read/write registers on a temperature sensor with python.
Project description
temperature_sensor_reader
This is a temperature sensor package designed for modbus. Implemented in pymodbus only. PyPI website: https://pypi.org/project/modbus-configuretools-xzf8971/
Install
from pypi:
pip install modbus-configuretools-xzf8971
from github:
pip install git+https://github.com/xzf89718/temperature_sensor_reader
Jiandarenke modbus RS485 as example
Before run scripts
Check the COM and chmod
chmod 666 \dev\ttyUSBx
Import modules
from modbus_configuretools import temperature_sensor.RS485_Jiandarenke as RS485_JDRK
from modbus_configuretools import temperature_sensor.JDRKAddressConfig as Config
Configure parameters for Jiandarenke RS485 sensor
It's OK to set None for unkown value
# Modify these config values
# Please configure these value in temperature_sensor before read or write values
# SLAVEID must be specified. If SLAVEID is none, set to 1
# ADDRESS_HUMIDITY = 0x0000
# ADDRESS_TEMPERATURE_DEW_POINT = 0x0001
# ADDRESS_TEMPERATURE = 0x0002
# ADDRESS_TEMPERATURE_CALI = 0x0050
# ADDRESS_HUMUDITY_CALI = 0x0051
# ADDRESS_SLAVEID = 0x07D0
# ADDRESS_BAUDRATE = 0x07D1
# TEMPERATURE_CALI = 164
# HUMIDITY_CALI = 7
# SLAVEID = 1
# BAUDRATE = 1
myconfig = Config(ADDRESS_HUMIDITY, ADDRESS_TEMPERATURE_DEW_POINT, ADDRESS_TEMPERATURE, ADDRESS_SLAVEID, ADDRESS_BAUDRATE, ADDRESS_TEMPERATURE_CALI, ADDRESS_HUMUDITY_CALI, TEMPERATURE_CALI, HUMIDITY_CALI, SLAVEID, BAUDRATE)
Calibration of sensor. Not necessary calibration every time
sensor.CalibrationJiandarenke(myconfig)
Set slaveID and baudrate
Please make sure only 1 sensor connect to the modbus bus
sensor.WriteSlaveIDAndBaudrate(myconfig)
Init and read measured values from sensor
# Create a wrapper for JDRK sensor
sensor = RS485_JDRK(port="/dev/ttyUSB0")
# Init and connect client
sensor.InitClient()
# Read slaveID and baudrate
slaveID, baudrate = sensor.ReadSalveIDAndBaudrate(myconfig)
# Read temperature, dew point, humidity in one request
# Only correct for specified sensor
temperature, dew_point_temperature, humidity = sensor.ReadTemperatureAndHumidity(myconfig)
# Read temperature only
temperature = sensor.ReadTemperature(myconfig)
# Read dew point temperature
dew_point_temperature = sensor.ReadTemperatureDewPoint(myconfig)
# Read humidity only
humidity = sensor.ReadTemperature(myconfig)
Close the sensor
sensor.close()
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
Close
Hashes for modbus_configuretools_xzf8971-1.1.2.tar.gz
Algorithm | Hash digest | |
---|---|---|
SHA256 | 0571999630d1a8f71d2e309ccf07522d815a8f10a727293961349b10a51eff30 |
|
MD5 | bac07f4980325eedbc6d30bc2ecf60b7 |
|
BLAKE2b-256 | 92dbb6052f0437443b465324452b15ed1692b1b43fd038f09822d298f8a37875 |
Close
Hashes for modbus_configuretools_xzf8971-1.1.2-py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | 8be10a2174a7607bfac3c61ef9be95cc4db83288a97b653de42d381bb1289022 |
|
MD5 | 8150835f4a97577f85e82e913a67c08c |
|
BLAKE2b-256 | 1dc9f09e8824776a0285838471031cd0f8085e8e516f1ab084aefec384abe820 |