model-railway-signals 3.4.0

Create your own DCC model railway signalling scheme

model-railway-signalling

A DCC model railway signalling system written in Python. Primarily intended for the Raspberry Pi, but will also run on other platforms (albeit without some of the Raspberry-Pi specific interfacing functions).

• Enables schematics to be created with signals, points, track occupancy sections and block instruments
• Most types of colour light signals, semaphore signals, and ground signals are supported.
• Interfaces with the Pi-SPROG DCC command station to drive the signals and points out on the layout
• Uses the Raspberry Pi GPIO inputs to provide train detection in support of signalling automation
• Incorporates MQTT networking to allow multiple signalling applications to be linked for larger layouts

Layout editor

The schematic editor application enables automated and interlocked layout signalling schemes to be designed and configured via the UI without the need to write any code. Note that the editor is in active development so any comments and suggestions for future features are welcome.

What's currently supported by the Editor:

• Draw your schematic with lines, points, signals, track occupancy sections and block instruments
• Define the DCC command sequences needed to drive the signals and points out on the layout
• Configure the signals, points and block instruments for protototypical interlocking
• Configure GPIO sensors and track sections to provide a 'mimic' display of the layout
• Configure a level of automation for the signals as trains traverse the layout

What's New in Release 3.4.0:

• Point and line colour selections - to enable colour coding of routes
• Line end-style selections - end-stops and arrow styles can now be specified
• Enhanced error/warning reporting via popups - reduced reliance on logs
• Layout 'info' function (under Help) allows you to add notes for your layout
• Fixed issue when selecting objects if Canvas is scrolled within the main window
• Various window geometry improvements to keep key UI elements visible on resizing
• Track section occupancy logic corrected for passing shunt-ahead ground signals

What's coming soon:

• MQTT networking (for linking layouts)
• Better pplication documentation

Any bug reports and feedback you may have would be gratefully appreciated - specifically:

• What aspects are intuitive? What aspects aren't?
• What aspects do you particularly like?
• What aspects particularly irritate you?

There are some example layout files in the 'configuration_examples' folder.

Library functions

All of the functions for creating and managing 'signals', 'points', 'sections', 'sensors' and 'block instruments' have been developed as a Python Package to promote re-use across other layouts. This includes functions to support the interlocking of signals, points and block instruments, enabling fully prototypical signalling schemes to be developed in code.

An interface to a SPROG DCC Command station enables control of the signals and points out on the layout. The signals and points can be mapped to one or more DCC addresses in a manner that should be compatible with the majority of DCC signal/points decoders currently on the market. A GPIO interface allows external train detectors to be connected in via opto-isolators. These sensors can be configured to trigger 'signal approached' or 'signal passed' events, enabling full automatic control of the layout signalling. A MQTT interface enables multiple signalling applications to be networked together so that complex layouts can be split into different signalling sections/areas, with communication between them.

Installation

For a first time installation use:

$ python3 -m pip install model-railway-signals 

To upgrade to the latest version use:

$ python3 -m pip install --upgrade model-railway-signals 

If you want to use Block Instruments with full sound enabled (bell rings and telegraph key sounds) then you will also need to install the 'simpleaudio' package. Note that for Windows it has a dependency on Microsoft Visual C++ 14.0 or greater (so you will need to ensure Visual Studio 2015 is installed first). If 'simpleaudio' is not installed then the software will still function correctly (just without sound).

$ python3 -m pip install simpleaudio

Using the layout editor

To run the editor application:

The python package should be run as a module (note underscores):

$ python3 -m model_railway_signals

or to load a layout schematic at startup

$ python3 -m model_railway_signals -f layout_file.sig

Using the library functions

To use the public API functions for developing your own layout signalling system:

from model_railway_signals import * 

For details of the API and code examples see the seperate 'PUBLIC_API.md' file.