Mopidy extension for GPIO input on a Raspberry Pi
Project description
Mopidy extension for GPIO input on a Raspberry Pi
Installation
Install by running:
pip install Mopidy-Raspberry-GPIO
Or, if available, install the Debian/Ubuntu package from apt.mopidy.com.
Configuration
Before starting Mopidy, you must add configuration for Mopidy-Raspberry-GPIO to your Mopidy configuration file:
[raspberry-gpio] enabled = true bcm5 = play_pause,active_low,150 bcm6 = volume_down,active_low,150 bcm16 = next,active_low,150 bcm20 = volume_up,active_low,150
Each bcmN entry corresponds to the BCM pin of that number.
You must assign an event, mode and bouncetime (ms) to your desired pins.
Supported events:
play_pause
volume_up
volume_down
next
prev
Supported modes:
active_low - configures the pin with a pull-up and triggers when it reads 0/low (RECOMMENDED)
active_high - configures the pin as a pull-down and triggers when it reads 1/high
Project resources
Credits
Original author: Phil Howard
Current maintainer: Phil Howard
Project details
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Hashes for Mopidy-Raspberry-GPIO-0.0.2.tar.gz
Algorithm | Hash digest | |
---|---|---|
SHA256 | c81902d56f350f407d3c695b14ec79b7618b5d6ba06709e99113194f57d65faf |
|
MD5 | 3f2070450d44c17cc3e3401b003b5601 |
|
BLAKE2b-256 | 0288d8f7d071e0d1b3c2fa661781c143fa999e6949cdf2a187d5b7a1e4b63b59 |