mxdev 4.0.2

Enable to work with Python projects containing lots of packages, of which you only want to develop some.

Mixed development source packages on top of stable constraints using pip

mxdev [mɪks dɛv] is a utility that makes it easy to work with Python projects containing lots of packages, of which you only want to develop some.

It builds on top of the idea to have stable version constraints and then develop from a VCS on top of it.

As part of the above use-case sometimes versions of the stable constraints need an override with a different (i.e. newer) version. Other software follow the same idea are mr.developer for Python's zc.buildout or mrs-developer for NPM packages.

Star us on Github

Overview

mxdev procedure is:

1. Configuration is read,
2. Requirements and constraints (given in the configuration) are read.
3. Sources from VCS are fetched into a target directory,
4. Modified constraints (handled packages commented, overridden versions replaced) and requirements (handled packages as editable from sources) are written.

mxdev will not run pip for you!

Configuration

Given a requirements.txt (or similar named) file which itself references a constraints.txt file inside.

Create an INI file, like mx.ini in configparser.ExtendedInterpolation syntax.

Main section [settings]

The main section must be called [settings], even if kept empty. In the main sections the input and output files are defined.

requirements-in

Main requirements file to start with. This can be an URL too.

If given an empty value mxdev will only generate output from the information given in INI file itself.

Default: requirements.txt

requirements-out

Output of the combined requirements including development sources to be used later with pip install. Default: requirements-mxdev.txt

constraints-out

Output of the combined constraints.

Default: constraints-mxdev.txt

include

Include one or more other INI files.

The included file is read before the main file, so the main file overrides included settings. Included files may include other files. Innermost inclusions are read first.

If an included file is an HTTP-URL, it is loaded from there.

If the included file is a relative path, it is loaded relative to the parents directory or URL.

The feature utilizes the ConfigParser feature to read multiple files at once.

Default: empty

default-target

Target directory for sources from VCS. Default: ./sources

default-install-mode

Default for install-mode on section, read there for details Allowed values: direct or skip

Default: direct

default-update

Default for update on section, read there for details

Allowed values: yes or no

Default: yes

threads

Number of threads to fetch sources in parallel with. Speeds up fetching from VCS.

Default: 4

offline

Do not fetch any sources. Handy if working offline.

Default: False

version-overrides

Override package versions which are already defined in a dependent constraints file. I.e. an upstream constraints.txt contains already somefancypackage==2.0.3. Given that, for some reason (like with my further developed sources), we need version 3.0.0 of the above package.

Then in this section, this can be defined as:

[settings]
version-overrides =
    somefancypackage==3.0.0
    otherpackage==33.12.1

It is possible to add as many overrides as needed. When writing the constraints-out, the new version will be taken into account. If there is a source section defined for the same package, the source will be used and entries here are ignored.

ignores

Ignore packages that are already defined in a dependent constraints file. No new version will be provided. This is specifically handy if a package is going to be installed editable from local file system (like -e .), but was already pinned in an upstream constraints file.

This can be defined as:

[settings]
ignores =
    somefancypackage
    otherpackage

default-use

True by default. When false, the source is not checked out, and the version for this package is not overridden. Additionally, custom variables can be defined as key = value pair. Those can be referenced in other values as ${settings:key} and will be expanded there.

main-package

mxdev can handle one Python package as main package directly via ini config. If defined, it will be added as last entry in the resulting requirements out file.

This can be defined as:

[settings]
main-package = -e .[test]

If the main package is defined in a dependent constraint file, it's name must be added to ignores.

Default settings

mxdev provides default settings which can be used inside package or custom sections.

directory

Contains the current working directory and can be used like this

[sectionname]
param = ${settings:directory}/some/path

Subsequent package source sections

All other sections are defining the sources to be used.

[PACKAGENAME]

The section name is the package name.

url = URL

The checkout URL of the repository.

The URL is required.

pushurl = URL

Optional a writable URL for pushes can be specified.

If the pushurl is set after initial checkout it is not applied. To apply it remove the repository and checkout again.

vcs = VCS

The version control system to use.

Supported are:

• git (stable, tested)
• fs (stable, tested) - in fact no vcs, but points to a local directory. This can be achieved without mxdev by using -e PATH in the requirements input file.
• svn (unstable, test needs rewrite)
• gitsvn (unstable, test needs rewrite)
• hg (unstable, test needs rewrite)
• bzr (unstable, test needs rewrite)
• darcs (unstable, test needs rewrite)

Defaults to git.

branch = BRANCHNAME_OR_TAG

The branch name or tag to checkout.

Defaults to main.

extras = EXTRA1,EXTRA2

Package extras to install. Default empty.

subdirectory = SUBPATH

For specifying the path to the Python package, when it is not in the root of the VCS directory.

Default empty.

target

The target directory for source from this section.

Default to default target directory configured in the main section [settings] default-target = value.

install-mode

There are different modes of pip installation

skip

Do not install with pip, just clone/update the repository

direct

Install the package using pip -e PACKAGEPATH. Dependencies are resolved immediately

Defaults to default mode configured in main section [settings] default-install-mode = value.

use

True by default, unless default-use in the general settings is false. When false, the source is not checked out, and the version for this package is not overridden.

submodules

There are 3 different options:

always

(default) git submodules will always be checked out, they will be updated if already presen

checkout

submodules get only fetched during checkout, existing submodules stay untouche

recursive

Fetches submodules recursively, results in git clone --recurse-submodules on checkout and submodule update --init --recursive on update.

Usage

Run mxdev (for more options run mxdev --help).

Mxdev will

1. read the configuration from mx.ini,
2. fetch the packages defined in the config file and
3. write a requirements and constraints file.

Now, use the generated requirements and constraints files with i.e. pip install -r requirements-mxdev.txt.

mxdev >=4.0 needs pip version 23 at minimum to work properly

Example Configuration

Example mx.ini

This looks like so:

[settings]
requirements-in = requirements.txt
requirements-out = requirements-mxdev.txt
contraints-out = constraints-mxdev.txt

version-overrides =
    baz.baaz = 1.9.32

ignores =
    my.ignoredpackage

# custom variables
github = git+ssh://[e-mail]/
mygit = git+ssh://[e-mail]/

[foo.bar]
url = ${settings:github}orga/foo.bar.git
branch = fix99
extras = test,baz

[kup.fancyproject]
url = ${settings:mygit}customers/fancycorp/kup.fancyproject.git
branch = fix99
extras = test,baz

Examples at GitHub

• "new" plone.org backend
• Conestack
• (add more)

Extending

The functionality of mxdev can be extended by hooks. This is useful to generate additional scripts or files or automate any other setup steps related to mxdev's domain.

Extension configuration settings end up in the mx.ini file. They can be added globally to the settings section, as dedicated config sections or package specific. To avoid naming conflicts, all hook-related settings and config sections must be prefixed with a namespace.

It is recommended to use the package name containing the hook as a namespace.

This looks like so:

[settings]
myextension-global_setting = 1

[myextension-section]
setting = value

[foo.bar]
myextension-package_setting = 1

The extension is implemented as a subclass of mxdev.Hook:

from mxdev import Hook
from mxdev import State

class MyExtension(Hook):

    namespace = None
    """The namespace for this hook."""

    def read(self, state: State) -> None:
        """Gets executed after mxdev read operation."""

    def write(self, state: State) -> None:
        """Gets executed after mxdev write operation."""

The default settings section from the INI file is available at state.configuration.settings. The package configuration is available at state.configuration.packages. Hook-related config sections are available at state.configuration.hooks.

The hook must be registered as an entry point in the pyproject.toml of your package:

[project.entry-points.mxdev]
hook = "myextension:MyExtension"

Rationale

Problem

There is a constraint file like -c constraints.txt with a package foo.bar with a version pin. Then it is not possible to install this package in a requirements file editable like -r requirements.txt with -e git+ssh://[e-mail]/orga/foo.bar.git@fix-99. Neither it is possible to override inherited version constraints with custom ones.

Idea

A pre-processor fetches (as this can be an URL) and expands all -c SOMEOTHER_FILE_OR_URL and -r SOMEOTHER_FILE_OR_URL files into one, filtering out all packages given in a configuration file. For each of those packages, a -e ... entry is generated instead and written to a new TARGET.txt. Same is true for version overrides: a new entry is written to the resulting constraints file while the original version is disabled. The configuration is read from a file mx.ini in ExtendedInterpolation INI syntax (YAML would be nice, but the package must have as less dependencies as possible to other packages).

Trivia

Mx (generally pronounced like mix [mɪks], or [məks] in the UK) is meant to be a gender-neutral alternative to the titles Mr. and Ms. but also associates with the word "mix".

Misc

The VCS-related code is taken from mr.developer. Thanks to Florian Schulze and Contributors.

Contributing

If you want to help with the development (improvement, update, bug-fixing, ...) of mxdev this is a great idea!

The code is located in the GitHub MXStack Organization / mxdev.

You can fork it, work on the project and create a pull request.

Maintainers are Jens Klein and the BlueDynamics Alliance developer team.

We appreciate any contribution! If you have an idea, found a bug, want to drop us a question, or a release is needed, please just file an issue at the mxdev issue tracker.

Changes

4.0.2 (2024-03-13)

• Fix #42: deprecated use of pkg_resoures to load entry points and parse requirements. This enables mxdev to work on Python 3.12, where pkg_resources is no longer installed by default in virtual_envs. [jensens]

4.0.1 (2024-03-01)

• Fix specifying out a revision (#40) [pbauer]

4.0.0 (2024-02-28)

• Breaking: Remove --pre on sources from generated requirements-mxdev.txt. Usually it is not needed any longer, at least withy pip 23.x. This is a breaking change if you rely on the --pre option being present in the generated file. Now the --pre option should be added to pip install when the generated file is used. This change enables the use of the generated file with the alternative pip replacement uv. [jensens]

• Breaking: Drop official support for Python 3.7 (it is end of life). [jensens]

• Document mx.ini sections vcs setting. [jensens]

3.1.0 (2023-12-10)

• Feature: Provide directory default setting [rnix]
• Feature: Include other INI config files [jensens]

3.0.0 (2023-05-08)

• Removed leftover print [jensens]

3.0.0b3 (2023-04-23)

• Fix usage of --install-option='pre' and use --pre option in requirements files instead. The install options are deprecated in pip 23 which Plone switched to recently. More info: https://github.com/pypa/pip/issues/11358 https://discuss.python.org/t/passing-command-line-arguments-to-pip-install-after-install-options-deprecation/22981/6 [thet, fredvd]

• Fix reading sections from the config parser without defaults if the section contains a setting that also exists as default. [rnix]

• Do not write constraints out to the file if no constraints are defined. [rnix]

• Add the main-package option to the settings. [rnix]

3.0.0b2 (2023-02-07)

• In this package, use pyproject.toml and markdown for README et al. [jensens]

• Add use option to sources, and default-use to the settings. default-use is true by default. When false, the source is not checked out, and the version for this package is not overridden. [maurits]

3.0.0b1 (2022-11-21)

• Do not use libvcs, but recycled and updated (type hints, tests) mr.developer VCS code. Code for GIT is tested well, code for SVN, Mercurial, Bazaar and DARCS needs contributors with knowledge in this area. Additional options, like pushurl, ... (see README) were added. pip style VCS URLs are not supported any longer. [jensens, rnix, zworkb]

• Config parser options are now considered case-sensitive. [rnix]

• Do not fail mxdev run if requirements.txt is missing. [rnix]

• Add flag to only fetch repositories and skip generating files. [rnix]

• Add flag to skip fetching of repositories. [rnix]

• Add support for custom hooks. [rnix]

• Rename sources.ini to mx.ini in the documentation. [rnix]

• Introduce state object and pass it to read/fetch/write. State object contains all required runtime data. [rnix]

2.0.0 (2022-01-31)

• Depend on pip 22, where interdependency mode is no longer needed. Remove all interdependency-related code. [jensens]

• Better error message if the requirements-in file does not exist. [jensens]

• Better last message with the full pip command. [jensens]

• Allow empty requirements-in configuration. [jensens]

1.1.0 (2021-12-29)

• Feature: Ignore existing constraints. New setting ignores with a list of packages (one per line) to ignore constraints without providing a version. [jensens]

1.0.1 (2021-12-21)

• Fix: If a developed package depends on another developed package the dependent package was ignored sometimes (!?). Instead, the last release was taken. Solution: Install it with the --pre option in order to allow the other non-final/in-development release. [jensens]

1.0.0 (2021-12-12)

• Defaults for "outfiles" are *-mxdev.txt now. [jensens]

1.0.0b4 (2021-12-07)

• Fix interdependency mode. [jensens]

1.0.0b3 (2021-12-07)

• Fix: Do not apply override disabling on requirements. [jensens]

1.0.0b2 (2021-12-07)

• Add feature: version overrides. [jensens]

1.0.0b1 (2021-12-04)

• Add -s or --silent option. [jensens]

• Beautified output. [jensens]

• Fixed missing CR if *.txt does not end with a newline. [jensens]

1.0.0a9 (2021-12-01)

• Added auto correction for pip URLs, so that GitHub or GitLab URLs can be used as copied in sources.ini. [zworkb]

1.0.0a8 (2021-11-30)

• Added interdependency handling to avoid manual dependency order resolution. [jensens, gogobd]

• Added skip mode to exclude packages from installation (clone/update only). [jensens, gogobd]

• Removed position feature. [jensens, gogobd]

1.0.0a7 (2021-11-30)

• Removed Workaround for libvcs and depend on libvcs>=0.10.1. [jensens]

1.0.0a6 (2021-11-30)

• Workaround for libvcs bug https://github.com/vcs-python/libvcs/issues/295 [jensens, gogobd]

1.0.0a5 (2021-11-30)

• Workaround for libvcs bug https://github.com/vcs-python/libvcs/issues/293 [jensens, gogobd]

1.0.0a4 (2021-11-29)

• Fix: editable can be configured to be processed before or after initial requirements. [jensens]

1.0.0a3 (2021-11-23)

• Fix #1: Re-run of pip vanishes committed changes [jensens]

1.0.0a2 (2021-11-21)

• Fix/simplify packaging. [jensens]

• Implement subdirectory editable install [jensens]

• Implement package extras [jensens]

1.0.0a1 (2021-11-21)

• Initial work. [jensens]

License

Copyright (c) 2022-2023, mxstack Contributors

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.