napari-turing 0.3.2

A plugin to run simmple simulations of Turing patterns

napari-turing

A plugin to run simple simulations of Turing patterns

---

This napari plugin was generated with Cookiecutter using @napari's cookiecutter-napari-plugin template.

Installation

You can install napari-turing via pip after downloading the content of

pip install napari-turing

To install latest version :

pip install git+https://github.com/leoguignard/napari-turing.git

Troubleshooting

If the installation does not work just with the previous command, it might be useful to first install napari for example that way:

conda install napari

Creating a new model

To create your own model, you can use the template for models here.

Note that a bit of knowledge in Python is probably necessary and it might not be completely trivial at first but you'll manage :)

First you need to name the concentrations that you will use with the following line:

    _concentration_names = ["A", "I"]

Then, you need to declare its variables. For example you can create a parameter named mu_a the following way (here in the code):

    mu_a = ModelParameter(
        name="mu_a",  # Name of the parameter
        description="Activator diffusion coefficient (10^-4)",  # Description of the parameter for napari
        value=2.8,  # Initial and default value
        min=1,  # Minimum value the parameter can take
        max=5,  # Maximum value the parameter can take
        exponent=1e-4,  # All values given to this instance of the class will but multiplied by this value
    )

Then you need to list the parameters that are necessary to run the model (usually all the paramaters declared previously) and the parameters that you will allow the user to tune (for example, sometimes some of the parameters are co-dependent and there is no point in being able to tune both of them). That should be done the following way (here in the code):

    # These are the parameters that are necessary to run the equations.
    _necessary_parameters = [tau, k, mu_a, mu_i]
    # These are the parameters that can be modified via napari
    _tunable_parameters = _necessary_parameters

If you want, you can specify what the method will return as a string, it will be displayed in the napari viewer (here in the code):

    # This function allows to display some information about the model
    # in napari
    def __str__(self) -> str:
        return (
            "Equations (FitzHugh-Nagumo model):\n"
            "  Concentration of Activator (a) and Inhibitor (i)\n"
            "    - da/dt = mu_a * diffusion(a) + a - a^3 - i + k\n"
            "    - tau * di/dt = mu_i * diffusion(i) + a - i"
        )

Now that the basics are declared, you will need to declare how to initialize your concentrations the following way (here in the code):

    # The following allows to reset the values of the concentrations.
    # The function takes the name of the concentration to initialize.
    # If no name is given or if it is None all the concentrations are
    # reinitialized.
    #
    # The reason why this function is useful is that some models 
    # require specific initialisations for them to work correctly
    # In the following example the concentrations are reintinalized
    # to a random value between -1 and 1.
    # This is the default behavior, so if you don't need to change
    # it you don't have to implement the function.
    def init_concentrations(self, C: Optional[str] = None) -> None:
        if C is None:
            for ci in self.concentration_names():
                self[ci] = np.random.random((self.size, self.size)) * 2 - 1
        else:
            self[C] = np.random.random((self.size, self.size)) * 2 - 1

In the previous example, the all concentrations are initialized the same way. If you need to have different initializations, you can do it the following way for example (from the GrayScott model):

    def init_concentrations(self, C: Optional[str] = None) -> None:
        if C == "X" or C is None:
            self["X"] = np.ones((self.size, self.size))
        if C == "Y" or C is None:
            Y = np.zeros((self.size, self.size))
            nb_pos = 20
            pos = (np.random.random((2, nb_pos)) * self.size).astype(int)
            Y[pos[0], pos[1]] = 1
            self["Y"] = Y

In this model, there are two concentrations, X and Y which are initialized differenty. Note that they can be accessed using self["X"] or self.X.

Finally, you of course have to define the reaction equations and the diffusion equations. The way it is defined is with two functions, one for the reaction and one for the diffusion, that take as an input the name of the concentration to apply the function to and returns the new values. Then for each of your concentrations, their new values will be computed as followed:

new_concentration = current_concentration + dt*(reaction + diffusion)

Here is an example for the reaction function (here in the code):

    # This function defines the equations of the reactions.
    # It takes as an input which concentration to compute
    # (in this example we have to define how to compute A and I)
    def _reaction(self, c: str) -> np.ndarray:
        if c == "A":
            # Below is the reaction part of the equation (1)
            return self.A - self.A**3 - self.I + self.k 
        elif c == "I":
            # Below is the reaction part of the equation (2)
            return (self.A - self.I) / self.tau

Of course, if you have more concentrations, you will need to define more equations.

Here is an example for the reaction function (here in the code):

    # This function defines the equations of the diffusion.
    # It takes as an input which concentration to compute
    # (in this example we have to define how to compute A and I)
    # Here we compute the diffusion as follow:
    # A cell gives an equal fraction mu of its concentration to its neighbors
    # A cell recieves an equal fraction mu of concentration from its neighbors
    # Neighbors = (left, right, above, below)
    # In the case of oriented diffusion the amount recieved and given to the neighbors
    # is imbalanced according to the position of the neighbor.
    def _diffusion(self, c: str) -> np.ndarray:
        if c == "A":
            arr = self.A # Define the array of concentrations to diffuse for the reageant A
            mu = self.mu_a # Define the diffusion coefficient for the reageant A
        elif c == "I":
            arr = self.I # Define the array of concentrations to diffuse for the reageant I
            mu = self.mu_i # Define the diffusion coefficient for the reageant I
        
        # Computes what is recieved from neighboring cells
        from_cell = convolve(arr, self.kernel.value, mode="constant", cval=0)
        # Computes what is given to neighboring cells
        to_cell = self.nb_neighbs * arr

        # Computes the diffusion
        out = mu * (from_cell - to_cell) / (self.dx * self.dy)

        # In our case, the equation (2), for I specify that it has to be divided by tau
        if c == "I":
            out /= self.tau
        return out

The diffusion function is usually a standard one so it might not be necessary to overly change it.

You can find other model examples:

• Brusselator
• GrayScott
• GameOfLife

Once all that is done, let say you've saved your new model in the folder Models under the name NewModel.py and the model class created is name NewModel. Then you need to declare you model in the _model_list.py file. To do so you need to add the following lines in the file:

from enum import Enum
from .FitzHughNagumo import FitzHughNagumo
from .Brusselator import Brusselator
from .GrayScott import GrayScott
from .GameOfLife import GameOfLife
from .NewModel import NewModel ## THAT LINE HERE

class AvailableModels(Enum):
    FitzHughNagumo = FitzHughNagumo
    Brusselator = Brusselator
    GrayScott = GrayScott
    GameOfLife = GameOfLife
    NewModel = NewModel ## AND THAT OTHER LINE HERE

Contributing

Contributions are very welcome.

License

Distributed under the terms of the MIT license, "napari-turing" is free and open source software

Issues

If you encounter any problems, please file an issue along with a detailed description.