Skip to main content

patterned (holographic) optogenetic extension to NWB standard

Project description

ndx-patterned-ogen Extension for NWB

This is a NeuroData Without Borders (NWB) extension for storing data and metadata from patterned optogenetic (holographic) photostimulation methods. It includes containers for storing photostimulation-specific device parameters, photostimulation target, stimulation patterns and time interval data related to photostimulation.

extension schema


We release ten PyNWB containers as part of this extension (we currently only have a Python implementation, rather than both Python and a MATLAB ones -- this is why the matnwb directory is empty):

  • The SpatialLightModulator2D/SpatialLightModulator3D and LightSource containers store metadata about the spatial light modulator (either bidimensional or threedimensional) and light source used in the photostimulation, respectively. These containers are then linked to the PatternedOptogeneticStimulusSite parent container, which stores the remaining photostimulation method-specifici metadata.
  • OptogeneticStimulusPattern stores parameters for a generic photostimulation pattern.
    • TemporalFocusing stores parameters associated with the temporal focusing pattern.
    • SpiralScanning stores parameters associated with the spiral scanning pattern.
  • OptogeneticStimulusTarget container stored a subset of targeted ROIs targeted_rois, that is a DynamicTableRegion referencing the rows of a PlaneSegmentation. Optionally, we can store the corresponding segmented ROIs that have been successfully photostimulated. segmented_rois is also a DynamicTableRegion referencing the rows of a PlaneSegmentation. Since not all targeted ROIs may result in an actual photostimulation a global_roi_ids column should be added to both PlaneSegmentation object to express the correspondence between the targeted and segmented ROIs.
  • PhotostimulationTable is an TimeIntervals table. Each row stores a stimulus onset - defined by start, stop, power (optionally frequency and pulse_width). Each stimulus onset reference a specific OptogeneticStimulusTarget and PhotostimulationPattern NB: When power(frequency and pulse_width) is defined, its value apply to all the ROIs in targets. When power_per_roi(frequency_per_roi and pulse_width_per_roi) id defined, the length must equal to the number of ROIs in targets, and each element refers to a specific targeted ROI.

Background

State-of-the-art patterned photostimulation methods, used in concert with two-photon imaging, allow unprecedented control and measurement of cell activity in the living brain. Methods for managing data for two-photon imaging experiments are improving, but there is little to no standardization of data for these stimulation methods. Stimulation in vivo depends on fine-tuning many experimental variables, which poses a challenge for reproducibility and data sharing between researchers. To improve standardization of photostimulation data storage and processing, we release this extension as a generic data format for simultaneous patterned optogenetic stimulation experiments, using the NWB format to store experimental details and data relating to both acquisition and photostimulation.

Installation

To install the extension, first clone the ndx-patterned-ogen repository to the desired folder using the command

git clone https://github.com/https://github.com/catalystneuro/ndx-patterned-ogen.git

Then, to install the requisite python packages and extension, run:

python -m pip install -r requirements.txt -r requirements-dev.txt
python setup.py install

The extension can then be imported into python scripts via import ndx_patterned_ogen.

Usage

For full example usage, see tutorial.ipynb

Example Usage for the ndx-patterne-ogen-stimulation for 2D stimulus

In the following tutorial, we demonstrate use of the ndx-patterned-ogen extension to the NWB data standard. Specifically we:

  1. Create SpatialLightModulator2D and LightSource containers, representing the devices used in the paradigm.
  2. Use the PatternedOptogeneticStimulusSite container to store information about location, the opsin and excitation wavelength used in the paradigm
  3. Use the OptogeneticStimulus2DPattern (or SpiralScanning or TemporalFocusing) container to store the pattern-specific parameters of the stimulus onset.
  4. Record the stimulus presentation within the PatternedOptogeneticStimulusTable container
  5. Write all devices, stimuli, and presentation tables to an .nwb file and confirm it can be read back
# First, we import then necessary files and create an empty `NWBFile`.
import datetime
import numpy as np
from pynwb import NWBFile, NWBHDF5IO
from ndx_patterned_ogen import (
    SpatialLightModulator2D,
    LightSource,
    PatternedOptogeneticStimulusSite,
    PatternedOptogeneticStimulusTable,
    OptogeneticStimulus2DPattern,
    OptogeneticStimulusTarget,
    SpiralScanning,
    TemporalFocusing,
)
from hdmf.common.table import DynamicTableRegion

from pynwb.ophys import PlaneSegmentation, ImageSegmentation, OpticalChannel

nwbfile = NWBFile(
    session_description="patterned optogenetic synthetic experiment (all optical system)",
    identifier="identifier",
    session_start_time=datetime.datetime.now(datetime.timezone.utc),
)

# metadata for spiatial light modulator
spatial_light_modulator = SpatialLightModulator2D(
    name="SpatialLightModulator2D",
    description="Generic description for the slm",
    model="slm model",
    manufacturer="slm manufacturer",
    spatial_resolution=[512, 512],
)
nwbfile.add_device(spatial_light_modulator)

# metadata for the light source
light_source = LightSource(
    name="Laser",
    model="laser model",
    manufacturer="laser manufacturer",
    stimulation_wavelength=1035.0,  # nm
    filter_description="Short pass at 1040 nm",
    description="Generic description for the laser",
    peak_power=70e-3,  # the peak power of stimulation in Watts
    intensity=0.005,  # the intensity of excitation in W/mm^2
    exposure_time=2.51e-13,  # the exposure time of the sample in seconds
    pulse_rate=1 / 2.51e-13,  # the pulse rate of the laser is in Hz
)
nwbfile.add_device(light_source)

# metadata for the microscope
microscope = nwbfile.create_device(
    name="2P_microscope",
    description="My two-photon microscope",
    manufacturer="The best microscope manufacturer",
)

# metadata for the stimulus methods
site = PatternedOptogeneticStimulusSite(
    name="PatternedOptogeneticStimulusSite",
    description="Scanning",  # Scanning or scanless method for shaping optogenetic light (e.g., diffraction limited points, 3D shot, disks, etc.).
    excitation_lambda=600.0,  # nm
    effector="ChR2",
    location="VISrl",
    device=microscope,
    spatial_light_modulator=spatial_light_modulator,
    light_source=light_source,
)
nwbfile.add_ogen_site(site)

# For demonstrative purpose, we define here fout different stimulation pattern:
# 1. two generic where the `sweep_size` and the `sweep_mask` can be defined to describe the spatial pattern. If `sweep_size` is a scalar, the sweep pattern is assumed to be a circle with diameter `sweep_size`. If `sweep_size` is a two or three dimensional array, the the sweep pattern is assumed to be a rectangle, with dimensions [width, height]. If the shape is neither a circle or a rectangular, the shape can be save in `sweep_mask`.
# 2. one spiral pattern
# 3. one temporal focusing beam pattern

# metadata for a generic stimulus pattern
import numpy as np
import matplotlib.pyplot as plt


# auxiliary function to generate the sweep shape, either circular or rectangular
def generate_image_mask_np(width, height, sweep_size_in_pizels):
    # Create a black image mask
    image_mask = np.zeros((height, width), dtype=np.uint8)

    # Calculate the position for the center of the white spot
    center_x = width // 2
    center_y = height // 2

    if isinstance(sweep_size_in_pizels, int):
        # Circular spot
        Y, X = np.ogrid[:height, :width]
        dist_from_center = np.sqrt((X - center_x) ** 2 + (Y - center_y) ** 2)
        image_mask[dist_from_center <= sweep_size_in_pizels / 2] = 255

    elif len(sweep_size_in_pizels) == 2:
        # Rectangular spot
        half_width = sweep_size_in_pizels[0] // 2
        half_height = sweep_size_in_pizels[1] // 2
        top_left = (center_x - half_width, center_y - half_height)
        bottom_right = (center_x + half_width, center_y + half_height)
        image_mask[top_left[1] : bottom_right[1], top_left[0] : bottom_right[0]] = 255
    else:
        raise ValueError("Invalid sweep_size_in_pizels. Should be a scalar or a 2-element array.")
    return image_mask


sweep_size = 8
circular_image_mask_np = generate_image_mask_np(
    width=sweep_size * 2, height=sweep_size * 2, sweep_size_in_pizels=sweep_size
)  # assuming 1 pixel=1 um
generic_circular_pattern = OptogeneticStimulus2DPattern(
    name="CircularOptogeneticStimulusPattern",
    description="circular pattern",
    sweep_size=sweep_size,  # um
    # sweep_mask=circular_image_mask_np,
)
nwbfile.add_lab_meta_data(generic_circular_pattern)

# Display the image mask using matplotlib
plt.imshow(circular_image_mask_np, cmap="gray")
plt.show()

sweep_size = [5, 10]
rectangular_image_mask_np = generate_image_mask_np(width=20, height=20, sweep_size_in_pizels=sweep_size)
generic_rectangular_pattern = OptogeneticStimulus2DPattern(
    name="RectangularOptogeneticStimulusPattern",
    description="rectangular pattern",
    sweep_size=sweep_size,  # um
    sweep_mask=rectangular_image_mask_np,
)
nwbfile.add_lab_meta_data(generic_rectangular_pattern)

# Display the image mask using matplotlib
plt.imshow(rectangular_image_mask_np, cmap="gray")
plt.show()

# metadata for spiral scanning pattern
spiral_scanning = SpiralScanning(
    name="SpiralScanning",
    diameter=15,  # um
    height=10,  # um
    number_of_revolutions=5,
    description="scanning beam pattern",
)
nwbfile.add_lab_meta_data(spiral_scanning)

# metadata for temporal focusing pattern
temporal_focusing = TemporalFocusing(
    name="TemporalFocusing",
    description="scanless beam pattern",
    lateral_point_spread_function="9 um ± 0.7 um",
    axial_point_spread_function="32 um ± 1.6 um",
)
nwbfile.add_lab_meta_data(temporal_focusing)

# Define two `PlaneSegmentation` tables; one for post-hoc ROI (possibly cell) identification; the other for targeted ROIs. Additional columns on both tables can indicate if the ROI is a cell, and the two tables can be harmonized with the use of a global_roi_id field that matches ROI IDs from one table to the other.
# To do so, we need to define an `ImagingPlane` and an `OpticalChannel` first.
optical_channel = OpticalChannel(
    name="OpticalChannel",
    description="an optical channel",
    emission_lambda=500.0,
)
imaging_plane = nwbfile.create_imaging_plane(
    name="ImagingPlane",
    optical_channel=optical_channel,
    imaging_rate=30.0,
    description="a very interesting part of the brain",
    device=microscope,
    excitation_lambda=600.0,
    indicator="GFP",
    location="V1",
    grid_spacing=[0.01, 0.01],
    grid_spacing_unit="meters",
    origin_coords=[1.0, 2.0, 3.0],
    origin_coords_unit="meters",
)


# All the ROIs simultaneously illuminated are stored in `targeted_rois` in an `OptogeneticStimulusTarget` container, as a table region referencing the `TargetPlaneSegmentation`.
# In this example, the targeted ROIs are 45 in total, divided in 3 groups of 15 ROIs that will be simultaneously illuminated with the same stimulus pattern. Only 30 of them, 10 for each group, results in a successful photostimulation.
# Therefore, we define a `PlaneSegmentation` containing 30 ROIs in total and 3 `roi_table_region` containing 10 ROIs each that would be segmented after being stimulated, and stored in three separate `OptogeneticStimulusTarget` containers.
n_targeted_rois = 45
n_targeted_rois_per_group = n_targeted_rois // 3

targeted_rois_centroids = np.array([[i, i, 0] for i in np.arange(n_targeted_rois, dtype=int)])

targeted_plane_segmentation = PlaneSegmentation(
    name="TargetPlaneSegmentation",
    description="Table for storing the targeted roi centroids, defined by a one-pixel mask",
    imaging_plane=imaging_plane,
)

for roi_centroid in targeted_rois_centroids:
    targeted_plane_segmentation.add_roi(pixel_mask=[roi_centroid])

if nwbfile is not None:
    if "ophys" not in nwbfile.processing:
        nwbfile.create_processing_module("ophys", "ophys")
    nwbfile.processing["ophys"].add(targeted_plane_segmentation)

targeted_rois_1 = targeted_plane_segmentation.create_roi_table_region(
    name="targeted_rois",  # it must be called "segmented_rois"
    description="targeted rois",
    region=list(np.arange(n_targeted_rois_per_group, dtype=int)),
)

targeted_rois_2 = targeted_plane_segmentation.create_roi_table_region(
    name="targeted_rois",  # it must be called "segmented_rois"
    description="targeted rois",
    region=list(np.arange(n_targeted_rois_per_group, 2 * n_targeted_rois_per_group, dtype=int)),
)

targeted_rois_3 = targeted_plane_segmentation.create_roi_table_region(
    name="targeted_rois",  # it must be called "segmented_rois"
    description="targeted rois",
    region=list(np.arange(2 * n_targeted_rois_per_group, n_targeted_rois, dtype=int)),
)

n_segmented_rois = 30
n_segmented_rois_per_group = n_segmented_rois // 3

plane_segmentation = PlaneSegmentation(
    name="PlaneSegmentation",
    description="output from segmenting my favorite imaging plane",
    imaging_plane=imaging_plane,
)

# TODO add global_roi_id

for _ in range(n_segmented_rois):
    plane_segmentation.add_roi(image_mask=np.zeros((512, 512)))

if nwbfile is not None:
    if "ophys" not in nwbfile.processing:
        nwbfile.create_processing_module("ophys", "ophys")
    nwbfile.processing["ophys"].add(plane_segmentation)


segmented_rois_1 = plane_segmentation.create_roi_table_region(
    name="segmented_rois",  # it must be called "segmented_rois"
    description="segmented rois",
    region=list(np.arange(n_segmented_rois_per_group, dtype=int)),
)

segmented_rois_2 = plane_segmentation.create_roi_table_region(
    name="segmented_rois",
    description="segmented rois",
    region=list(np.arange(n_segmented_rois_per_group, 2 * n_segmented_rois_per_group, dtype=int)),
)

segmented_rois_3 = plane_segmentation.create_roi_table_region(
    name="segmented_rois",
    description="segmented rois",
    region=list(np.arange(2 * n_segmented_rois_per_group, n_segmented_rois, dtype=int)),
)


hologram_1 = OptogeneticStimulusTarget(name="Hologram1", segmented_rois=segmented_rois_1, targeted_rois=targeted_rois_1)
nwbfile.add_lab_meta_data(hologram_1)

hologram_2 = OptogeneticStimulusTarget(name="Hologram2", segmented_rois=segmented_rois_2, targeted_rois=targeted_rois_2)

nwbfile.add_lab_meta_data(hologram_2)

hologram_3 = OptogeneticStimulusTarget(name="Hologram3", targeted_rois=targeted_rois_3)

nwbfile.add_lab_meta_data(hologram_3)

# Define the stimulus sequences on the targeted ROIs previously defined in the imaging frame coordinates
# If `power`,`frequency` and `pulse_width` are defined as a scalar it is assumed that all the ROIs defined in `targets` receive the same stimulus `power`,`frequency` and `pulse_width`. However, we can also define `power`,`frequency` and `pulse_width` as 1D arrays of dimension equal to the number of ROIs in targets, so we can define different `power`,`frequency` and `pulse_width` for each target.
stimulus_table = PatternedOptogeneticStimulusTable(
    name="PatternedOptogeneticStimulusTable", description="Patterned stimulus"
)
stimulus_table.add_interval(
    start_time=0.0,
    stop_time=1.0,
    power=70e-3,
    frequency=20.0,
    pulse_width=0.1,
    stimulus_pattern=temporal_focusing,
    targets=nwbfile.lab_meta_data["Hologram1"],
    stimulus_site=site,
)
stimulus_table.add_interval(
    start_time=0.5,
    stop_time=1.0,
    power=50e-3,
    stimulus_pattern=spiral_scanning,
    targets=hologram_2,
    stimulus_site=site,
)
stimulus_table.add_interval(
    start_time=0.8,
    stop_time=1.7,
    power=40e-3,
    frequency=20.0,
    pulse_width=0.1,
    stimulus_pattern=generic_circular_pattern,
    targets=hologram_3,
    stimulus_site=site,
)
nwbfile.add_time_intervals(stimulus_table)

hologram_3.add_segmented_rois(segmented_rois_3)

# Write and read the NWB File
nwbfile_path = "basics_tutorial_patterned_ogen.nwb"
with NWBHDF5IO(nwbfile_path, mode="w") as io:
    io.write(nwbfile)

with NWBHDF5IO(nwbfile_path, mode="r") as io:
    nwbfile_in = io.read()

Documentation

Specification

Documentation for the extension's specification, which is based on the YAML files, is generated and stored in the ./docs folder. To create it, run the following from the home directory:

cd docs
make fulldoc

This will save documentation to the ./docs/build folder, and can be accessed via the ./docs/build/html/index.html file.

API

To generate documentation for the Python API (stores in ./api_docs), we use Sphinx and a template from ReadTheDocs. API documentation can be created by running

sphinx-build -b html api_docs/source/ api_docs/build/

from the home folder. Similar to the specification docs, API documentation is stored in ./api_docs/build. Select ./api_docs/build/index.html to access the API documentation in a website format.

Credit

Code by Alessandra Trapani. Collaboration between the CatalystNeuro Team and Histed Lab.

This extension was created using ndx-template.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

ndx_patterned_ogen-0.1.0.tar.gz (24.6 kB view hashes)

Uploaded Source

Built Distribution

ndx_patterned_ogen-0.1.0-py3-none-any.whl (14.2 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page