Bunch of utils to simplify linux network troubleshooting and performance tuning.
Project description
netutils-linux
======
.. image:: https://travis-ci.org/strizhechenko/netutils-linux.svg?branch=master
:target: https://travis-ci.org/strizhechenko/netutils-linux
It's just a bunch of utils to simplify linux network troubleshooting and performance tuning.
Project state
======
Beta. Six script were gathered together, shortly documented, one has tests and packed into python package.
Some were cleaned up, some - not. Most of them was being written in bash, not python, maybe they'll be ported later.
Installation
======
.. code :: shell
pip install netutils-linux
Utils
======
irqtop
------
- Show you a rate of interrupts
- based on /proc/interrupts file
- Hides interrupts with small rate to show a better picture.
softirq-net-rx-top
------
- Show you a rate of receiving packets
- Based on /proc/softirqs
- Sometimes shows much more CPUs than really exists
missed-pkts-monitor
------
- Detects when were packets missed (maybe it will give some idea of correlation with something)
- Easy to use in tactical, not strategic debug, without deployment of graphite/influxdb
- Based on ip -s -s link output
link-rx-rate
------
- Shows how many packets/bytes network interface receives
- Based on /proc/net/dev
rss-ladder
------
Automatically set smp_affinity_list for IRQ of NIC rx/tx queues for ixgbe/igb/vmxnet3 drivers (they usually work on CPU0 out of box).
Based on lscpu's output.
It also supports double/quad ladder in case of multiprocessor systems (but you better explicitely specify queue count == core per socket as NIC's driver's param).
autorps
------
Enables RPS of NIC on all available CPUs. It may be good for small servers with cheap network cards or bunch of VLAN.
Later, there will be a support for enable RPS only for subgroup of CPUs based on L3 caches.
maximize-cpu-freq
------
Sets every CPU scaling governor mode to performance and set max scaling value for min scaling value. So you will be able to use all power of your processor (useful for latency sensible systems).
======
.. image:: https://travis-ci.org/strizhechenko/netutils-linux.svg?branch=master
:target: https://travis-ci.org/strizhechenko/netutils-linux
It's just a bunch of utils to simplify linux network troubleshooting and performance tuning.
Project state
======
Beta. Six script were gathered together, shortly documented, one has tests and packed into python package.
Some were cleaned up, some - not. Most of them was being written in bash, not python, maybe they'll be ported later.
Installation
======
.. code :: shell
pip install netutils-linux
Utils
======
irqtop
------
- Show you a rate of interrupts
- based on /proc/interrupts file
- Hides interrupts with small rate to show a better picture.
softirq-net-rx-top
------
- Show you a rate of receiving packets
- Based on /proc/softirqs
- Sometimes shows much more CPUs than really exists
missed-pkts-monitor
------
- Detects when were packets missed (maybe it will give some idea of correlation with something)
- Easy to use in tactical, not strategic debug, without deployment of graphite/influxdb
- Based on ip -s -s link output
link-rx-rate
------
- Shows how many packets/bytes network interface receives
- Based on /proc/net/dev
rss-ladder
------
Automatically set smp_affinity_list for IRQ of NIC rx/tx queues for ixgbe/igb/vmxnet3 drivers (they usually work on CPU0 out of box).
Based on lscpu's output.
It also supports double/quad ladder in case of multiprocessor systems (but you better explicitely specify queue count == core per socket as NIC's driver's param).
autorps
------
Enables RPS of NIC on all available CPUs. It may be good for small servers with cheap network cards or bunch of VLAN.
Later, there will be a support for enable RPS only for subgroup of CPUs based on L3 caches.
maximize-cpu-freq
------
Sets every CPU scaling governor mode to performance and set max scaling value for min scaling value. So you will be able to use all power of your processor (useful for latency sensible systems).
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
netutils-linux-0.3.4.tar.gz
(6.6 kB
view details)
File details
Details for the file netutils-linux-0.3.4.tar.gz.
File metadata
- Download URL: netutils-linux-0.3.4.tar.gz
- Upload date:
- Size: 6.6 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 |
6a15c3a0b663e9992f40fec761fb13db15ec6110d4c67a6866c200c85903f5df
|
|
| MD5 |
274cb45a2f8ceabbfe983a97247b6ae8
|
|
| BLAKE2b-256 |
b1ca3efb4165881638e1e7da368a2909512d2d610782324463bf5f461cf63ebc
|
