Skip to main content

The tool for migrating SystemLink data.

Project description

NI-SystemLink-Migration tool nislmigrate

nislmigrate is a command line utility for migration, backup, and restore of supported SystemLink services.

Prerequisites

1. SystemLink

  • This tool offically supports migration between SystemLink versions 21.0, 21.1, 21.3, & 21.5. Other versions have not been tested.
  • We assume the server you are migrating to is clean with no data. Migrating to a server with existing data will result in data loss.
  • Services that are supported with any caveats and exceptions are detailed in the Supported Services section below.
  • This tool assumes a single-box SystemLink installation.
  • This tool must be run on the same machines as the SystemLink installations.

2. Python

  • This tool requires Python 3.8 to run.
  • The documentation in this repository assumes Python has been added to your PATH.

Installation

The latest released version of the tool can be installed by running:

pip install nislmigrate

Usage

Backup

To backup the data for a service listed in the Supported Services section run the tool with elevated permissions and use the capture option with the corresponding flag for each of the services you want to back up (e.g. --security):

nislmigrate capture --security

This will backup the data corresponding with each service into the default migration directory (C:\Users\[user]\Documents\migration\). You can specify a different migration directory using the --dir [path] option:

nislmigrate capture --security --dir C:\custom-backup-location

To backup the data for all supported services at once, the --all flag can be used instead of listing out each individual service. Using --all will require that you include the --secret flag for services that require encrypting backed up data for security:

nislmigrate capture --all --secret <password>

Restore

:warning: Restoring requires the --force flag to explicitly allow overwriting the existing data on the server. Without it, the command will fail.

To restore the data for a service listed in the Supported Services section run the tool with elevated permissions and use the restore option with the corresponding flag for each of the services you want to restore (e.g. --security):

nislmigrate restore --security

This will restore the data corresponding with each service from the default migration directory (C:\Users\[user]\Documents\migration\). If your captured data is in a different directory that can be specified with the --dir [path] option:

nislmigrate restore --security --dir C:\custom-backup-location

To restore the data for all supported services at once, the --all flag can be used instead of listing out each individual service. Using --all will require that you include the --secret flag for services that require encrypting backed up data for security:

nislmigrate restore --all --secret <password>

Modify

To modify entries in the database in-place without doing a restore run the tool with elevated permissions and use the modify option. modify currently only works to modify the files' service database entries.

Updating after moving files

After moving the storage location of the files uploaded to the Files service the database will need to be updated to reflect the new location. The --files-change-file-store-root argument can be used for this, either as part of a restore operation or in-place as part of a modify operation. When used with restore the old root location is inferred from the database. When used with modify the old root location must be specified with the --files-file-store-root argument.

:warning: modify will modify the database directly. A backup of the database should be taken before any modifiations using nislmigrate capture --files --files-metadata-only

To modify the files root location after moving the files to a new drive:

cp -r -f C:\old\file\store X:\new\file\store
nislmigrate modify --files --files-change-file-store-root X:\new\file\store --files-file-store-root C:\old\file\store

To modify the files root location after moving the files to an S3 bucket:

aws s3 sync C:\old\file\store s3://my-systemlink-bucket/my-files
nislmigrate modify --files --files-change-file-store-root s3://my-systemlink-bucket/my-files --files-file-store-root C:\old\file\store --files-switch-to-forward-slashes

Migration

:warning: Server B must be a clean SystemLink installation, any existing data will be deleted.

To migrate from one SystemLink server instance (server A) to a different instance (server B):

  1. Install the migration tool on server A and server B.
  2. Follow the backup instructions to backup the data from server A.
  3. Copy the data produced by the backup of server A on server B.
  4. Warning: Ensure server B is a clean SystemLink installation, any existing data will be deleted.
  5. Follow the restore instructions to restore the backed up data onto server B.

Development

See CONTRIBUTING.MD for detailed instructions on developing, testing, and releasing the tool.

Supported Services

The services that can be migrated with this utility along with short descriptions can be listed by running:

nislmigrate capture -h

Most services require migrating the --security service at the same time for the migration to be successful, and some services have additional dependencies which are listed in the table below.

Supported Service Argument Flag Also requires migrating Additional Notes
Security --security
User Data --userdata --security
Notifications --notification --security
File Ingestion --files --security - Must migrate file to the same storage location on the new System Link server.
- To capture/restore only the database but not the files themselves, use --files --files-metadata-only. This could be useful if, for example, files are stored on a file server with separate backup.
- If files are stored in Amazon Simple Storage Service (S3), use --files --files-metadata-only.
- If the file store path is different on the server you are restoring to, use the --files-change-file-store-root [NEW_ROOT] flag to update the metadata of all files to point to the new root during a restore operation.
- If you have uploaded your local files to S3 and need to update the file path metadata, use --files-change-file-store-root [S3://<bucket-name>/<folder-path-if-applicable>] along with --files-switch-to-forward-slashes.
Repository --repo --security - Feeds may require additional updates if servers used for migration have different domain names
Dashboards and Web Applications --dashboards --security
System States --systemstates --security - Feeds may require additional updates if servers used for migration have different domain names
- Cannot be migrated between 2020R1 and 2020R2 servers
Tag Ingestion and Tag History --tags --security
Tag Alarm Rules --tagrule --security
--notification
Alarm Instances --alarms --security
--notification
- Cannot be migrated between 2020R1 and 2020R2 servers
Asset Alarm Rules --assetrule --security
--notification
Asset Management --assets --security
--files
--tags
Test Monitor --tests --security
--file
Systems --systems --security
--tags
--file
- WARNING: Captured systems data contains encrypted secret information and should not be copied to a publicly accessible location.
- To capture/restore systems, a secret must be provided using the --secret <SECRET> command line flag. Captured systems data will require the same secret to be provided as was provided during capture in order to be able to decrypt sensitive data.

There are plans to support the following services in the future:

  • OPC UA Client: --opc
  • TDM --tdm
  • Cloud Connector --cloud

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

nislmigrate-1.1.0.tar.gz (27.6 kB view hashes)

Uploaded Source

Built Distribution

nislmigrate-1.1.0-py3-none-any.whl (39.3 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page