Skip to main content

Nexus Data writer implemented as a Tango Server

Project description

Authors: Jan Kotanski, Eugen Wintersberger, Halil Pasic

Introduction

NXSDataWriter is a Tango server which allows to store NeXuS Data in H5 files.

The server provides storing data from other Tango devices, various databases as well as passed by a user client via JSON strings.

Tango Server API: https://nexdatas.github.io/writer/doc_html

Installation

Install the dependencies:

pni-libraries, PyTango, numpy

From sources

Download the latest NexDaTaS version from

Extract sources and run

$ python setup.py install

Debian packages

Debian Jessie (and Wheezy) packages can be found in the HDRI repository.

To install the debian packages, add the PGP repository key

$ sudo su
$ wget -q -O - http://repos.pni-hdri.de/debian_repo.pub.gpg | apt-key add -

and then download the corresponding source list

$ cd /etc/apt/sources.list.d
$ wget http://repos.pni-hdri.de/jessie-pni-hdri.list

Finally,

$ apt-get update
$ apt-get install python-nxswriter

To instal other NexDaTaS packages

$ apt-get install python-nxstools nxsconfigserver-db python-nxsconfigserver nxsconfigtool

and

$ apt-get install python-nxsrecselector nxselector python-sardana-nxsrecorder

for Component Selector and Sardana related packages.

Setting NeXus Writer Server

To set up NeXus Writer Server run

$ nxsetup -x NXSDataWriter

The nxsetup command comes from the python-nxstools package.

Installation from sources

Extract sources and run

$ python setup.py install

Client code

In order to use Nexus Data Server one has to write a client code. Some simple client codes are in the nexdatas repository. In this section we add some comments related to the client code.

# To use the Tango Server we must import the PyTango module and
# create DeviceProxy for the server.

import PyTango

device = "p09/tdw/r228"
dpx = PyTango.DeviceProxy(device)
dpx.set_timeout_millis(10000)

dpx.Init()

# Here device corresponds to a name of our Nexus Data Server.
# The Init() method resets the state of the server.

dpx.FileName = "test.h5"
dpx.OpenFile()

# We set the name of the output HDF5 file and open it.

# Now we are ready to pass the XML settings describing a structure of
# the output file as well as defining a way of data storing.
# Examples of the XMLSettings can be found in the XMLExamples directory.

xml = open("test.xml", 'r').read()
dpx.XMLSettings = xml

dpx.JSONRecord = '{"data": {"parameterA":0.2},
                      "decoders":{"DESY2D":"desydecoders.desy2Ddec.desy2d"},
                      "datasources":{
                           "MCLIENT":"sources.DataSources.LocalClientSource"}
}'

dpx.OpenEntry()

# We read our XML settings settings from a file and pass them to the server via
# the XMLSettings attribute. Then we open an entry group related to the XML
# configuration. Optionally, we can also set JSONRecord, i.e. an attribute
# which contains a global JSON string with data needed to store during opening
# the entry and also other stages of recording. If external decoder for
# DevEncoded data is need one can registred it passing its packages and
# class names in JSONRecord,
# e.g. "desy2d" class of "DESY2D" label in "desydecoders.desy2Ddec" package.
# Similarly making use of "datasources" records of the JSON string one can
# registred additional datasources. The OpenEntry method stores data defined
# in the XML string with strategy=INIT.
# The JSONRecord attribute can be changed during recording our data.

# After finalization of the configuration process we can start recording
# the main experiment data in a STEP mode.

dpx.Record('{"data": {"p09/counter/exp.01":0.1, "p09/counter/exp.02":1.1}}')

# Every time we call the Record method all nexus fields defined with
# strategy=STEP are extended by one record unit and the assigned to them data
# is stored. As the method argument we pass a local JSON string with the client
# data. To record the client data one can also use the global JSONRecord string.
# Contrary to the global JSON string the local one is only
# valid during one record step.

dpx.Record('{"data": {"emittance_x": 0.1},  "triggers":["trigger1", "trigger2"]  }')

# If you denote in your XML configuration string some fields by additional
# trigger attributes you may ask the server to store your data only in specific
# record steps. This can be helpful if you want to store your data in
# asynchronous mode. To this end you define in the local JSON string a list of
# triggers which are used in the current record step.

dpx.JSONRecord = '{"data": {"parameterB":0.3}}'
dpx.CloseEntry()

# After scanning experiment data in 'STEP' mode we close the entry.
# To this end we call the CloseEntry method which also stores data defined
# with strategy=FINAL. Since our HDF5 file can contain many entries we can again
# open the entry and repeat our record procedure. If we define more than one entry
# in one XML setting string the defined entries are recorded parallel
# with the same steps.

# Finally, we can close our output file by

dpx.CloseFile()

Additionally, one can use asynchronous versions of OpenEntry, Record, CloseEntry, i.e. OpenEntryAsynch, RecordAsynch, CloseEntryAsynch. In this case data is stored in a background thread and during this writing Tango Data Server has a state RUNNING.

In order to build the XML configurations in the easy way the authors of the server provide for this purpose a specialized GUI tool, Component Designer. The attached to the server XML examples was created by XMLFile class defined in XMLCreator/simpleXML.py.

From pip

To install it from pip you can

$ python3 -m venv myvenv
$ . myvenv/bin/activate

$ pip install nxswriter

Moreover it is also good to install

$ pip install pytango
$ pip install pymysqldb
$ pip install psycopg2-binary
$ pip install cx-oracle

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

nxswriter-2.25.1.tar.gz (79.6 kB view details)

Uploaded Source

File details

Details for the file nxswriter-2.25.1.tar.gz.

File metadata

  • Download URL: nxswriter-2.25.1.tar.gz
  • Upload date:
  • Size: 79.6 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/1.15.0 pkginfo/1.5.0.1 requests/2.22.0 setuptools/33.1.1 requests-toolbelt/0.9.1 tqdm/4.36.1 CPython/3.5.3

File hashes

Hashes for nxswriter-2.25.1.tar.gz
Algorithm Hash digest
SHA256 95a53a6f7798b7ad88f47e114220ee1c5d6e987e5238d60a0ff3028fad09e8e2
MD5 6446140c6ff7c33667cb14e0aff6a579
BLAKE2b-256 a28e762b7da2c8b2ad5d63a46b5a5b9b6fb3d46078b0f6ac83db1f91621b41a3

See more details on using hashes here.

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page