cli tool for obnizOS setup
obniz_cli is cli tool for obnizOS(for ESP32) install.
pip install obniz_cli
Connect the ESP32 device from the serial port to your PC and check if the PC recognizes the device. The following command shows the list of devices.
python -m serial.tools.list_ports
(You can execute this command after
pip install obniz_cli.)
In most cases, port name is
dev/cu.SLAB_USBtoUART or like
COM3. If you can't find these port or can find but fail to install, you may need USB-driver for devices from here.
obniz_cli flashos [-b] [-p]
You can install obnizOS to your ESP32 device. If you execute without
-p option, it is displayed as follows:
0: /dev/cu.Bluetooth-Incoming-Port 1: /dev/cu.SLAB_USBtoUART Select NUMBER from above list(or if you want to cancel, input N key):
Select the device you want to install. (A device port can be passed to command with
-p option like
obniz_cli flashos -p /dev/cu.SLAB_USBtoUART).
Then, latest obnizOS is downloaded and installed to device. By default, installation is performed at 115200bps but if installation failed, try to decrease it by
obniz_cli flashos -b 115200.
After install, cli automatically change serial mode to set obnizOS configuration
obniz_cli eraseos [-p]
You can reset your device by this command.
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
|Filename, size||File type||Python version||Upload date||Hashes|
|Filename, size obniz_cli-0.0.6-py3-none-any.whl (5.2 kB)||File type Wheel||Python version py3||Upload date||Hashes View|
|Filename, size obniz_cli-0.0.6.tar.gz (3.7 kB)||File type Source||Python version None||Upload date||Hashes View|
Hashes for obniz_cli-0.0.6-py3-none-any.whl