Skip to main content

No project description provided

Project description

Introduction

This project implements the optimization techniques proposed in Improving RNN Transducer Modeling for End-to-End Speech Recognition to reduce the memory consumption for computing transducer loss.

How does it differ from the RNN-T loss from torchaudio

It produces same output as torchaudio for the same input, so optimized_transducer should be equivalent to torchaudio.functional.rnnt_loss().

This project is more memory efficient and potentially faster (TODO: This needs some benchmarks)

Also, torchaudio accepts only output from nn.Linear, but we also support output from log-softmax (You can set the option from_log_softmax to True in this case).

It also supports a modified version of transducer. See below for what the meaning of modified transducer is.

How does it differ from warp-transducer

It borrows the methods of computing alpha and beta from warp-transducer. Therefore, optimized_transducer produces the same alpha and beta as warp-transducer for the same input.

However, warp-transducer produces different gradients for CPU and CUDA when using the same input. See https://github.com/HawkAaron/warp-transducer/issues/93

This project produces consistent gradient on CPU and CUDA for the same input, just like what torchaudio is doing. (We borrow the gradient computation formula from torchaudio).

optimized_transducer uses less memory than that of warp-transducer and is potentially faster. (TODO: This needs some benchmarks).

It also supports a modified version of transducer. See below for what the meaning of modified transducer is.

Modified Transducer

In modified transducer, we limit the maximum number of symbols per frame to 1. The following figure compares the formula for forward and backward procedures between standard transducer and modified transducer.

Note: Modified transducer is proposed independently by @danpovey. We were later informed that the idea already existed in Recurrent Neural Aligner: An Encoder-Decoder Neural Network Model for Sequence to Sequence Mapping

Installation

You can install it via pip:

pip install optimized_transducer

To check that optimized_transducer was installed successfully, please run

python3 -c "import optimized_transducer; print(optimized_transducer.__version__)"

which should print the version of the installed optimized_transducer, e.g., 1.2.

Installation FAQ

What operating systems are supported ?

It has been tested on Ubuntu 18.04. It should also work on macOS and other unixes systems. It may work on Windows, though it is not tested.

How to display installation log ?

Use

pip install --verbose optimized_transducer

How to reduce installation time ?

Use

export OT_MAKE_ARGS="-j"
pip install --verbose optimized_transducer

It will pass -j to make.

Which version of PyTorch is supported ?

It has been tested on PyTorch >= 1.5.0. It may work on PyTorch < 1.5.0

How to install a CPU version of optimized_transducer ?

Use

export OT_CMAKE_ARGS="-DCMAKE_BUILD_TYPE=Release -DOT_WITH_CUDA=OFF"
export OT_MAKE_ARGS="-j"
pip install --verbose optimized_transducer

It will pass -DCMAKE_BUILD_TYPE=Release -DOT_WITH_CUDA=OFF to cmake.

What Python versions are supported ?

Python >= 3.6 is known to work. It may work for Python 2.7, though it is not tested.

Where to get help if I have problems with the installation ?

Please file an issue at https://github.com/csukuangfj/optimized_transducer/issues and describe your problem there.

Usage

optimized_transducer expects that the output shape of the joint network is NOT (N, T, U, V), but is (sum_all_TU, V), which is a concatenation of 2-D tensors: (T_1 * U_1, V), (T_2 * U_2, V), ..., (T_N, U_N, V). Note: (T_1 * U_1, V) is just the reshape of a 3-D tensor (T_1, U_1, V).

Suppose your original joint network looks somewhat like the following:

encoder_out = torch.rand(N, T, D) # from the encoder
decoder_out = torch.rand(N, U, D) # from the decoder, i.e., the prediction network

encoder_out = encoder_out.unsqueeze(2) # Now encoder out is (N, T, 1, D)
decoder_out = decoder_out.unsqueeze(1) # Now decoder out is (N, 1, U, D)

x = encoder_out + decoder_out # x is of shape (N, T, U, D)
activation = torch.tanh(x)

logits = linear(activation) # linear is an instance of `nn.Linear`.

loss = torchaudio.functional.rnnt_loss(
    logits=logits,
    targets=targets,
    logit_lengths=logit_lengths,
    target_lengths=target_lengths,
    blank=blank_id,
    reduction="mean",
)

You need to change it to the following:

encoder_out = torch.rand(N, T, D) # from the encoder
decoder_out = torch.rand(N, U, D) # from the decoder, i.e., the prediction network

encoder_out_list = [encoder_out[i, :logit_lengths[i], :] for i in range(N)]
decoder_out_list = [decoder_out[i, :target_lengths[i]+1, :] for i in range(N)]

x = [e.unsqueeze(1) + d.unsqueeze(0) for e, d in zip(encoder_out_list, decoder_out_list)]
x = [p.reshape(-1, D) for p in x]
x = torch.cat(x)

activation = torch.tanh(x)
logits = linear(activation) # linear is an instance of `nn.Linear`.

loss = optimized_transducer.transducer_loss(
    logits=logits,
    targets=targets,
    logit_lengths=logit_lengths,
    target_lengths=target_lengths,
    blank=blank_id,
    reduction="mean",
    from_log_softmax=False,
)

Caution: We used from_log_softmax=False in the above example since logits is the output of nn.Linear.

Hint: If logits is the output of log-softmax, you should use from_log_softmax=True.

In most cases, you should pass the output of nn.Linear to compute the loss, i.e., use from_log_softmax=False, to save memory.

If you want to do some operations on the output of log-softmax before feeding it to optimized_transducer.transducer_loss(), from_log_softmax=True is helpful in this case. But be aware that this will increase the memory usage.

To use the modified transducer, pass an additional argument one_sym_per_frame=True to optimized_transducer.transducer_loss().

For more usages, please refer to

For developers

As a developer, you don't need to use pip install optimized_transducer. To make development easier, you can use

git clone https://github.com/csukuangfj/optimized_transducer.git
cd optimized_transducer
mkdir build
cd build
cmake -DOT_BUILD_TESTS=ON -DCMAKE_BUILD_TYPE=Release ..
make -j
export PYTHONPATH=$PWD/../optimized_transducer/python:$PWD/lib:$PYTHONPATH

I usually create a file path.sh inside the build directory, containing

export PYTHONPATH=$PWD/../optimized_transducer/python:$PWD/lib:$PYTHONPATH

so what you need to do is

cd optimized_transducer/build
source path.sh

# Then you are ready to run Python tests
python3 optimized_transducer/python/tests/test_compute_transducer_loss.py

# You can also use "import optimized_transducer" in your Python projects

To run all Python tests, use

cd optimized_transducer/build
ctest --output-on-failure

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

optimized_transducer-1.3.tar.gz (47.5 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page