Skip to main content

A command-line program to crop the margins of PDF files, with many options.

Project description

The pdfCropMargins program is a command-line application to automatically crop the margins of PDF files. Cropping the margins can make it easier to read the pages of a PDF document – whether the document is printed or displayed on a screen – because the display fonts are larger. This program is similar to the Perl script pdfcrop except with many more options.

Features

  • Automatically detects the margins and can crop a given percentage of them.

  • Can crop all the pages to the same size to give a uniform appearance (such as in two-up).

  • Works on Linux, Windows, Cygwin, and OS X/Darwin.

  • Has an optional graphical user interface (GUI) for interactive cropping.

  • Works with either MuPDF, the pdftoppm program, or the Ghostscript program.

  • A version of pdftoppm for Windows is included.

  • Renders and analyzes page images to find the bounding boxes, which allows it to deal with noisy scanned PDFs.

  • Can automatically apply a Ghostscript repair operation to attempt to fix corrupt PDF files.

  • A rudimentary ‘undo’ capability is implemented by default.

  • Can crop pages uniformly based on the nth smallest crop values, which helps with noisy images or documents where a few pages have unwanted markings in their margins.

  • Can automatically run a document previewer on the output file.

  • The format of automatically-generated output-file names is easily modifiable.

  • Preserves document catalog information such as outlines if possible.

  • Crops rotated pages according to their appearance in the document viewer.

  • Can deal with at least simple cases of password-encrypted files.

  • Works with Python 3 and Python 2.

This GIF shows the optional GUI, before and after cropping a document:

[GIF of pdfCropMargins]

What’s New

See the CHANGELOG for recent changes and new features.

New in version 1.0.0

  • The new default method for rendering pages to calculate crops uses the Python PyMuPDF package, if it is detected. That package is included in the GUI install but not in the base install. This method works in-memory and tends to be faster. To get the old default behavior (i.e., searching first for pdftoppm and then for Ghostscript) use the option --calcbb o or the shortcut -c o.

  • The new preferred way to select the method of calculating bounding boxes is the option --calcbb or the shortcut -c. The options are:

    • -c d: The default, look for PyMuPDF, pdftoppm, and Ghostscript, in that order.

    • -c m: Force the use of MuPDF (PyMuPDF) rendering.

    • -c p: Force the use of pdftoppm rendering.

    • -c gr: Force the use of Ghostscript rendering (equivalent to --gsRender).

    • -c gb: Use Ghostscript to directly calculate the bounding boxes (equivalent to --gsBbox). This method does not work for scanned documents.

    • -c o: Revert to the old default behavior (pdftoppm then Ghostscript).

    The older method-selection options still work, only the default has changed.

  • The default rendering resolution is now 72 dpi instead of 150 dpi. Resolution can still be set with the -x and -y options.

  • A new option flag --percentText which changes the interpretation of the percentage values passed to --percentRetain and --percentRetain4. With this flag the left and right margins are set to a percentage of the text width (bounding box width) and the top and bottom margins are set to a percentage of the text height.

Installing

The easiest way to install the pdfCropMargins program is by using pip.

The basic features work out of the box with the GUI install, but the default install and some of the options require either the external program pdftoppm or Ghostscript. For information on installing those programs on Linux and Windows, see: Installing pdftoppm and/or Ghostscript .

Note on Python 2 installs: The program still runs and installs on Python 2, but the Pillow dependency will not be automatically installed because the most recent version available for Python 2 has several moderate-severity security vulnerabilities. You can choose to install it yourself via pip install pillow --user; otherwise, only the --bbcalc gb (or --gsBbox) method of calculating crops will work (and Ghostscript is required). For the GUI, PySimpleGUI no longer supports 2.7 but the last version still seems to work.

Linux/Ubuntu

If you are installing via pip with the --user option be sure $HOME/.local/bin is in your system PATH. (To install system-wide without --user the pip3 command below would also need to be run with sudo.)

This is the full install, with the GUI and external utility programs:

sudo apt install python3-pip ghostscript poppler-utils python3-setuptools python3-tk
pip3 install pdfCropMargins[gui] --user --upgrade

Here is the plain install, without the GUI or MuPDF bounding-box calculations. It has fewer dependencies, but it requires that either pdftoppm or Ghostscript be installed. Not all options are available.

sudo apt install python3-pip ghostscript poppler-utils
pip3 install pdfCropMargins --user --upgrade

To get the MuPDF rendering features without the GUI dependencies you can alternately use pdfCropMargins[mupdf] in the above commands.

Troubleshooting: If you have problems with the install of PyMuPDF, the first thing to try is to upgrade your version of the pip program and then retry:

pip3 install pip --upgrade --user

If you still get an error “Failed building wheel for pymupdf” with the GUI install you can try forcing a binary install of pyMuPDF:

pip3 install pdfCropMargins[gui] --user --upgrade --only-binary pymupdf

Windows

The pip program should be automatically installed along with Python. If you cannot find the pip executable you can usually run it like this:

python -m pip <arguments-to-pip>

Note that on some Windows installs the executable for Python is py rather than python.

To install with the GUI use:

pip install pdfCropMargins[gui] --upgrade

The plain install, without the GUI, has fewer dependencies but requires either Ghostscript or pdftoppm to be installed. A version of pdftoppm is supplied for Windows, which will be used as a fallback. To install without the GUI use:

pip install pdfCropMargins --upgrade

In order for the command pdf-crop-margins to work from the command line the bin directory that it is created in (by the pip command) must be on the Windows Path. The system-wide Python bin directory should already be on the path if you checked the box to modify Path when you installed Python; otherwise it should be added. (If you install with the --user option to pip then you need to be sure that the local Python bin directory is in the Windows Path.)

To get the MuPDF rendering features without the GUI dependencies you can alternately use pdfCropMargins[mupdf] in the plain install above.

Running

The program can be run 1) from the command line, 2) from the command line with a GUI, 3) from a Python program, or 3) from the source repo.

Running from the command line

After installation via pip the program can be run with a command such as:

pdf-crop-margins -v -s -u your-file.pdf

That command prints verbose output, forces all pages to be the same size (-s) and then crops each page by the same amount (-u) for a uniform appearance, retaining the default of 10% of the margins. To run the same command with the GUI for fine-tuning, use:

pdf-crop-margins -v -s -u -gui your-file.pdf

For help and to see the many command-line options that are available, run:

pdf-crop-margins -h | more

The full output of that command is also listed below, at the bottom of this page. On Windows you may need to explicitly put the Python distribution’s Scripts directory into your environment PATH in order to avoid having to use the full pathname.

Running with the GUI

To run the GUI, assuming that version of pdfCropMargins has been installed, just pass the -gui flag in addition to any other flags. The program is still a command-line application, and still respects all the flags, but the GUI lets you fine-tune the values of some of the command-line arguments such as the percent to crop, etc. The output filenames, etc., are all the same as for the command-line version. Options modifiable from the GUI are initially set to any values passed in on the command line.

The graphical display shows the effect of each crop when you hit the ‘Crop’ button. Multiple cropping calls for the same document tend to be faster because the PDF pages usually only need to be rendered to images one time.

Python interface

The program can also be called from a user’s Python program (when the pdfCropMargins package is discoverable in the Python path). Just import the crop function and then call it with a list containing the usual command-line arguments as separate items. For example:

from pdfCropMargins import crop
crop(["-p", "20", "-u", "-s", "paper1.pdf"])
crop(["-p", "0", "-gui", "paper2.pdf"])

Any necessary exception handling should be performed by the calling code.

Running from the source distribution

The pdfCropMargins program can be run directly from the source code directory tree, provided the dependencies are installed. Just clone the repo and run the program pdfCropMargins.py located in the bin directory.

To pip install the program and its dependencies from the cloned repo rather than from PyPI just go to the root of the source directory and run pip install .[gui] for the GUI version or pip install . for the non-GUI version. (As usual, for code development use the -e option to make the code editable.)

Getting good crops

  • To diagnose unexpected crops, try running with the -v verbose argument. It will tell you the page with the smallest crop amount for a margin, among other data.

  • Running without the -u or -s options will crop each page separately, so you can see which pages might be causing problems (such as pages with noise near the borders or margin text).

  • To get cropped pages all the same size be sure to use both -s to first make pages the same size and -u to crop each page by the same amount.

  • Sometimes a small pre-crop is needed (-ap or -ap4) to get past small, unwanted markings near the edges of pages.

Documentation

To see the documentation, run:

pdf-crop-margins -h | more

The output of that command follows:

Usage: pdf-crop-margins [-h] [-o OUTFILE_NAME] [-v] [-gui] [-p PCT]
                        [-p4 PCT PCT PCT PCT] [-pt] [-a BP] [-a4 BP BP BP BP]
                        [-ap BP] [-ap4 BP BP BP BP] [-u] [-m INT]
                        [-m4 INT INT INT INT] [-mp INT] [-s] [-ms INT] [-e]
                        [-g PAGESTR] [-c [d|m|p|gr|gb|o]] [-gs] [-gsr]
                        [-t BYTEVAL] [-nb INT] [-ns INT] [-x DPI] [-y DPI]
                        [-b [m|c|t|a|b]] [-f [m|c|t|a|b]] [-r] [-A] [-gsf]
                        [-nc] [-pv PROG] [-mo] [-q] [-nco] [-pf] [-sc STR]
                        [-su STR] [-ss STR] [-pw PASSWD] [-spr FLOAT:FLOAT]
                        [-prw FLOAT FLOAT FLOAT FLOAT] [-dcb STR] [-dcw STR]
                        [-i] [-pdl] [-gsp PATH] [-ppp PATH] [--version]
                        [-wcdf FILEPATH]
                        PDF_FILE [PDF_FILE ...]

Description:

     A command-line application to crop the margins of PDF files. Cropping
     the margins can make it easier to read the pages of a PDF document --
     whether the document is printed or displayed on a screen -- because the
     display fonts are larger. Margin-cropping is also sometimes useful when
     a PDF file is included in a document as a graphic.

     By default 10% of the existing margins will be retained; the rest will
     be eliminated. There are many options which can be set, however,
     including the percentage of existing margins to retain.

     Here is a simple example of cropping a file named document.pdf and
     writing the cropped output-document to a file named
     croppedDocument.pdf:

        pdf-crop-margins document.pdf -o croppedDocument.pdf

     If no destination is provided a filename will be automatically
     generated from the name of the source file (see below).

     The pdfCropMargins program works by changing the page sizes which are
     stored in the PDF file (and are interpreted by programs like Acrobat
     Reader). Both the CropBox and the MediaBox are set to the newly-
     computed cropped size. After this the view of the document in most
     programs will be the new, cropped view.

     In order to reduce the number of copies of a document which must be
     saved, a basic '--restore' option is provided. When cropping a file not
     produced by the pdfCropMargins program the default is to save the
     intersection of the MediaBox and any existing CropBox in the ArtBox.
     This saves the "usual" view of the original document in programs like
     Acrobat Reader. Subsequent crops of a file produced by pdfCropMargins
     do not by default alter the ArtBox. The restore option simply copies
     the saved values back to the MarginBox and CropBox. Note that this
     assumes the ArtBox is unused (it is rarely used, and this feature can
     be turned off with the -A option). So, for example, you can make
     annotations to a file with cropped margins and still produce a version
     with the annotations which viewers display as the original margins.
     Programs which change the "Producer" string in the PDF may interfere
     with this feature.

     Below are several examples using more of the command-line options, each
     applied to an input file called doc.pdf. The output filename is
     unspecified in most of these examples, so the program will
     automatically generate the filename (or an output filename can always
     be explicitly provided with '-o'):

     1) Crop doc.pdf so that all the pages are set to the same size and the
     cropping amount is uniform across all the pages (this gives a nice two-up
     appearance).  The default of retaining 10% of the existing margins is
     used.  Note carefully that '-u' only makes the amount to be cropped uniform
     for each page; if the pages do not have the same size to begin with they
     will not have the same size afterward unless the '-s' option is also used.

        pdf-crop-margins -u -s doc.pdf

     2) Crop each page of doc.pdf individually (i.e., not uniformly), keeping 50%
     of the existing margins.

        pdf-crop-margins -p 50 doc.pdf

     3) Crop doc.pdf uniformly, keeping 50% of the left margin, 20% of the bottom
     margin, 40% of the right margin, and 10% of the top margin.

        pdf-crop-margins -u -p4 50 20 40 10 doc.pdf

     4) Crop doc.pdf retaining 20% of the margins, and then reduce the right page
     margins only by an absolute 12 points.

        pdf-crop-margins -p 20 -a4 0 0 12 0 doc.pdf

     5) Add a constant 5bp around the bare bounding boxes on all pages (note the
     negative value passed to the `-a` option, which adds space rather than
     removing it).

        pdf-crop-margins -p 0 -a -5 doc.pdf

     6) Pre-crop the document by 5bp on each side before computing the bounding
     boxes.  Then crop retaining 50% of the computed margins.  This can be
     useful for difficult documents such as scanned books with page-edge noise
     or other "features" inside the current margins.

        pdf-crop-margins -ap 5 -p 50 doc.pdf

     7) Crop doc.pdf, re-naming the cropped output file doc.pdf and backing
     up the original file in a file named backup_doc.pdf.

        pdf-crop-margins -mo -pf -su "backup" doc.pdf

     8) Crop the margins of doc.pdf to 120% of their original size, increasing
     the margins.  Use Ghostscript to find the bounding boxes without explicit
     rendering by pdfCropMargins.

        pdf-crop-margins -p 120 -c gb doc.pdf

     9) Crop the margins of doc.pdf ignoring the 10 largest margins on each edge
     (over the whole document).  This is especially good for noisy documents
     where all the pages have very similar margins, or when you want to ignore
     marginal annotations which only occur on a few pages.

        pdf-crop-margins -m 10 doc.pdf

     10) Crop doc.pdf, launch the acroread viewer on the cropped output, and then
     query as to whether or not to rename the cropped file doc.pdf and back up
     the original file as doc_uncropped.pdf.

        pdf-crop-margins -mo -q doc.pdf

     11) Crop pages 1-100 of doc.pdf, cropping all even pages uniformly and all odd
     pages uniformly.

        pdf-crop-margins -g 1-100 -e doc.pdf

     12) Try to restore doc.pdf to its original margins, assuming it was cropped
     with pdfCropMargins previously.  Note that the default output filename is
     still named doc_cropped.pdf, even though it is the recovered file.  Use the
     '-mo' option to modify doc.pdf and backup the previous version.

        pdf-crop-margins -r doc.pdf

     There are many different ways to use this program. After finding a
     method which works well for a particular task or workflow pattern it is
     often convenient to make a simple shell script (batch file) which
     invokes the program with those particular options and settings. Simple
     template scripts for Bash and Windows are packaged with the program, in
     the bin directory. The program can also be called from a user's Python
     program (when discoverable in the Python path) by using code such as

        from pdfCropMargins import crop
        crop(["-p", "20", "-u", "-s", "paper.pdf"])

     When printing a document with closely-cropped pages it may be necessary
     to use options such as "Fit to Printable Area". It may also be
     necessary to fine-tune the size of the retained margins if the edges of
     the text are being cut off.

     Sometimes a PDF file is corrupted or non-standard to the point where
     the routines used by this program raise an error and exit. In that case
     it can sometimes help to repair the PDF file before attempting to crop
     it. If it is readable by Ghostscript then the following command will
     often repair it sufficiently:

        gs -o repaired.pdf -sDEVICE=pdfwrite -dPDFSETTINGS=/prepress corrupted.pdf

     This command can also be used to convert some PostScript (.ps) files to
     PDF. The option '--gsFix' (or '-gsf') will automatically attempt to
     apply this fix, provided Ghostscript is available. See the description
     of that option for more information.

     The pdfCropMargins program handles rotated pages (such as pages in
     landscape mode versus portrait mode) as follows. All rotated pages are
     un-rotated as soon as they are read in. All the cropping is then
     calculated. Finally, as the crops are applied to the pages, the
     rotation is re-applied. This may give unexpected results in documents
     which mix pages at different rotations, especially with the '--uniform'
     or '--samePageSize' options. For rotated pages the arguments of all the
     options which take four arguments, one for each margin, are shifted so
     the left, bottom, right, and top margins correspond to the screen
     appearance (regardless of any internal rotation).

     All the command-line options to pdfCropMargins are described below. The
     following definition is useful in precisely defining what several of
     the options do. The "delta values" are the absolute reduction lengths,
     in points, which are applied to each original page to get the final
     cropped page. There is a delta value for each margin, on each page. In
     the usual case where all the margin sizes decrease, all the deltas are
     positive. A delta value can, however, be negative (e.g., when
     percentRetain > 100 or when a negative absolute offset is used). When a
     delta value is negative the corresponding margin size will increase.


Positional arguments:

  PDF_FILE     The pathname of the PDF file to crop. Use quotes around any
               file or directory name which contains a space. If no filename
               is given for the cropped PDF output file via the '-o' flag then
               a default output filename will be generated. By default it is
               the same as the source filename except that the suffix ".pdf"
               is replaced by "_cropped.pdf", overwriting by default if the
               file already exists. The file will be written to the working
               directory at the time when the program was run. If the input
               file has no extension or has an extension other than '.pdf' or
               '.PDF' then the suffix '.pdf' will be appended to the existing
               (possibly-null) extension. Globbing of wildcards is performed
               on Windows systems.


Optional arguments:

  -h, --help   Show this help message and exit.

  -o OUTFILE_NAME, --outfile OUTFILE_NAME
               An optional argument specifying the pathname of a file that the
               cropped output document should be written to. By default any
               existing file with the same name will be silently overwritten.
               If this option is not given the program will generate an output
               filename from the input filename. (By default "_cropped" is
               appended to the input filename before the file extension. If
               the extension is not '.pdf' or '.PDF' then '.pdf' is appended
               to the extension). Globbing of wildcards is performed on
               Windows systems.

  -v, --verbose
               Print more information about the program's actions and
               progress. Without this switch only warning and error messages
               are printed to the screen.

  -gui, --gui  Run the graphical user interface. This mode allows you to
               interactively preview and test different cropping options
               without having to recalculate the bounding boxes each time
               (which can be slow). All the usual command-line options to the
               program are still respected. Clicking the 'Crop' button in the
               GUI crops with the current settings, writing out a cropped PDF
               file to the same filename that the command-line version would
               write to. Note that successive changes to the margins in the
               GUI are not cumulative: settings are always applied to the
               original document as it was passed in to the program. The
               'Original' button reverts the display back to that original
               version.

  -p PCT, --percentRetain PCT
               Set the percent of margin space to retain in the image. This is
               a percentage of the original margin space. By default the
               percent value is set to 10. Setting the percentage to 0 gives a
               tight bounding box. Percent values greater than 100 increase
               the margin sizes from their original sizes, and negative values
               decrease the margins even more than a tight bounding box.

  -p4 PCT PCT PCT PCT, -pppp PCT PCT PCT PCT, --percentRetain4 PCT PCT PCT PCT
               Set the percent of margin space to retain in the image,
               individually for the left, bottom, right, and top margins,
               respectively. The four arguments should be percent values.

  -pt, --percentText
               Normally the percentage values passed to '--percentRetain' or '
               --percentRetain4' define the percentage of existing margins to
               retain. This flag alters the interpretation of those percent
               values. The margins are instead set to the given percentage of
               the text width or height. The left and right margins are set to
               a percentage of the bounding box width and the bottom and top
               margins are set to a percentage of the bounding box height.

  -a BP, --absoluteOffset BP
               Decrease each margin size by an absolute floating point offset
               value, to be subtracted from each margin's size after the
               'percentRetain' option is applied. The units are big points,
               bp, which is the unit used in PDF files. There are 72 bp in an
               inch. A single bp is approximately equal to a TeX point, pt
               (with 72.27pt in an inch). Negative values are allowed;
               positive numbers always decrease the margin size and negative
               numbers always increase it. Absolute offsets are always applied
               after any percentage change operations.

  -a4 BP BP BP BP, -aaaa BP BP BP BP, --absoluteOffset4 BP BP BP BP
               Decrease the margin sizes individually with four absolute
               offset values. The four floating point arguments should be the
               left, bottom, right, and top offset values, respectively. See
               the '--absoluteOffset' option for information on the units.

  -ap BP, --absolutePreCrop BP
               This option is like '--absoluteOffset' except that it is
               applied before any bounding box calculations (or any other
               operations). The argument is the same, in units of bp. All
               successive operations are then relative to this pre-crop box,
               considered to be the full-page box. Note that since this
               absolute crop is applied before any bounding boxes are computed
               it is relative to the original full-page boxes of the document
               (unlike 'absoluteOffset', which is a crop relative to the
               newly-cropped margin after 'percentRetain' is applied). As a
               consequence, the number of points may need to be larger than
               what would work for 'absoluteOffset'. This option can be used
               to ignore text and markings out at the edge of the margins by
               cropping it out before the bounding boxes are calculated.

  -ap4 BP BP BP BP, --absolutePreCrop4 BP BP BP BP
               This is the same as '--absolutePreCrop' except that four
               separate arguments can be given. The four floating point
               arguments should be the left, bottom, right, and top absolute
               pre-crop values, respectively.

  -u, --uniform
               Crop all the pages uniformly. This forces the magnitude of
               margin-cropping (absolute, not relative) to be the same on each
               page. This option is applied after all the delta values have
               been calculated for each page, individually. Then all the left-
               margin delta values, for each page, are set to the smallest
               left-margin delta value over every page. The bottom, right, and
               top margins are processed similarly. Note that this effectively
               adds some margin space (relative to the margins obtained by
               cropping pages individually) to some of the pages. If the pages
               of the original document are all the same size then the cropped
               pages will again all be the same size. The '--samePageSize'
               option can be used in combination with this option to force all
               pages to be the same size after cropping.

  -m INT, --uniformOrderStat INT
               Choosing this option implies the '--uniform' option, but the
               smallest delta value over all the pages is no longer chosen.
               Instead, for each margin the nth smallest delta value (with n
               numbered starting at zero) is chosen over all the pages. The
               argument is the integer n, for example '-m 4'. Choosing n to be
               half the number of pages gives the median delta value. This
               option is useful for cropping noisy scanned PDFs which have a
               common margin size on most of the pages, or for ignoring
               annotations which only appear in the margins of a few pages.
               This option essentially causes the program to ignores the n
               largest tight-crop margins when computing common delta values
               over all the pages. Increasing n always either increases the
               cropping amount or leaves it unchanged. Some trial-and-error
               may be needed to choose the best number. Using '-m 1' tends to
               work well with arXiv papers (which have a date in the margin of
               the first page).

  -m4 INT INT INT INT, -mmmm INT INT INT INT, --uniformOrderStat4 INT INT INT INT
               This option is the same as '--uniformOrderStat' (or '-m')
               except that separate values are specified for each margin
               individually. The margins are ordered as left, bottom, right,
               and top.

  -mp INT, --uniformOrderPercent INT
               This option is the same as '--uniformOrderStat' except that the
               order number n is automatically set to a given percentage of
               the number of pages which are set to be cropped (either the
               full number or the ones set with '--pages'). This option
               overrides '--uniformOrderStat' if both are set. The argument is
               a float percent value; rounding is done to get the final order-
               number. Setting the percent to 0 is equivalent to n=1, setting
               the percent to 100 is equivalent to setting n to the full
               number of pages, and setting the percent to 50 gives the median
               (for odd numbers of pages).

  -s, --samePageSize
               Set all the page sizes to be equal. This option only has an
               effect when the page sizes are different. The pages sizes are
               set to the size of the union of all the page regions, i.e., to
               the smallest bounding box which contains all the pages. This
               operation is always done before any others (except '--
               absolutePreCrop'). The cropping is then done as usual, but note
               that any margin percentages (such as for '--percentRetain') are
               now relative to this new, possibly larger, page size. The
               resulting pages are still cropped independently by default, and
               will not necessarily all have the same size unless '--uniform'
               is also selected to force the cropping amounts to be the same
               for each page. If pages are selected with '--pages' then this
               option is only applied to those selected pages.

  -ms INT, --samePageSizeOrderStat INT
               Choosing this option implies the '--samePageSize' option, but
               the calculations for each edge of the smallest bounding box
               ignore the largest (or smallest for left and bottom edges) n
               values. The argument is the nonnegative number n. Each edge is
               calculated independently. This is an order statistic for
               selecting the uniform size to make the pages. Note that this
               will cut off parts of some pages if n>0.

  -e, --evenodd
               Crop all the odd pages uniformly, and all the even pages
               uniformly. The largest amount of cropping that works for all
               the pages in each group is chosen. If the '--uniform' ('-u')
               option is simultaneously set then the vertical cropping will be
               uniform over all the pages and only the horizontal cropping
               will differ between even and odd pages.

  -g PAGESTR, -pg PAGESTR, --pages PAGESTR
               Apply the cropping operation only to the selected pages. The
               argument should be a list of the usual form such as
               "2-4,5,9,20-30". The page-numbering is assumed to start at 1.
               Ordering in the argument list is unimportant, negative ranges
               are ignored, and pages falling outside the document are
               ignored. Note that restore information is always saved for all
               the pages (in the ArtBox) unless '--noundosave' is selected.

  -c [d|m|p|gr|gb|o], --calcbb [d|m|p|gr|gb|o]
               Choose the method to calculate bounding boxes (or to render the
               PDF pages in order to calculate the boxes). The default option
               'd' will choose the MuPDF rendering option if the PyMuPDF
               dependency is installed, otherwise it will use pdftoppm
               rendering or Ghostscript rendering, in that order, if the
               external programs can be located. The options to force a
               particular method are MuPDF ('m'), pdftoppm ('p'), or
               Ghostscript ('gr') for rendering, or direct Ghostscript
               bounding-box calculation ('gb'). For pdftoppm or Ghostscript
               options the corresponding program must be installed and
               locatable (see the path-setting options below if the default
               locator fails). Only the explicit rendering methods will work
               for scanned pages (see '--gsBbox'). Choosing 'o' reverts to the
               old default behavior of first looking for pdftoppm and then
               looking for Ghostscript for rendering.

  -gs, --gsBbox
               This option is maintained for backward compatibility; using '-c
               gb' is now preferred. Use Ghostscript to directly find the
               bounding boxes for the pages, with no explict rendering of the
               pages. (The default is to explicitly render the PDF pages to
               image files and calculate bounding boxes from the images.) This
               method tends to be much faster, but it does not work with
               scanned PDF documents. It also does not allow for choosing the
               threshold value, applying blurs, etc. Any resolution options
               are passed to the Ghostscript bbox device. This option requires
               that Ghostscript be available in the PATH as "gswin32c.exe" or
               "gswin64c.exe" on Windows, or as "gs" on Linux. When this
               option is set the Pillow image library for Python is not
               required.

  -gsr, --gsRender
               This is maintained for backward compatibility; using '-c gr' is
               now preferred. Use Ghostscript to render the PDF pages to
               images. By default the pdftoppm program will be preferred for
               the rendering, if it is found. Note that this option has no
               effect if '--gsBbox' is chosen, since then no explicit
               rendering is done.

  -t BYTEVAL, --threshold BYTEVAL
               Set the threshold for determining what is background space
               (white). The value can be from 0 to 255, with 191 the default
               (75 percent). This option may not be available for some
               configurations since the PDF must be internally rendered as an
               image of pixels. In particular, it is ignored when '--gsBbox'
               is selected. Any pixel value over the threshold is considered
               to be background (white), and any value below it is considered
               to be text (black). Lowering the value should tend to make the
               bounding boxes smaller. The threshold may need to be lowered,
               for example, for scanned images with greyish backgrounds. For
               pages with dark backgrounds and light text a negative threshold
               value can be used. In that case the absolute value is used as
               the threshold but the test is reversed to consider pixel values
               greater than or equal to the threshold to be background.

  -nb INT, --numBlurs INT
               When PDF files are explicitly rendered to image files, apply a
               blur operation to the resulting images this many times. This
               can be useful for noisy images.

  -ns INT, --numSmooths INT
               When PDF files are explicitly rendered to image files, apply a
               smoothing operation to the resulting images this many times.
               This can be useful for noisy images.

  -x DPI, --resX DPI
               The x-resolution in dots per inch to use when the image is
               rendered to find the bounding boxes. The default is 150. Higher
               values produce more precise bounding boxes but require more
               time and memory.

  -y DPI, --resY DPI
               The y-resolution in dots per inch to use when the image is
               rendered to find the bounding boxes. The default is 150. Higher
               values produce more precise bounding boxes but require more
               time and memory.

  -b [m|c|t|a|b], --boxesToSet [m|c|t|a|b]
               By default the pdfCropMargins program sets both the MediaBox
               and the CropBox for each page of the cropped PDF document to
               the new, cropped page size. This default setting is usually
               sufficient, but this option can be used to select different PDF
               boxes to set. The option takes one argument, which is the first
               letter (lowercase) of a type of box. The choices are MediaBox
               (m), CropBox (c), TrimBox (t), ArtBox (a), and BleedBox (b).
               This option overrides the default and can be repeated multiple
               times to set several box types.

  -f [m|c|t|a|b], --fullPageBox [m|c|t|a|b]
               By default the program first (before any cropping is
               calculated) sets the MediaBox and CropBox of each page in (a
               copy of) the document to the intersection of its previous
               MediaBox and CropBox. This ensures that the cropping is
               relative to the usual document-view in programs like Acrobat
               Reader. This essentially defines what is assumed to be the full
               size of pages in the document, and all cropping is then
               performed relative to that full-page size. This option can be
               used to alternately use the MediaBox, the CropBox, the TrimBox,
               the ArtBox, or the BleedBox in defining the full-page size. The
               option takes one argument, which is the first letter
               (lowercase) of the type of box to use. If the option is
               repeated then the intersection of all the box arguments is
               used. Only one choice is allowed in combination with the '-gs'
               option since Ghostscript does its own internal rendering when
               finding bounding boxes. The default with '-gs' is the
               CropBox.

  -r, --restore
               This is a simple undo operation which essentially undoes all
               the crops ever made by pdfCropMargins and returns to the
               original margins (provided no other program modified the
               Producer metadata or ArtBoxes). By default, whenever this
               program crops a file for the first time it saves the MediaBox
               intersected with the CropBox as the new ArtBox (since the
               ArtBox is rarely used). The Producer metadata is checked to see
               if this was the first time. If so, the ArtBox for each page is
               simply copied to the MediaBox and the CropBox for the page.
               This restores the earlier view of the document, such as in
               Acrobat Reader (but does not completely restore the previous
               condition in cases where the MediaBox and CropBox differed or
               the ArtBox had a previous value). Any options such as '-u',
               '-p', and '-a' which do not make sense in a restore operation
               are ignored. Note that as far as default filenames the
               operation is treated as just another crop operation (the
               default-generated output filename still has a "_cropped.pdf"
               suffix). The '--modifyOriginal' option (or its query variant)
               can be used with this option. Saving in the ArtBoxes can be
               disabled by using the '--noundosave' option.

  -A, --noundosave
               Do not save any restore data in the ArtBox. This option will
               need to be selected if the document actually uses the ArtBox
               for anything important (which is rare). Note that the '--
               restore' operation will not work correctly for the cropped
               document if this option is included in the cropping command.
               (The program does not currently check for this when doing a
               restore.)

  -gsf, --gsFix
               Attempt to repair the input PDF file with Ghostscript before it
               is read-in with PyPdf. This requires that Ghostscript be
               available. (See the general description text above for the
               actual command that is run.) This can also be used to
               automatically convert some PostScript files (.ps) to PDF for
               cropping. The repaired PDF is written to a temporary file; the
               original PDF file is not modified. The original filename is
               treated as usual as far as automatic name-generation, the '--
               modify-original' option, and so forth. This option is often
               helpful if the program hangs or raises an error due to a
               corrupted PDF file. Note that when re-cropping a file already
               cropped by pdfCropMargins this option is probably not
               necessary, and if it is used in a re-crop (at least with
               current versions of Ghostscript) it will reset the Producer
               metadata which the pdfCropMargins program uses to tell if the
               file was already cropped by the program (so the '--restore'
               option will not work in combination with this option). This
               option is not recommended as something to use by default unless
               you encounter many corrupted PDF files and do not need to
               restore back to the original margins.

  -nc, --noclobber
               Never overwrite an existing file as the output file.

  -pv PROG, --preview PROG
               Run a PDF viewer on the cropped PDF output. The viewer process
               is run in the background. The viewer is launched after
               pdfCropMargins has finished all the other options. The only
               exception is when the '--queryModifyOriginal' option is also
               selected. In that case the viewer is launched before the query
               so that the user can look at the output before deciding whether
               or not to modify the original. (Note that answering 'y' will
               then move the file out from under the running viewer; close and
               re-open the file before adding annotations, highlighting, etc.)
               The single argument should be the path of the executable file
               or script to run the chosen viewer. The viewer is assumed to
               take exactly one argument, a PDF filename. For example, on
               Linux the Acrobat Reader could be chosen with /usr/bin/acroread
               or, if it is in the PATH, simply acroread. A shell script or
               batch file wrapper can be used to set any additional options
               for the viewer.

  -mo, --modifyOriginal
               This option moves (renames) the original file to a backup
               filename and then moves the cropped file to the original
               filename. Thus it effectively modifies the original file and
               makes a backup copy of the original, unmodified file. The
               backup filename for the original document is always generated
               from the original filename; any prefix or suffix which would be
               added by the program to generate a filename (by default a
               "_cropped" suffix) is modified accordingly (by default to
               "_uncropped"). The '--usePrefix', '--stringUncropped', and '--
               stringSeparator' options can all be used to customize the
               generated backup filename. This operation is performed last, so
               if a previous operation fails the original document will be
               unchanged. Be warned that running pdfCropMargins twice on the
               same source filename will modify the original file; the
               '-noclobberOriginal' option can be used to avoid this.

  -q, --queryModifyOriginal
               This option selects the '--modifyOriginal' option, but queries
               the user about whether to actually do the final move operation.
               This works well with the '--preview' option: if the preview
               looks good you can opt to modify the original file (keeping a
               copy of the original). If you decline then the files are not
               swapped (and are just as if the '--modifyOriginal' option had
               not been set).

  -nco, --noclobberOriginal
               If the '--modifyOriginal' option is selected, do not ever
               overwrite an existing file as the backup copy for the original
               file. This essentially does the move operations for the '--
               modifyOriginal' option in noclobber mode, and prints a warning
               if it fails. On failure the result is exactly as if the '--
               modifyOriginal' option had not been selected. This option is
               redundant if the ordinary '--noclobber' option is also set.

  -pf, --usePrefix
               Prepend a prefix-string when generating default file names
               rather than appending a suffix-string. The same string value is
               used, either the default or the one set via the '--
               stringCropped' or '--stringUncropped' option. With the default
               values for the other options and no output file specified, this
               option causes the cropped output for the input file
               "document.pdf" to be written to the file named
               "cropped_document.pdf" (instead of to the default filename
               "document_cropped.pdf").

  -sc STR, --stringCropped STR
               This option can be used to set the string which will be
               appended (or prepended) to the document filename when
               automatically generating the output filename for a cropped
               file. The default value is "cropped".

  -su STR, --stringUncropped STR
               This option can be used to set the string which will be
               appended (or prepended) to the document filename when
               automatically generating the output filename for the original,
               uncropped file. The default value is "uncropped".

  -ss STR, --stringSeparator STR
               This option can be used to set the separator string which will
               be used when appending or prependeding string values to
               automatically generate filenames. The default value is "_".

  -pw PASSWD, --password PASSWD
               Specify a password to be used to decrypt an encrypted PDF file.
               Note that decrypting with an empty password is always tried, so
               this option is only needed for non-empty passwords. The
               resulting cropped file will not be encrypted, so use caution if
               important data is involved.

  -spr FLOAT:FLOAT, --setPageRatios FLOAT:FLOAT
               Force all the cropped page ratios to equal the given ratio. All
               crops are calculated and applied as usual, but either the left
               and right margins will be increased equally or else the top and
               bottom margins will be increased equally in order to make the
               ratio of width to height equal the set value. Margins are only
               ever increased. The format for the ratio is either a string
               width-to-height ratio such as '4.5:3' or else a floating point
               number like '0.75' which is the width divided by the height.
               This option can be useful in some PDF viewers.

  -prw FLOAT FLOAT FLOAT FLOAT, --pageRatioWeights FLOAT FLOAT FLOAT FLOAT
               This option weights any whitespace added by the '--
               setPageRatios' argument. It takes four weight arguments, one
               per margin. The four floating point arguments should be the
               left, bottom, right, and top weights, respectively. The weights
               determine what proportion of the total height(width) increase
               necessary to achieve the target page ratio is added to the
               corresponding margin. All weights must be greater than zero.

  -dcb STR, --docCatBlacklist STR
               Data associated with the full document, such as outlines,
               bookmarks, and modes, is saved in the document catalog of the
               PDF file. By default it is all copied over to the cropped
               document if possible (with some exceptions, e.g., "/Pages" will
               be modified by cropping). If this is not wanted, or if it
               causes problems for a document, this option specifies a
               blacklist of document catalog items that will never be copied.
               The arguments should be passed as a single, quoted, whitespace-
               separated string, for example "/Outlines /PageMode
               /OpenAction". The special value "ALL" blacklists everything. An
               empty string blacklists nothing, and is the default. As an
               example, it can be useful to blacklist "/OpenAction" if on
               opening the PDF it does something like zooming which is not
               desired. Blacklisting `/PageMode` can also be useful to, for
               example, not open the outline by default. Running in verbose
               mode '-v' will show which document catalog items are and are
               not being copied for a document.

  -dcw STR, --docCatWhitelist STR
               See the '--docCatBlacklist' option. This is just a whitelist
               that essentially works the same way. The whitelist takes
               precedence over the blacklist. It specifies a list of items
               which will always be copied over even if they are in the
               blacklist. Useful combined with setting the blacklist to "ALL"
               if you only want one or two of the items. The default value is
               the empty string, which whitelists nothing and so only the
               blacklist is used. Setting to "ALL" guarantees that everything
               possible is copied over.

  -i, --showImages
               When explicitly rendering PDF files to image files, display the
               inverse image files that are used to find the bounding boxes.
               Useful for debugging and for choosing some of the other
               parameters (such as the threshold). This option requires a
               default external viewer program selected by the Pillow image
               manipulation package (xv on Unix, and usually Paint on
               Windows).

  -pdl, --pdftoppmLocal
               Use a locally-packaged pdftoppm executable rather than the
               system version. This option is only available on Windows
               machines; it is ignored otherwise. By default the first
               pdftoppm executable found in the directories in the PATH
               environment variable is used. On Windows the program will
               revert to this option if PDF image-rendering is required,
               PyMuPDF is not installed, and no system pdftoppm or Ghostscript
               executable can be found.

  -gsp PATH, --ghostscriptPath PATH
               Pass in a pathname to the ghostscript executable that the
               program should use. No globbing is done. Useful when the
               program is in a nonstandard location.

  -ppp PATH, --pdftoppmPath PATH
               Pass in a pathname to the pdftoppm executable that the program
               should use. No globbing is done. Useful when the program is in
               a nonstandard location.

  --version    Return the pdfCropMargins version number and exit immediately.
               All other options are ignored.

  -wcdf FILEPATH, --writeCropDataToFile FILEPATH
               Write out the calculated list of crops to the file with the
               file pathname that is passed in and exit. Mostly used for
               automated testing and debugging.


The pdfCropMargins program is Copyright (c) 2014 by Allen Barker.
Released under the GNU GPL license, version 3 or later.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

pdfCropMargins-1.0.7.tar.gz (1.8 MB view details)

Uploaded Source

File details

Details for the file pdfCropMargins-1.0.7.tar.gz.

File metadata

  • Download URL: pdfCropMargins-1.0.7.tar.gz
  • Upload date:
  • Size: 1.8 MB
  • Tags: Source
  • Uploaded using Trusted Publishing? No
  • Uploaded via: Python-urllib/3.8

File hashes

Hashes for pdfCropMargins-1.0.7.tar.gz
Algorithm Hash digest
SHA256 666544855417b595ac23d23c120d8775e37df8f2a2535889edecfb5049380cbb
MD5 c390778c7ad5150dc8560a8bfc0d7db4
BLAKE2b-256 453ffe13f960ed7833d1b9eb54f60ec049ac503016ae341f89325c0d06792bae

See more details on using hashes here.

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page