pi-anwing-webthing 0.1.2

A web connected patio awnings controller on Raspberry Pi

pi_anwing_webthing

A web connected patio awnings controller on Raspberry Pi

Currently supported are TB6612FNG driven motors such as DGO-3512ADA. The concrete motor configuration(s) are defined by using a config file such s shown below.

# name, gpio_forward, gpio_backward, step_duration_in_sec
lane1, 2, 3, 0.5
lane2, 19, 26, 0.5
lane3, 5, 6, 0.5
lane4, 10, 9, 0.5

For TB6612FNG driven motors the filename has to include the term tb6612fng such as tb6612fng_motors.config. Regarding the hardware setup and wiring please refer example hardware setup

To install this software you may use PIP package manager such as shown below

sudo pip install pi-anwing-webthing

After this installation you may start the webthing http endpoint inside your python code or via command line using

sudo anwing --command listen --port 9500 --filename /etc/anwing/tb6612fng_motors.config 

Here, the webthing API will be bind to the local port 9500

Alternatively to the listen command, you can use the register command to register and start the webthing service as systemd unit. By doing this the webthing service will be started automatically on boot. Starting the server manually using the listen command is no longer necessary.

sudo anwing --command register --port 9500 --filename /etc/anwing/tb6612fng_motors.config 

The anwing service exposes an http webthing endpoint supporting the anwing properties. E.g.

# webthing has been started on host 192.168.0.23

curl http://192.168.0.23:9500/properties 

{
 [
    {
       "id":"urn:dev:ops:anwing-TB6612FNG",
       "title":"AnwingControl",
       "@context":"https://iot.mozilla.org/schemas",
       "properties":{
          "target_position":{
             "@type":"LevelProperty",
             "title":"awning lane1 target position",
             "type":"integer",
             "minimum":0,
             "maximum":100,
             "description":"awning lane1 target position",
             "links":[
                {
                   "rel":"property",
                   "href":"/0/properties/target_position"
                }
             ]
          },
          "current_position":{
             "@type":"LevelProperty",
             "title":"awning lane1 current position",
             "type":"integer",
             "minimum":0,
             "maximum":100,
             "readOnly":true,
             "description":"awning lane1 current position",
             "links":[
                {
                   "rel":"property",
                   "href":"/0/properties/current_position"
                }
             ]
          },
          "retracting":{
             "@type":"OnOffProperty",
             "title":"lane1 is retracting",
             "type":"boolean",
             "readOnly":true,
             "description":"lane1 is retracting",
             "links":[
                {
                   "rel":"property",
                   "href":"/0/properties/retracting"
                }
             ]
          },
          "extending":{
             "@type":"OnOffProperty",
             "title":"lane1 is extending",
             "type":"boolean",
             "readOnly":true,
             "description":"lane1 is extending",
             "links":[
                {
                   "rel":"property",
                   "href":"/0/properties/extending"
                }
             ]
          }
       },
       "actions":{

       },
       "events":{

       },
       "links":[
          {
             "rel":"properties",
             "href":"/0/properties"
          },
          {
             "rel":"actions",
             "href":"/0/actions"
          },
          {
             "rel":"events",
             "href":"/0/events"
          },
          {
             "rel":"alternate",
             "href":"ws://192.168.0.23:9500/0"
          }
       ],
       "description":"A web connected patio awnings controller on Raspberry Pi",
       "@type":[
          "MultiLevelSensor"
       ],
       "href":"/0",
       "base":"http://192.168.0.23:9500/0",
       "securityDefinitions":{
          "nosec_sc":{
             "scheme":"nosec"
          }
       },
       "security":"nosec_sc"
    },
    ...
 ]
}