pigrometer 0.7

An app for capturing temperature/humidity readings on a raspberrry pi and displaying the information through a web interface

Raspberry Pi Temperature and Humidity

This app can be used to measure temperature and humidity with a DHT11 or DHT22 sensor connected to your raspberry pi.

Usage

Install on your raspberry pi with the command pip install pigrometer and connect a DHT11/DHT22 sensor to your raspberrry pi on port GPIO 4. You can then run the app with python -m pigrometer. After starting the app you should be able to connect to the server at http://<raspberry_pi_ip>:5000 on your local network.

To change which DHT sensor you're using or which pin you want to connect it to, run with --dht-version or --dht-pin set. --dht-version can be set to either 'DHT11' or 'DHT22'. For possible pin names see this circuit python guide. For other options type --help.

To change the amount of data shown on the chart add params to the url ?granularity=900&history=3 where granularity is the number of seconds between points on the graph and history is the number of days to display.

Upcoming features

• More readable timestamps at the bottom of the chart
• Better logging
• More features in the web ui, ability to easily set time range and granularity
• Ability to download data .csv with data from the web ui

Feel free to create an issue if you run into any problems, or if there's any features you think would be a nice addition. Contributions are welcome as well.