This module can be used to create high-quality, presentation-ready X-Y graphs quickly and easily
Project description
Description
This module can be used to create high-quality, presentation-ready X-Y graphs quickly and easily
Class hierarchy
The properties of the graph (figure in Matplotlib parlance) are defined in an object of the pplot.Figure class.
Each figure can have one or more panels, whose properties are defined by objects of the pplot.Panel class. Panels are arranged vertically in the figure and share the same independent axis. The limits of the independent axis of the figure result from the union of the limits of the independent axis of all the panels. The independent axis is shown by default in the bottom-most panel although it can be configured to be in any panel or panels.
Each panel can have one or more data series, whose properties are defined by objects of the pplot.Series class. A series can be associated with either the primary or secondary dependent axis of the panel. The limits of the primary and secondary dependent axis of the panel result from the union of the primary and secondary dependent data points of all the series associated with each axis. The primary axis is shown on the left of the panel and the secondary axis is shown on the right of the panel. Axes can be linear or logarithmic.
The data for a series is defined by a source. Two data sources are provided:
the pplot.BasicSource class provides basic data validation
and minimum/maximum independent variable range bounding. The
pplot.CsvSource class builds upon the functionality of the
pplot.BasicSource class and offers a simple way of accessing
data from a comma-separated values (CSV) file. Other data sources can be
programmed by inheriting from the pplot.functions.DataSource
abstract base class (ABC). The custom data source needs to implement the
following methods: __str__
, _set_indep_var
and
_set_dep_var
. The latter two methods set the contents of the
independent variable (an increasing real Numpy vector) and the dependent
variable (a real Numpy vector) of the source, respectively.
Axes tick marks
Axes tick marks are selected so as to create the most readable graph. Two global variables control the actual number of ticks, pplot.constants.MIN_TICKS and pplot.constants.SUGGESTED_MAX_TICKS. In general the number of ticks are between these two bounds; one or two more ticks can be present if a data series uses interpolation and the interpolated curve goes above (below) the largest (smallest) data point. Tick spacing is chosen so as to have the most number of data points “on grid”. Engineering notation (i.e. 1K = 1000, 1m = 0.001, etc.) is used for the axis tick marks.
Example
# plot_example_1.py
from __future__ import print_function
import os, sys, numpy, pplot
def main(fname, no_print):
"""
Example of how to use the pplot library
to generate presentation-quality plots
"""
###
# Series definition (Series class)
###
# Extract data from a comma-separated (csv)
# file using the CsvSource class
wdir = os.path.dirname(__file__)
csv_file = os.path.join(wdir, 'data.csv')
series1_obj = [pplot.Series(
data_source=pplot.CsvSource(
fname=csv_file,
rfilter={'value1':1},
indep_col_label='value2',
dep_col_label='value3',
indep_min=None,
indep_max=None,
fproc=series1_proc_func,
fproc_eargs={'xoffset':1e-3}
),
label='Source 1',
color='k',
marker='o',
interp='CUBIC',
line_style='-',
secondary_axis=False
)]
# Literal data can be used with the BasicSource class
series2_obj = [pplot.Series(
data_source=pplot.BasicSource(
indep_var=numpy.array([0e-3, 1e-3, 2e-3]),
dep_var=numpy.array([4, 7, 8]),
),
label='Source 2',
color='r',
marker='s',
interp='STRAIGHT',
line_style='--',
secondary_axis=False
)]
series3_obj = [pplot.Series(
data_source=pplot.BasicSource(
indep_var=numpy.array([0.5e-3, 1e-3, 1.5e-3]),
dep_var=numpy.array([10, 9, 6]),
),
label='Source 3',
color='b',
marker='h',
interp='STRAIGHT',
line_style='--',
secondary_axis=True
)]
series4_obj = [pplot.Series(
data_source=pplot.BasicSource(
indep_var=numpy.array([0.3e-3, 1.8e-3, 2.5e-3]),
dep_var=numpy.array([8, 8, 8]),
),
label='Source 4',
color='g',
marker='D',
interp='STRAIGHT',
line_style=None,
secondary_axis=True
)]
###
# Panels definition (Panel class)
###
panel_obj = pplot.Panel(
series=series1_obj+series2_obj+series3_obj+series4_obj,
primary_axis_label='Primary axis label',
primary_axis_units='-',
secondary_axis_label='Secondary axis label',
secondary_axis_units='W',
legend_props={'pos':'lower right', 'cols':1}
)
###
# Figure definition (Figure class)
###
fig_obj = pplot.Figure(
panels=panel_obj,
indep_var_label='Indep. var.',
indep_var_units='S',
log_indep_axis=False,
fig_width=4*2.25,
fig_height=3*2.25,
title='Library pplot Example'
)
# Save figure
output_fname = os.path.join(wdir, fname)
if not no_print:
print('Saving image to file {0}'.format(output_fname))
fig_obj.save(output_fname)
def series1_proc_func(indep_var, dep_var, xoffset):
""" Process data 1 series """
return (indep_var*1e-3)-xoffset, dep_var
Interpreter
The package has been developed and tested with Python 2.6, 2.7, 3.3, 3.4 and 3.5 under Linux (Debian, Ubuntu), Apple OS X and Microsoft Windows
Installing
$ pip install pplot
Documentation
Available at Read the Docs
Contributing
Abide by the adopted code of conduct
Fork the repository from GitHub and then clone personal copy [1]:
$ git clone \ https://github.com/[github-user-name]/pplot.git Cloning into 'pplot'... ... $ cd pplot $ export PPLOT_DIR=${PWD}
Install the project’s Git hooks and build the documentation. The pre-commit hook does some minor consistency checks, namely trailing whitespace and PEP8 compliance via Pylint. Assuming the directory to which the repository was cloned is in the
$PPLOT_DIR
shell environment variable:$ ${PPLOT_DIR}/sbin/complete-cloning.sh Installing Git hooks Building pplot package documentation ...
Ensure that the Python interpreter can find the package modules (update the
$PYTHONPATH
environment variable, or use sys.paths(), etc.)$ export PYTHONPATH=${PYTHONPATH}:${PPLOT_DIR}
Install the dependencies (if needed, done automatically by pip):
Astroid (Python 2.6: older than 1.4, Python 2.7 or newer: 1.3.8 or newer)
Cog (2.4 or newer)
Coverage (3.7.1 or newer)
Decorator (3.4.2 or newer)
Docutils (Python 2.6: 0.12 or newer and older than 0.13, Python 2.7: 0.12 or newer, Python 3.3: 0.12 or newer and older than 0.13, Python 3.4: 0.12 or newer, Python 3.5: 0.12 or newer, Python 3.6: 0.12 or newer)
Funcsigs (Python 2.x only, 0.4 or newer)
Inline Syntax Highlight Sphinx Extension (0.2 or newer)
Matplotlib (Python 2.6: 1.4.1 or newer and older than 2.0, Python 2.7: 1.4.1 or newer, Python 3.3: 1.4.1 or newer and older than 2.0, Python 3.4: 1.4.1 or newer, Python 3.5: 1.4.1 or newer, Python 3.6: 1.4.1 or newer)
Mock (Python 2.x only, 1.0.1 or newer)
Nose (Python 2.6: 1.0.0 or newer)
Numpy (Python 2.6: 1.8.2 or newer and older than 1.12, Python 2.7: 1.8.2 or newer, Python 3.3: 1.8.2 or newer and older than 1.12, Python 3.4: 1.8.2 or newer, Python 3.5: 1.8.2 or newer, Python 3.6: 1.8.2 or newer)
Pcsv (1.0.5 or newer)
Peng (1.0.6 or newer)
Pexdoc (1.0.9 or newer)
Pillow (Python 2.6: 2.6.1 or newer and older than 4.0, Python 2.7 or newer: 2.6.1 or newer)
Pmisc (1.2.2 or newer)
Py.test (2.7.0 or newer)
PyContracts (1.7.2 or newer except 1.7.7)
Pylint (Python 2.6: 1.3 or newer and older than 1.4, Python 2.7 or newer: 1.3.1 or newer)
Pytest-coverage (1.8.0 or newer)
Pytest-xdist (optional, 1.8.0 or newer)
ReadTheDocs Sphinx theme (0.1.9 or newer)
Scipy (Python 2.6: 0.13.3 or newer and older than 0.18, Python 2.7: 0.13.3 or newer, Python 3.3: 0.13.3 or newer and older than 0.18, Python 3.4: 0.13.3 or newer, Python 3.5: 0.13.3 or newer, Python 3.6: 0.13.3 or newer)
Six (1.4.0 or newer)
Sphinx (Python 2.6: 1.2.3 or newer and 1.4.9 or older, Python 2.7: 1.5 or newer, Python 3.3: 1.2.3 or newer and 1.4.9 or older, Python 3.4: 1.5 or newer, Python 3.5: 1.5 or newer, Python 3.6: 1.5 or newer)
Tox (1.9.0 or newer)
Virtualenv (13.1.2 or newer)
Implement a new feature or fix a bug
Write a unit test which shows that the contributed code works as expected. Run the package tests to ensure that the bug fix or new feature does not have adverse side effects. If possible achieve 100% code and branch coverage of the contribution. Thorough package validation can be done via Tox and Py.test:
$ tox GLOB sdist-make: .../pplot/setup.py py26-pkg inst-nodeps: .../pplot/.tox/dist/pplot-...zip
Setuptools can also be used (Tox is configured as its virtual environment manager) [2]:
$ python setup.py tests running tests running egg_info writing requirements to pplot.egg-info/requires.txt writing pplot.egg-info/PKG-INFO ...
Tox (or Setuptools via Tox) runs with the following default environments: py26-pkg, py27-pkg, py33-pkg, py34-pkg and py35-pkg [3]. These use the Python 2.6, 2.7, 3.3, 3.4 and 3.5 interpreters, respectively, to test all code in the documentation (both in Sphinx *.rst source files and in docstrings), run all unit tests, measure test coverage and re-build the exceptions documentation. To pass arguments to Py.test (the test runner) use a double dash (--) after all the Tox arguments, for example:
$ tox -e py27-pkg -- -n 4 GLOB sdist-make: .../pplot/setup.py py27-pkg inst-nodeps: .../pplot/.tox/dist/pplot-...zip ...
Or use the
-a
Setuptools optional argument followed by a quoted string with the arguments for Py.test. For example:$ python setup.py tests -a "-e py27-pkg -- -n 4" running tests ...
There are other convenience environments defined for Tox [4]:
py26-repl, py27-repl, py33-repl, py34-repl and py35-repl run the Python 2.6, 2.7, 3.3, 3.4 or 3.5 REPL, respectively, in the appropriate virtual environment. The pplot package is pip-installed by Tox when the environments are created. Arguments to the interpreter can be passed in the command line after a double dash (--)
py26-test, py27-test, py33-test, py34-test and py35-test run py.test using the Python 2.6, 2.7, 3.3, 3.4 or Python 3.5 interpreter, respectively, in the appropriate virtual environment. Arguments to py.test can be passed in the command line after a double dash (--) , for example:
$ tox -e py34-test -- -x test_pplot.py GLOB sdist-make: [...]/pplot/setup.py py34-test inst-nodeps: [...]/pplot/.tox/dist/pplot-[...].zip py34-test runtests: PYTHONHASHSEED='680528711' py34-test runtests: commands[0] | [...]py.test -x test_pplot.py ===================== test session starts ===================== platform linux -- Python 3.4.2 -- py-1.4.30 -- [...] ...
py26-cov, py27-cov, py33-cov, py34-cov and py35-cov test code and branch coverage using the Python 2.6, 2.7, 3.3, 3.4 or 3.5 interpreter, respectively, in the appropriate virtual environment. Arguments to py.test can be passed in the command line after a double dash (--). The report can be found in
${PPLOT_DIR}/.tox/py[PV]/usr/share/pplot/tests/htmlcov/index.html
where [PV] stands for 26, 27, 33, 34 or 35 depending on the interpreter used
Verify that continuous integration tests pass. The package has continuous integration configured for Linux (via Travis) and for Microsoft Windows (via Appveyor). Aggregation/cloud code coverage is configured via Codecov. It is assumed that the Codecov repository upload token in the Travis build is stored in the
${CODECOV_TOKEN}
environment variable (securely defined in the Travis repository settings page). Travis build artifacts can be transferred to Dropbox using the Dropbox Uploader script (included for convenience in the${PPLOT_DIR}/sbin
directory). For an automatic transfer that does not require manual entering of authentication credentials place the APPKEY, APPSECRET, ACCESS_LEVEL, OAUTH_ACCESS_TOKEN and OAUTH_ACCESS_TOKEN_SECRET values required by Dropbox Uploader in the in the${DBU_APPKEY}
,${DBU_APPSECRET}
,${DBU_ACCESS_LEVEL}
,${DBU_OAUTH_ACCESS_TOKEN}
and${DBU_OAUTH_ACCESS_TOKEN_SECRET}
environment variables, respectively (also securely defined in Travis repository settings page)Document the new feature or bug fix (if needed). The script
${PPLOT_DIR}/sbin/build_docs.py
re-builds the whole package documentation (re-generates images, cogs source files, etc.):$ ${PKG_BIN_DIR}/build_docs.py -h usage: build_docs.py [-h] [-d DIRECTORY] [-r] [-n NUM_CPUS] [-t] Build peng package documentation optional arguments: -h, --help show this help message and exit -d DIRECTORY, --directory DIRECTORY specify source file directory (default ../peng) -r, --rebuild rebuild exceptions documentation. If no module name is given all modules with auto-generated exceptions documentation are rebuilt -n NUM_CPUS, --num-cpus NUM_CPUS number of CPUs to use (default: 1) -t, --test diff original and rebuilt file(s) (exit code 0 indicates file(s) are identical, exit code 1 indicates file(s) are different)
Footnotes
License
The MIT License (MIT)
Copyright (c) 2013-2017 Pablo Acosta-Serafini
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. .. CHANGELOG.rst .. Copyright (c) 2013-2017 Pablo Acosta-Serafini .. See LICENSE for details
Changelog
1.0.4 [2017-02-25]: Fixed tick marks labels in the [0, 1] range. Closed image tests escapes
1.0.3 [2017-02-16]: Python 3.6 support
1.0.2 [2016-05-16]: PyPI front page fixes
1.0.1 [2016-05-16]: Documentation build fixes to display README information correctly in repositories and PyPI
1.0.0 [2016-05-16]: Final release of 1.0.0 branch
1.0.0rc1 [2016-05-12]: Initial commit, forked a subset from putil PyPI package
Project details
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.