P-Rep management command line interface

Navigation

Verified details

These details have been verified by PyPI
Maintainers
Avatar for iconfoundation from gravatar.com iconfoundation Avatar for iconloop from gravatar.com iconloop

Unverified details

These details have not been verified by PyPI
Project links
GitHub Statistics

View statistics for this project via Libraries.io, or by using our public dataset on Google BigQuery

Meta

License: Apache Software License (Apache License 2.0)

Author: ICON Foundation

Classifiers

Project description

P-Rep tools (preptools) Tutorial

This tutorial is intended to give an introduction to using preptools. This guide will walk through the basics of setting up the development environment and the usage of preptools CLI commands.

Building from source

First, clone this project. Then go to the project directory, create a virtualenv environment, and run the build script. Then install preptools with the .whl file.

$ python -m venv venv             # Create a virtual environment.
$ source venv/bin/activate        # Enter the virtual environment.
(venv)$ ./build.sh                # run build script.
(venv)$ ls dist                   # check result wheel file.
preptools-1.0.10-py3-none-any.whl

Installation

This chapter explains how to install P-Rep Tools on your system.

Requirements

  • OS: MacOS or Linux

  • Windows is not supported.

  • Python

    • Make a virtualenv for Python 3.7+
    • Check your Python version 
      $ python3 -V

Setup

Install dependencies

Some native tools and libraries are needed to install preptools without any errors.

$ sudo apt-get install -y libssl-dev build-essential automake pkg-config libtool libffi-dev libgmp-dev libyaml-cpp-dev
$ sudo apt-get install -y python3.7-dev libsecp256k1-dev python3-pip

Install preptools

Install the preptools with the .whl file as below.

(venv) $ pip install dist/preptools-1.0.10-py3-none-any.whl

Install the preptools with pypi

(venv) $ pip install preptools

How to use P-Rep tools

Command-line Interfaces (CLIs)

Overview

preptools provides several commands. Here is the list of the available commands.

Usage

usage: preptools [-h]
                 {registerPRep,unregisterPRep,setPRep,setGovernanceVariables,setBonderList,registerProposal,cancelProposal,voteProposal,getPRep,getBonderList,getPReps,getProposal,getProposals,txresult,txbyhash,keystore,genconf}
                 ...

P-Rep management command line interface v1.1.0

optional arguments:
  -h, --help            show this help message and exit

subcommands:
  {registerPRep,unregisterPRep,setPRep,setGovernanceVariables,setBonderList,registerProposal,cancelProposal,voteProposal,getPRep,getBonderList,getPReps,getProposal,getProposals,txresult,txbyhash,keystore,genconf}
    registerPRep        Register P-Rep
    unregisterPRep      Unregister P-Rep WARNING!! Unregistering P-Rep does
                        not return the registration fee
    setPRep             Change enrolled P-Rep information
    setGovernanceVariables
                        Change Governance variables used in network operation
                        deprecated.since revision9, set i-rep with network
                        proposal
    setBonderList       Set allowed bonder list of P-Rep
    registerProposal    Register Proposal
    cancelProposal      Cancel Proposal
    voteProposal        Vote Proposal
    getPRep             Inquire P-Rep information
    getBonderList       Inquire allowed bonder list of P-Rep
    getPReps            Get live status of all registered P-Rep candidates
    getProposal         Inquire Proposal information using transaction hash
    getProposals        Inquire all of network proposal list.
    txresult            Get transaction result by hash
    txbyhash            Get transaction by hash
    keystore            Create keystore file in the specified path.
    genconf             Create config file in the specified path.

Options

shorthand, Name default Description
-h, --help Show this help message and exit

Setting PRep commands

There are four commands to set up the P-Rep information: preptools registerPRep, preptools unregisterPRep, preptools setPRep, and preptools setGovernanceVariables. Whenever the commands are called, they load the configuration from preptools_config.json. In order to use other configuration file, please specify the file location with the -c option.

registerPRep

Description

Register P-Rep.
There are two ways of registering a P-Rep.

  • Using command line option
    Input P-Rep information with --[OPT_NAME] OPT_VALUE.
    The order of priority is command line > json

  • Using json file
    Input P-Rep information with --prep-json JSON_PATH.

Usage

usage: preptools registerPRep [-h] [--url URL] [--nid NID] [--config CONFIG]
                              [--yes] [--verbose] [--password PASSWORD]
                              [--keystore KEYSTORE]
                              [--step-limit-s STEP_LIMIT] [--name [NAME]]
                              [--country COUNTRY] [--city CITY]
                              [--email EMAIL] [--website WEBSITE]
                              [--details DETAILS] [--p2p-endpoint P2PENDPOINT]
                              [--node-address NODEADDRESS]
                              [--prep-json [PREP_JSON]]

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit-s STEP_LIMIT
                        step limit to set
  --name [NAME]         P-Rep name
  --country COUNTRY     P-Rep's country
  --city CITY           P-Rep's city
  --email EMAIL         P-Rep's email
  --website WEBSITE     P-Rep's homepage url
  --details DETAILS     json url including P-Rep detailed information
  --p2p-endpoint P2PENDPOINT
                        Network info used for connecting among P-Rep nodes
  --node-address NODEADDRESS
                        PRep Node Key
  --prep-json [PREP_JSON]
                        json file having P-Rep information

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
-p, --password keystore password
-k, --keystore keystore file path
-s, --step-limit 0x50000000 step limit to set
--name P-Rep name
--country P-Rep's country. This require ISO 3166-1 alpha-3 standard.
--city P-Rep's city.
--email P-Rep's email. ex) "example@iconloop.com"
--website P-Rep's homepage url. ex) "https://node.example.com/"
--details json url including P-Rep detailed information
ex) "https://node.example.com/json"
--p2p-endpoint Network info used for connection among P-Rep nodes.
ex) “123.45.67.89:7100” or “node.example.com:7100”
--node-address PRep Node Key (default: Operator Key)
--prep-json json file having P-Rep information

Examples

(venv) $ cat registerPRep.json 
{
    "name": "banana node",
    "country": "USA",
    "city": "New York",
    "email": "banana@example.com",
    "website": "https://icon.banana.com",
    "details": "https://icon.banana.com/json",
    "p2pEndpoint": "node.example.com:7100",
    "nodeAddress": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6"
}

(venv) $ preptools registerPRep -k test_keystore --prep-json registerPRep.json 
> Password: 
[Request] ======================================================================
{
    "from_": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6",
    "to": "cx0000000000000000000000000000000000000000",
    "value": 2000000000000000000000,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "registerPRep",
    "data_type": "call",
    "params": {
        "name": "banana node",
        "country": "USA",
        "city": "New York",
        "email": "banana@example.com",
        "website": "https://icon.banana.com",
        "details": "https://icon.banana.com/json",
        "p2pEndpoint": "node.example.com:7100",
        "nodeAddress": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d400"
    }
}

> Continue? [Y/n]
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0xe667b8de967e4c5e2cc5f4fc2775766f87517935e0875a8c4d0b9c8c2ce01846",
    "id": 1234
}

(venv) $ cat registerPRep.json 
{
    "email": "banana@example.com",
    "website": "https://icon.banana.com",
    "details": "https://icon.banana.com/json",
    "p2pEndpoint": "node.example.com:7100",
    "nodeAddress": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d400"
}

(venv) preptools registerPRep -k test_keystore --prep-json registerPRep.json --name "kokoa node"
> Password: 
 > country : USA
 > city : New York
[Request] ======================================================================
{
    "from_": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6",
    "to": "cx0000000000000000000000000000000000000000",
    "value": 2000000000000000000000,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "registerPRep",
    "data_type": "call",
    "params": {
        "email": "banana@example.com",
        "website": "https://icon.banana.com",
        "details": "https://icon.banana.com/json",
        "p2pEndpoint": "node.example.com:7100",
        "name": "kokoa node",
        "country": "USA",
        "city": "New York"
    }
}

> Continue? [Y/n]
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0xeb00ea0ad9ee155067f37015d2403067904649a76a35dd06197600e408d30e3e",
    "id": 1234
}

unregisterPRep

Description

Unregister P-Rep.

Usage

usage: preptools unregisterPRep [-h] [--url URL] [--nid NID] [--config CONFIG]
                                [--yes] [--verbose] [--password PASSWORD]
                                [--keystore KEYSTORE]
                                [--step-limit-s STEP_LIMIT]

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit-s STEP_LIMIT
                        step limit to set

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
-p, --password keystore password
-k, --keystore keystore file path
-s, --step-limit 0x50000000 step limit to set

Examples

(venv) $ preptools unregisterPRep -k test_keystore 
> Password: 
[Request] ======================================================================
{
    "from_": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6",
    "to": "cx0000000000000000000000000000000000000000",
    "value": 0,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "unregisterPRep",
    "data_type": "call",
    "params": {}
}

> Continue? [Y/n]
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0x027038296f595aedd1bfa680de2e20c3fd133816f9c74807e440bf6c548fb9aa",
    "id": 1234
}

setPRep

Description

Change enrolled P-Rep information.
There are three way of set P-Rep.

  • Using command line option
    You can input P-Rep information with --[OPT_NAME] OPT_VALUE.
    The order of priority is command line > json.

  • Using json file
    You can input P-Rep information with --prep-json JSON_PATH.

  • Using interactive mode [--i]
    Activate interactive mode and input P-Rep info what you want.
    If you don't want to input, just enter.

Usage

usage: preptools setPRep [-h] [--url URL] [--nid NID] [--config CONFIG]
                         [--yes] [--verbose] [--password PASSWORD]
                         [--keystore KEYSTORE] [--step-limit-s STEP_LIMIT]
                         [-i] [--name NAME] [--country COUNTRY] [--city CITY]
                         [--email EMAIL] [--website WEBSITE]
                         [--details DETAILS] [--p2p-endpoint P2PENDPOINT]
                         [--node-address NODEADDRESS]
                         [--prep-json PREP_JSON]

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit-s STEP_LIMIT
                        step limit to set
  -i, --interactive     Activate interactive mode when prep fields are blank.
  --name NAME           PRep name
  --country COUNTRY     P-Rep's country
  --city CITY           P-Rep's city
  --email EMAIL         P-Rep's email
  --website WEBSITE     P-Rep's homepage url
  --details DETAILS     json url including P-Rep details information
  --p2p-endpoint P2PENDPOINT
                        Network info used for connecting among P-Rep nodes
  --node-address NODEADDRESS
                        PRep Node Key (Default: Own Address)
  --prep-json PREP_JSON
                        json file including P-Rep information

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
-p, --password keystore password
-k, --keystore keystore file path
-s, --step-limit 0x50000000 step limit to set
-i, --interactive Activate interactive mode when prep fields are blank.
--name P-Rep name
--country P-Rep's country. This require ISO 3166-1 alpha-3 standard.
--city P-Rep's city.
--email P-Rep's email. ex) "example@iconloop.com"
--website P-Rep's homepage url. ex) "https://node.example.com/"
--details json url including P-Rep detailed information
ex) "https://node.example.com/json"
--p2p-endpoint Network info used for connection among P-Rep nodes.
ex) “123.45.67.89:7100” or “node.example.com:7100”
--node-address PRep Node Key (Default: Own Address)
--prep-json json file having P-Rep information

Examples

(venv) $ cat setPRep.json 
{
    "name": "kokoa node",
    "country": "USA",
    "website": "https://icon.kokoa.com",
    "details": "https://icon.kokoa.com/json",
    "p2pEndpoint": "node.example.com:7100",
    "nodeAddress": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d400"
}

(venv) $ preptools setPRep -k test_keystore --prep-json setPRep.json 
> Password: 
[Request] ======================================================================
{
    "from_": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6",
    "to": "cx0000000000000000000000000000000000000000",
    "value": 0,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "setPRep",
    "data_type": "call",
    "params": {
        "name": "kokoa node",
        "country": "USA",
        "website": "https://icon.kokoa.com",
        "details": "https://icon.kokoa.com/json",
        "p2pEndpoint": "node.example.com:7100",
	"nodeAddress": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d400"
    }
}

> Continue? [Y/n]
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0xc8456053128897a0941dab4c79428db91dda5a2899e3813698146ac25808c4c9",
    "id": 1234
}

(venv) $ preptools setPRep -k test_keystore --prep-json setPRep.json -i
> Password: 
 > city : New York
 > email : 
[Request] ======================================================================
{
    "from_": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6",
    "to": "cx0000000000000000000000000000000000000000",
    "value": 0,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "setPRep",
    "data_type": "call",
    "params": {
        "name": "kokoa node",
        "country": "USA",
        "website": "https://icon.kokoa.com",
        "details": "https://icon.kokoa.com/json",
        "p2pEndpoint": "node.example.com:7100",
        "city": "New York",
	"nodeAddress": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d400"
    }
}

> Continue? [Y/n]
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0xff0c4b603a2ae5ba50f658e0d0188210a5afeec559e44df29b55806342fa4563",
    "id": 1234
}

setGovernanceVariables

Description

Change Governance variables used in network operation.
You can only change it once per term.
Other items besides irep may be added later.

Usage

usage: preptools setGovernanceVariables [-h] [--url URL] [--nid NID]
                                        [--config CONFIG] [--yes] [--verbose]
                                        [--password PASSWORD]
                                        [--keystore KEYSTORE]
                                        [--step-limit-s STEP_LIMIT] --irep
                                        IREP

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit-s STEP_LIMIT
                        step limit to set
  --irep IREP           amounts of irep

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
-p, --password keystore password
-k, --keystore keystore file path
-s, --step-limit 0x50000000 step limit to set
--irep amounts of irep in loop

Examples

(venv) $ preptools setGovernanceVariables --irep 50_000_000_000_000_000_000_000
> Password: 
[Request] ======================================================================
{
    "from_": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6",
    "to": "cx0000000000000000000000000000000000000000",
    "value": 0,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "setGovernanceVariables",
    "data_type": "call",
    "params": {
        "irep": "0xa968163f0a57b400000"
    }
}

> Continue? [Y/n]
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0xc15b6989cd39e01b3d4bb65b72e6f7fcbc009020779b7f9fc60d59da4df7b091",
    "id": 1234
}

setBonderList

Description

P-Rep whitelist up to 10 addresses which can post the bond

Usage

usage: preptools setBonderList [-h] [--url URL] [--nid NID] [--config CONFIG]
                               [--yes] [--verbose] [--password PASSWORD]
                               [--keystore KEYSTORE] [--step-limit STEP_LIMIT]
                               --bonder-list BONDERLIST

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit STEP_LIMIT, -s STEP_LIMIT
                        step limit to set
  --bonder-list BONDERLIST
                        list of address. separator is ','

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
-p, --password keystore password
-k, --keystore keystore file path
-s, --step-limit 0x50000000 step limit to set
--bonder-list list of whiltelisted address

Examples

(venv) $ preptools setBonderList --bonder-list hxf1ba1be02ff3a15c5b5c63f2bdba810fefb6f0b5,hx7101544346685b37c7bbb56c2c9b8ed56f2895e2,hxa101544346685b37c7bbb56c2c9b8ed56f2895e1
[Request] ======================================================================
{
    "from_": "hx7101544346685b37c7bbb56c2c9b8ed56f2895e2",
    "to": "cx0000000000000000000000000000000000000000",
    "value": 0,
    "step_limit": 1342177280,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "setBonderList",
    "data_type": "call",
    "params": {
        "bonderList": [
            "hxf1ba1be02ff3a15c5b5c63f2bdba810fefb6f0b5",
            "hx7101544346685b37c7bbb56c2c9b8ed56f2895e2",
            "hxa101544346685b37c7bbb56c2c9b8ed56f2895e1"
        ]
    }
}

> Continue? [Y/n]
[Response] =====================================================================
txHash : {'jsonrpc': '2.0', 'result': '0x3825c983b50e42477ba17382d18ddf6e82de59b0b9d2c4813a392d0d758193b7', 'id': 1636530159}

Preptools information commands

Commands that show the P-Rep information.

getPRep

Description

Inquire P-Rep information

Usage

usage: preptools getPRep [-h] [--url URL] [--nid NID] [--config CONFIG]
                         address

positional arguments:
  address               Address of P-Rep you are looking for

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
address Address of P-Rep you are looking for

Examples

(venv) $ preptools getPRep hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6
[Request] ======================================================================
{
    "from_": "hx1234567890123456789012345678901234567890",
    "to": "cx0000000000000000000000000000000000000000",
    "method": "getPRep",
    "params": {
        "address": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6"
    }
}

request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "status": "0x1",
        "grade": "0x2",
        "name": "kokoa node",
        "country": "USA",
        "city": "New York",
        "stake": "0x0",
        "delegated": "0x0",
        "totalBlocks": "0x0",
        "validatedBlocks": "0x0",
        "irep": "0xa968163f0a57b400000",
        "irepUpdateBlockHeight": "0x58f",
        "lastGenerateBlockHeight": "-0x1",
        "email": "rhkddnjs99@hotmail.com",
        "website": "https://icon.kokoa.com",
        "details": "https://icon.kokoa.com/json",
        "p2pEndpoint": "node.example.com:7100",
        "nodeAddress": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d400"
    },
    "id": 1234
}

getBonderList

Description

Get the list of addresses which can post the bond

Usage

usage: preptools getBonderList [-h] [--url URL] [--nid NID] [--config CONFIG]
                               [--yes] [--verbose]
                               address

positional arguments:
  address               Address of P-Rep you are looking for

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
address Address of P-Rep you are looking for

Examples

(venv) $ preptools getBonderList hx7101544346685b37c7bbb56c2c9b8ed56f2895e2
[Request] ======================================================================
{
    "from_": "hx1234567890123456789012345678901234567890",
    "to": "cx0000000000000000000000000000000000000000",
    "method": "getBonderList",
    "params": {
        "address": "hx7101544346685b37c7bbb56c2c9b8ed56f2895e2"
    }
}

[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "bonderList": [
            "hxf1ba1be02ff3a15c5b5c63f2bdba810fefb6f0b5",
            "hx7101544346685b37c7bbb56c2c9b8ed56f2895e2",
            "hxa101544346685b37c7bbb56c2c9b8ed56f2895e1"
        ]
    },
    "id": 1636530914
}

getPReps

Description

Get live status of all registered P-Rep candidates

Usage

usage: preptools getPReps [-h] [--url URL] [--nid NID] [--config CONFIG]
                          [--start-ranking START_RANKING]
                          [--end-ranking END_RANKING]
                          [--block-height BLOCK_HEIGHT]

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --start-ranking START_RANKING
                        Get P-Rep list which starts from start ranking
  --end-ranking END_RANKING
                        Get P-Rep list which ends with end ranking, inclusive
  --block-height BLOCK_HEIGHT
                        Block height which ranking formed

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path
--start-ranking Get P-Rep list which starts from start ranking
--end-ranking Get P-Rep list which ends with end ranking, inclusive
--block-height Block height which ranking formed

Examples

(venv) $ preptools getPReps
[Request] ======================================================================
{
    "from_": "hx1234567890123456789012345678901234567890",
    "to": "cx0000000000000000000000000000000000000000",
    "method": "getPReps",
    "params": null
}

request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "blockHeight": "0x1e3f3",
        "startRanking": "0x0",
        "totalDelegated": "0x0",
        "totalStake": "0x0",
        "preps": [
            {
                "name": "Banana node",
                "country": "USA",
                "city": "New York",
                "grade": "0x0",
                "address": "hx8f21e5c54f006b6a5d5fe65486908592151a7c57",
                "irep": "0xc350",
                "irepUpdateBlockHeight": "0x1200",
                "lastGenerateBlockHeight": "-0x1",
                "stake": "0x21e19e0c9bab2400000",
                "delegated": "0x204fce5e3e25026110000000",
                "totalBlocks": "0x2710",
                "validatedBlocks": "0x2328"
            },
            ...
        ]
    },
    "id": 1234
}


(venv) $ preptools getPReps --start-ranking "0x1" --end-ranking "0x8" --block-height "0x1234"
[Request] ======================================================================
{
    "from_": "hx1234567890123456789012345678901234567890",
    "to": "cx0000000000000000000000000000000000000000",
    "method": "getPReps",
    "params": {
        "startRanking": "0x1",
        "endRanking": "0x8",
        "blockHeight": "0x1234"
    }
}

request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "blockHeight": "0x1e452",
        "startRanking": "0x0",
        "totalDelegated": "0x0",
        "totalStake": "0x0",
        "preps": [
            {
                "name": "Banana node",
                "country": "USA",
                "city": "New York",
                "grade": "0x0",
                "address": "hx8f21e5c54f006b6a5d5fe65486908592151a7c57",
                "irep": "0xc350",
                "irepUpdateBlockHeight": "0x1200",
                "lastGenerateBlockHeight": "-0x1",
                "stake": "0x21e19e0c9bab2400000",
                "delegated": "0x204fce5e3e25026110000000",
                "totalBlocks": "0x2710",
                "validatedBlocks": "0x2328"
            },
            ...
        ]
    },
    "id": 1234
}

Network Proposal commands

There are 3 commands to network-proposal: registerProposal, cancelProposal and voteProposal Whenever the commands are called, they load the configuration from preptools_config.json. In order to use other configuration file, please specify the file location with the -c option.

registerProposal

refer registerProposal request format

Description

Register Network-proposal

Usage

usage: preptools registerProposal [-h] [--url URL] [--nid NID]
                                  [--config CONFIG] [--yes] [--verbose]
                                  [--password PASSWORD] [--keystore KEYSTORE]
                                  [--step-limit-s STEP_LIMIT] --title TITLE
                                  --desc DESC --type TYPE
                                  [--value-value VALUE_VALUE]
                                  [--value-code VALUE_CODE]
                                  [--value-name VALUE_NAME]
                                  [--value-address VALUE_ADDRESS]
                                  [--value-type VALUE_TYPE]

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit-s STEP_LIMIT
                        step limit to set
  --title TITLE         Proposal title
  --desc DESC           Proposal description
  --type TYPE           type of Proposal
  --value-value VALUE_VALUE
                        type 0:text message, type 4:step price in loop
                        (required when type 0 or 4)
  --value-code VALUE_CODE
                        revision code (required when type 1)
  --value-name VALUE_NAME
                        icon-service version (required when type 1)
  --value-address VALUE_ADDRESS
                        type 2: address of SCORE, type 3: address of main/sub
                        P-Rep (required when type 2 or 3)
  --value-type VALUE_TYPE
                        0 : freeze, 1 : unfreeze (required when type 2)

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1:9000/api/v3 node url
-n, --nid 3 networkId mainnet(1), testnet(2)
--config configuration file path.
-y, --yes Do not confirm if you want to send request
-v, --verbose verbose mode flag
-p, --password Keystore file's password
-k, --keystore keystore file path
-s, --step-limit 0x50000000 step limit to set
--title title of network-proposal
--desc description of network-proposal
--type type of network-proposal
--value-value value of value field
--value-code value of code field
--value-address value of address field
--value-type value of type field

Examples

(venv)$ preptools registerProposal -c preptools_config.json -k prep_keys0 -p qwer1234% --title pro0 --desc "first proposal" --type 4 --value-value 1234
[Value] ========================================================================
{
    "value": "1234"
}
[Request] ======================================================================
{
    "from_": "hxb74e29fba1809a105fdec433040a4e713bbe91fe",
    "to": "cx0000000000000000000000000000000000000001",
    "value": 0,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "registerProposal",
    "data_type": "call",
    "params": {
        "title": "pro0",
        "description": "first proposal",
        "type": "0x4",
        "value": "0x7b2276616c7565223a202231323334227d"
    }
}

> Continue? [Y/n]Y
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0x02221f9346f9c9b3322ea33e67a1ca0fbe9491e0ea3aefb5154a43e2ea829fa4",
    "id": 1234
}

voteProposal

refer voteProposal request format

Description

Vote Network-proposal

Usage

usage: preptools voteProposal [-h] [--url URL] [--nid NID] [--config CONFIG]
                              [--yes] [--verbose] [--password PASSWORD]
                              [--keystore KEYSTORE]
                              [--step-limit-s STEP_LIMIT] --id ID --vote VOTE

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit-s STEP_LIMIT
                        step limit to set
  --id ID               hash of registerProposal TX
  --vote VOTE           0 : disagree, 1 : agree

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1:9000/api/v3 node url
-n, --nid 3 networkId mainnet(1), testnet(2)
--config configuration file path.
-v, --verbose verbose mode flag
-y, --yes Do not confirm if you want to send request
-p, --password password of keystore file
-k, --keystore path of keystore file
-s, --step-limit 0x50000000 step limit to set
--id id of network-proposal to vote
--vote voting value(0: disagree, 1: agree)

Examples

(venv)$ preptools voteProposal -k prep_keys1 --id 0x515d0c7470e56358a6085ca93d305c4c28d004c10d110b26570dadc34bf2e492 --vote 0
> Password:
[Request] ======================================================================
{
    "from_": "hx85d62b91d70bc2390b636a8d64136a413e671e3a",
    "to": "cx0000000000000000000000000000000000000001",
    "value": 0,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "voteProposal",
    "data_type": "call",
    "params": {
        "id": "0x515d0c7470e56358a6085ca93d305c4c28d004c10d110b26570dadc34bf2e492",
        "vote": 0
    }
}

> Continue? [Y/n]Y
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0x22ca6eb228586ed2a00924f18bc57f1819214bf0d5c5d305b03d72a931360cc8",
    "id": 1234
}

cancelProposal

refer cancelProposal request format

Description

Cancel Network-proposal

Usage

usage: preptools cancelProposal [-h] [--url URL] [--nid NID] [--config CONFIG]
                                [--yes] [--verbose] [--password PASSWORD]
                                [--keystore KEYSTORE]
                                [--step-limit-s STEP_LIMIT] --id [ID]

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --password PASSWORD, -p PASSWORD
                        keystore password
  --keystore KEYSTORE, -k KEYSTORE
                        keystore file path
  --step-limit-s STEP_LIMIT
                        step limit to set
  --id [ID]             hash of registerProposal TX

Options

shorthand, Name default Description
-h, --help show this help message and exit
-u, --url http://127.0.0.1:9000/api/v3 node url
-n, --nid 3 networkId mainnet(1), testnet(2)
--config configuration file path.
-y, --yes Do not confirm if you want to send request
-v, --verbose verbose mode flag
-p, --password password of keystore file
-k, --keystore path of keystore file
-s, --step-limit 0x50000000 step limit to set
--id id of network-proposal to cancel

Examples

(venv)$ preptools cancelProposal -k prep_keys0 --id 0x02221f9346f9c9b3322ea33e67a1ca0fbe9491e0ea3aefb5154a43e2ea829fa4
> Password:
[Request] ======================================================================
{
    "from_": "hxb74e29fba1809a105fdec433040a4e713bbe91fe",
    "to": "cx0000000000000000000000000000000000000001",
    "value": 0,
    "step_limit": 268435456,
    "nid": 3,
    "nonce": null,
    "version": 3,
    "timestamp": null,
    "method": "cancelProposal",
    "data_type": "call",
    "params": {
        "id": "0x02221f9346f9c9b3322ea33e67a1ca0fbe9491e0ea3aefb5154a43e2ea829fa4"
    }
}

> Continue? [Y/n]Y
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": "0x344887e8b9b30e523991e44602eee51857fd7a55e5437b34a7e8d0f2ede8c019",
    "id": 1234
}

Querying Network Proposal commands

There are 2 commands to network-proposal: getProposal and getProposals. Whenever the commands are called, they load the configuration from preptools_config.json. In order to use other configuration file, please specify the file location with the -c option.

getProposal

refer getProposal request format

Description

Querying Network-proposal with given proposal-id

Usage

usage: preptools getProposal [-h] [--url URL] [--nid NID] [--config CONFIG]
                             [--yes] [--verbose]
                             transaction_hash

positional arguments:
  transaction_hash      hash of registerProposal transaction

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode

Options

shorthand, Name default Description
-c, --config configuration file path.
-h, --help show this help message and exit
-u, --url http://127.0.0.1:9000/api/v3 node url
-n, --nid 3 networkId mainnet(1), testnet(2)
-v, --verbose verbose mode flag

examples

(venv)$ preptools getProposal 0x02221f9346f9c9b3322ea33e67a1ca0fbe9491e0ea3aefb5154a43e2ea829fa4
[Request] ======================================================================
{
    "from_": "hx1234567890123456789012345678901234567890",
    "to": "cx0000000000000000000000000000000000000001",
    "method": "getProposal",
    "params": {
        "id": "0x02221f9346f9c9b3322ea33e67a1ca0fbe9491e0ea3aefb5154a43e2ea829fa4"
    }
}

request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "id": "0x02221f9346f9c9b3322ea33e67a1ca0fbe9491e0ea3aefb5154a43e2ea829fa4",
        "proposer": "hxb74e29fba1809a105fdec433040a4e713bbe91fe",
        "proposerName": "nodehxb74e29fba1809a105fdec433040a4e713bbe91fe",
        "status": "0x0",
        "startBlockHeight": "0x2c",
        "endBlockHeight": "0x2f",
        "contents": {
            "title": "pro0",
            "description": "first proposal",
            "type": "0x4",
            "value": {
                "value": "1234"
            }
        },
        "vote": {
            "agree": {
                "list": [],
                "amount": "0x0"
            },
            "disagree": {
                "list": [],
                "amount": "0x0"
            },
            "noVote": {
                "list": [
                    "hxb74e29fba1809a105fdec433040a4e713bbe91fe",
                    "hx85d62b91d70bc2390b636a8d64136a413e671e3a",
                    "hxd891096dd01c1af790c29d55022a35357684643c",
                    "hx44ae89b457ccfb1bacbe35d278933ba887373b1b",
                    "hxf2c6b56e6dfcfe7c3b9fbd3d1ca1d08973b8d363",
                    "hxe54bdf4b25affa59c8963f1e4a6c45183aee167f",
                    "hx02ccb9e378a35e11a65b5c60e796fded98383b37",
                    "hx064c3d9b4982aae0253b9a8b3dd106823c107c25",
                    "hxcd294f136f39232d97081f2dfa22886c76f45afb",
                    "hxd685153db2a09347115cf0d8d1c5f9ab174bd802",
                    "hx383b555e0301b77b1c326815bccaaaf382ecd238",
                    "hxb0bfb180fb60ac68a0d3dbcadf509af07dd1f501",
                    "hxa5861173d2bd05dd9bfc5c5d74faa654f8d37c7b",
                    "hxee194a44eb4d06fb7c8a9515f74eb41735046be2",
                    "hx6e220a1b6c0fc12b2d3cc6122fccf2e9ec3d1406",
                    "hxa46f74425c0e588be8c93bbabf1be2c67da12066",
                    "hx81c5db07cd6c1c569e0a5abebdb7b108157d80b5",
                    "hx46ca63475e630e7c3a8c3f8c0e2981b675f32919",
                    "hxffa3675581c0209c2adcc598767c77d43f999a33",
                    "hx9259b69bbdea01f32e97d91401ada24d12965ae3",
                    "hx282c3778a572d4d0d1eb8e65ab53daaedea3f68e",
                    "hx25b84c8fe8bfabda4fb30523a1923a79cc304af5"
                ],
                "amount": "0x10658da4dff32a862400000"
            }
        }
    },
    "id": 1234
}

getProposals

refer getProposals request format

Description

Querying all Network-proposal

Usage

usage: preptools getProposals [-h] [--url URL] [--nid NID] [--config CONFIG]
                              [--yes] [--verbose] [--type [TYPE]]
                              [--status [STATUS]]

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path
  --yes, -y             Don't want to ask send transaction.
  --verbose, -v         Verbose mode
  --type [TYPE]         type of network proposal to filter
  --status [STATUS]     status of network proposal to filter

Options

shorthand, Name default Description
-c, --config configuration file path.
-h, --help show this help message and exit
-u, --url http://127.0.0.1:9000/api/v3 node url
-n, --nid 3 networkId mainnet(1), testnet(2)
-v, --verbose verbose mode flag
--type Type of network proposal to filter
--status Status of network proposal to filter

examples

(venv)$ preptools getProposals
[Request] ======================================================================
{
    "from_": "hx1234567890123456789012345678901234567890",
    "to": "cx0000000000000000000000000000000000000001",
    "method": "getProposals",
    "params": null
}

request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "proposals": [
            {
                "id": "0x02221f9346f9c9b3322ea33e67a1ca0fbe9491e0ea3aefb5154a43e2ea829fa4",
                "proposer": "hxb74e29fba1809a105fdec433040a4e713bbe91fe",
                "proposerName": "nodehxb74e29fba1809a105fdec433040a4e713bbe91fe",
                "status": "0x0",
                "startBlockHeight": "0x2c",
                "endBlockHeight": "0x2f",
                "contents": {
                    "title": "pro0",
                    "description": "first proposal",
                    "type": "0x4",
                    "value": {
                        "value": "1234"
                    }
                },
                "vote": {
                    "agree": {
                        "count": "0x0",
                        "amount": "0x0"
                    },
                    "disagree": {
                        "count": "0x0",
                        "amount": "0x0"
                    },
                    "noVote": {
                        "count": "0x16",
                        "amount": "0x10658da4dff32a862400000"
                    }
                }
            },
            {
                "id": "0x515d0c7470e56358a6085ca93d305c4c28d004c10d110b26570dadc34bf2e492",
                "proposer": "hxb74e29fba1809a105fdec433040a4e713bbe91fe",
                "proposerName": "nodehxb74e29fba1809a105fdec433040a4e713bbe91fe",
                "status": "0x0",
                "startBlockHeight": "0x2c",
                "endBlockHeight": "0x2f",
                "contents": {
                    "title": "pro1",
                    "description": "second proposal",
                    "type": "0x4",
                    "value": {
                        "value": "1234"
                    }
                },
                "vote": {
                    "agree": {
                        "count": "0x0",
                        "amount": "0x0"
                    },
                    "disagree": {
                        "count": "0x1",
                        "amount": "0xbecc41ad16b07a7600000"
                    },
                    "noVote": {
                        "count": "0x15",
                        "amount": "0xfa6c16332dc7a0bae00000"
                    }
                }
            }
        ]
    },
    "id": 1234
}

Preptools Common commands

Commands that generate configuration file and keystore file. There are two commands keystore and genconf.

keystore

Description

Create a keystore file in the given path.

Usage

usage: preptools keystore [-h] [-p PASSWORD] path

positional arguments:
  path                  Path of keystore file.

optional arguments:
  -h, --help            show this help message and exit
  -p PASSWORD, --password PASSWORD
                        Keystore file's password

Options

shorthand, Name default Description
path a keystore file path that is to be generated
-h, --help show this help message and exit
-p, --password Keystore file's password

Examples

(venv) $ preptools keystore keystore_file
Input your keystore password:
Retype your keystore password:
Made file successfully

genconf

Description

Generate P-Rep tools config file.

usage: preptools genconf [-h] [--path PATH]

optional arguments:
  -h, --help   show this help message and exit
  --path PATH  Path of configue file. default(./preptools_config.json)

Options

shorthand, Name default Description
-h, --help show this help message and exit
--path preptools_config.json Path of configue file.

Examples

(venv) $ preptools genconf
Made ./preptools_config.json successfully

Preptools Other commands

Commands that are related to transaction. There are two commands txresult and txbyhash.

txresult

Description

Get transaction result by transaction hash.

Usage

usage: preptools txresult [-h] [--url URL] [--nid NID] [--config CONFIG]
                          [tx_hash]

positional arguments:
  tx_hash               Enter the transaction hash

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path

Options

shorthand, Name default Description
tx_hash Hash of the transaction to be queried
-h, --help show this help message and exit
-u, --url http://127.0.0.1:9000/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path

Examples

(venv) $ preptools txresult 0xc8456053128897a0941dab4c79428db91dda5a2899e3813698146ac25808c4c9
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "txHash": "0xc8456053128897a0941dab4c79428db91dda5a2899e3813698146ac25808c4c9",
        "blockHeight": "0x1d980",
        "blockHash": "0xa7354fb9427308239e56482916dd4e31988ce1f207091cdf81c656f89a066c5f",
        "txIndex": "0x0",
        "to": "cx0000000000000000000000000000000000000000",
        "stepUsed": "0x21340",
        "stepPrice": "0x2540be400",
        "cumulativeStepUsed": "0x21340",
        "eventLogs": [
            {
                "scoreAddress": "cx0000000000000000000000000000000000000000",
                "indexed": [
                    "PRepSet(Address)"
                ],
                "data": [
                    "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6"
                ]
            }
        ],
        "logsBloom": "0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000008000000000000000000000000080000000000000000000000000000000000000000000000000000000000020000000000000008000000000000000000000000000000000000080000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
        "status": "0x1"
    },
    "id": 1234
}

txbyhash

Description

Get transaction by transaction hash

Usage

usage: preptools txbyhash [-h] [--url URL] [--nid NID] [--config CONFIG]
                          [tx_hash]

positional arguments:
  tx_hash               Enter the transaction hash

optional arguments:
  -h, --help            show this help message and exit
  --url URL, -u URL     node url default(http://127.0.0.1:9000/api/v3)
  --nid NID, -n NID     networkId default(3) ex) mainnet(1), testnet(2)
  --config CONFIG, -c CONFIG
                        preptools config file path

Options

shorthand, Name default Description
tx_hash Hash of the transaction to be queried
-h, --help show this help message and exit
-u, --url http://127.0.0.1:9000/api/v3 node url
-n, --nid 3 network id
-c, --config ./preptools_config.json preptools config file path

Examples

(venv) $ preptools txbyhash 0xc8456053128897a0941dab4c79428db91dda5a2899e3813698146ac25808c4c9
request success.
[Response] =====================================================================
{
    "jsonrpc": "2.0",
    "result": {
        "version": "0x3",
        "from": "hxef73db5d0ad02eb1fadb37d0041be96bfa56d4e6",
        "to": "cx0000000000000000000000000000000000000000",
        "stepLimit": "0x10000000",
        "timestamp": "0x58fa97a48ad43",
        "nid": "0x3",
        "value": "0x0",
        "dataType": "call",
        "data": {
            "method": "setPRep",
            "params": {
                "name": "kokoa node",
                "country": "USA",
                "website": "https://icon.kokoa.com",
                "details": "https://icon.kokoa.com/json",
                "p2pEndpoint": "node.example.com:7100"
            }
        },
        "signature": "4krblW9KtQr6KNIJOVa22B3JFDQD6vaxepDSjMET91oua3Qeiq3UFMIHiucWiIrKGt3zaSo2K+mVW7Ge5rOtPwE=",
        "txHash": "0xc8456053128897a0941dab4c79428db91dda5a2899e3813698146ac25808c4c9",
        "txIndex": "0x0",
        "blockHeight": "0x1d980",
        "blockHash": "0xa7354fb9427308239e56482916dd4e31988ce1f207091cdf81c656f89a066c5f"
    },
    "id": 1234
}

Configuration Files

preptools_config.json

For every P-Rep tools CLI commands except genconf and keystore, this file is used to configure the default parameters and initial settings.

In this configuration file, you can define default options values for some CLI commands.

{
    "uri": "http://127.0.0.1:9000/api/v3",
    "nid": 3,
    "keyStore": null
}
Field Data type Description
uri string URI to send the request.
nid int Network ID. 3 is reserved for P-Rep tools.
keyStore string Keystore file path.

JSON Standard for Public Representative Detailed Information

This is the JSON standard for detailed information about the P-Rep. P-Rep can submit the url of detailed information via the registerPRep and setPRep action on the ICON Blockchain. We strongly recommend that you register this information.

{
    "representative": {
        "logo": {
            "logo_256": "https://icon.foundation/img/img-256.png",
            "logo_1024": "https://icon.foundation/img/img-1024.png",
            "logo_svg": "https://icon.foundation/img/img-logo.svg"
        },
        "media": {
            "steemit": "",
            "twitter": "",
            "youtube": "",
            "facebook": "",
            "github": "",
            "reddit": "",
            "keybase": "",
            "telegram": "",
            "wechat": ""
        }
    },
    "server": {
        "location": {
            "country": "",
            "city": ""
        },
        "server_type": "",
        "api_endpoint": ""
    }
}
  • representative: Basic information of Public Representative
    • logo: Logo images of P-Rep
      • logo_256: image 256x256px
      • logo_1024: image 1024x1024px
      • logo_sgv: image svg
    • media: URL and username of social media
      • steemit: Steemit URL
      • twitter: Twitter URL
      • youtube: Youtube URL
      • Facebook: Facebook URL
      • github: Github URL
      • reddit: Raddit URL
      • keybase: Username
      • telegram: Username
      • wechat: Username
  • server: Server information of Public Representative
    • location: Server location
      • name: Node location in human readable format [City, State]
      • country: Node country code [XX]
    • server_type: Type of server ‘cloud, on-premise, hybrid’
    • api_endpoint: HTTP endpoint http://host:port

How to use

Create a JSON file and upload it to your domain server. When you call the registerPRep or setPRepfunction, input the url of this file into the details field.

References

License

This project follows the Apache 2.0 License. Please refer to LICENSE for details.

Project details

Verified details

These details have been verified by PyPI
Maintainers
Avatar for iconfoundation from gravatar.com iconfoundation Avatar for iconloop from gravatar.com iconloop

Unverified details

These details have not been verified by PyPI
Project links
GitHub Statistics

View statistics for this project via Libraries.io, or by using our public dataset on Google BigQuery

Meta

License: Apache Software License (Apache License 2.0)

Author: ICON Foundation

Classifiers

Release history Release notifications | RSS feed

1.3.2

1.3.1

1.3.0

1.2.4

1.2.3

1.2.2

1.2.1

1.2.0

This version

1.1.0

1.0.11

1.0.10

1.0.8

1.0.7

1.0.6

1.0.5

1.0.4

1.0.3

1.0.2

1.0.1

1.0.0

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distributions

No source distribution files available for this release.See tutorial on generating distribution archives.

Built Distribution

preptools-1.1.0-py3-none-any.whl (33.6 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page