pyIndego 0.7.28

API for Bosch Indego mower

API for Bosch Indego lawnmowers

Usage with Home Assistant

For source files and version handling: https://github.com/jm-73/pyIndego

For PYPI package: https://pypi.org/project/pyIndego/

Basic information needed

Information	Description
your_username	Your username in the BoschSmartMove app
your_password	Your password for the app
your_serial	Your Bosch Indego serial (found on the mover, in the mover menu or in the app)

The python library is written for the login method with username (email address) and password. Login with Facebook account is not supported.

Call the API and the mower

Call the API:

IndegoApi_Instance = IndegoAPI(username=[e-mail], password=your_password, serial=your_serial)

get-functions

Description for the functions updating data from API and mower. The functions collecting data from only Bosch API does not wake up mower. Functions collecting data from both Bosch API and mower does wake up mower from sleeping.

API Call	Bosch API	Mower	Mower needs to be online
getAlerts	X
getGenericData	X
getLastComletedCutting	X
getOperatingData		X	X
getState	X
getUpdates		X	X
getUsers	X
login	X

List of get-functions

getAlerts()

Collect alerts.

Response:
{
    'alm_sn': '123456789', 
    'alert_id': '5d48171263c5345a75dbc017', 
    'error_code': 'ntfy_blade_life', 
    'headline': 'Underhållstips.', 
    'date': '2019-08-05T11:46:26.397Z', 
    'message': 'Kontrollera klippknivarna. Indego har klippt i 100 timmar. Ska den fungera optimalt, kontrollera klippknivarna så att de är i bra skick. Du kan beställa nya knivar via avsnittet Tillbehör.', 
    'read_status': 'unread', 
    'flag': 'warning', 
    'push': True
}

getGenericData()

Collect serial, service counter, name, mowing mode, model number and firmware.

Response:
{
    'alm_sn': '123456789', 
    'alm_name': 'Indego', 
    'service_counter': 60488, 
    'needs_service': False, 
    'alm_mode': 'manual', 
    'bareToolnumber': '3600HA2300', 
    'alm_firmware_version': '00837.01043'
}

getNextcutting()

Collects data on next cutting. Seems to get the last command sent to the mower.

Response:
{
    'lastMowSent': '2019-08-20T05:09:51.842+01:00',
    'lastMowCode': 200
}

getOperatingData()

Collect operational data data: battery, runtime, garden data and temperature.

Response:
{
    'runtime': {
        'total': {
            'operate': 86333, 
            'charge': 25845
        }, 
        'session': {
            'operate': 0, 
            'charge': 0
        }
    }, 
    'battery': {
        'voltage': 33.5, 
        'cycles': 1, 
        'discharge': 0.0, 
        'ambient_temp': 17, 
        'battery_temp': 17, 
        'percent': 335
    }, 
    'garden': {
        'id': 7, 
        'name': 1, 
        'signal_id': 1, 
        'size': 625, 
        'inner_bounds': 3, 
        'cuts': 26, 
        'runtime': 82197, 
        'charge': 24860, 
        'bumps': 4650, 
        'stops': 24, 
        'last_mow': 4
    }, 
    'hmiKeys': 1344
}

getState()

Collects state of mower, % lawn mowed, position, runtime, map coordinates.

Response:
{
    'state': 64513, 
    'map_update_available': True, 
    'mowed': 95, 
    'mowmode': 0, 
    'xPos': 68, 
    'yPos': 30, 
    'runtime': {
        'total': {
            'operate': 86327, 
            'charge': 25845
            }, 
        'session': {
            'operate': 4, 
            'charge': 0
            }
        }, 
    'mapsvgcache_ts': 1565381013023, 
    'svg_xPos': 928, 
    'svg_yPos': 264
}

getUpdates()

Check if there are any updates apllicable to the mower.

Response:
{
     'available': False
}

getUsers()

Collect user data.

Response:
{
    'email': '[e-mail]', 
    'display_name': 'Indego', 
    'language': 'sv', 
    'country': 'GB', 
    'optIn': True, 
    'optInApp': True
}

Functions for reading data from locally cached API data

All functions that doesnt contain "get" first in name is collecting data from locally stored variables. No API calls to Bosch or mower.

AlertsCount()

Counts the current alarms on mower.

Response:
1

AlertsDescription()

Get detailed list of alerts

Response:
[
    {
        'alm_sn': '505703041', 
        'alert_id': '5d5c395c63c5346994440e60', 
        'error_code': 'ntfy_blade_life', 
        'headline': 'Underhållstips.', 
        'date': '2019-08-20T18:18:04.472Z', 
        'message': 'Kontrollera klippknivarna. Indego har klippt i 100 timmar. Ska den fungera optimalt, kontrollera klippknivarna så att de är i bra skick. Du kan beställa nya knivar via avsnittet Tillbehör.', 
        'read_status': 'unread', 
        'flag': 'warning', 
        'push': True
    } 
]

AlmFirmwareVersion()

Gets the mower firmware version.

Response:
smart

AlmMode()

Gets the mower mode.

Response:
smart

AlmName()

Gets the mower instance name.

Response:
Indego

BareToolNumber()

Show the model number of the mower.

Response:
3600HA2300

Battery()

Get battery information.

Response:
???

BatteryPercent()

Get the raw value for percentage left. For Gen 1 this seems to be the battery voltage. For Gen 2 mowers it seems to be the actual percentage left in the battery.

Response:
???

BatteryPercentAdjusted()

Get the adjusted value for percentage left. Calculated for Gen 1 mowers, and the actual percentage value for Gen 2.

Response:
85

BatteryVoltage()

Get the voltage for the battery. For Gen 1 mowers this value seems to be correct. For Gen 2 it seems to be the same value as the percentage left in battery.

Response:
38.6

BatteryCycles()

Dont know what this value is?

Response:
0

BatteryDischarge()

Seems to be the Ah the mower is currently drawing.

Response:
1.2

BatteryAmbientTemp()

Seems to be the ambient temp of the battery.

Response:
28

BatteryTemp()

Seems to be the temp of the battery.

Response:
29

Country()

Show country for the Bosch account.

Response:
GB

Displayname()

Show name for the Bosch account.

Response:
mowername

Email()

Show email adress for the Bosch account.

Response:
[e-mail]

FriendlyAlertErrorCode()

Get user friendly alert error code description to be shown in HA GUI.

Response:
Reminder blade life

Garden()

Dont know what this is?

Response:
{
    'garden': {
        'id': 7, 
        'name': 1, 
        'signal_id': 1, 
        'size': 625, 
        'inner_bounds': 3, 
        'cuts': 26, 
        'runtime': 82197, 
        'charge': 24860, 
        'bumps': 4650, 
        'stops': 24, 
        'last_mow': 4
    }
} 

HmiKeysn()

Dont know what this is?

Response:
1344

Language()

Show language for the Bosch account.

Response:
sv

MapSvgCacheTs()

Dont know what this is...

Response:
1565416077642

MapUpdateAvailable()

Show if there is an update of the map image.

Response:
True

ModelDescription()

Get user friendly model name.

Response:
Indego Connect 1000

ModelVoltage()

Get the predefined voltage limits in order to calculate battery percentage.

Response:
{
    'min': '297',
    'max': '369'
}

ModelVoltageMin()

Get the minimum predefined voltage limits in order to calculate battery percentage.

Response:
297

ModelVoltageMax()

Get the maximum predefined voltage limits in order to calculate battery percentage.

Response:
369

Mowed()

Show percentage of lawn mowed

Response:
95

MowerState()

Show current state of mower

Response:
258

MowerStateDescription()

Show simple description of current state of mower. States available are Docked, Mowing, Stuck, Diagnostics mode, End of life, Software update.

Response:
Docked

MowerStateDescriptionDetailed()

Show description in detail of current state of mower.

Response:
Sleeping

MowingModeDescription()

Get the user friendly mowing mode description.

Response:
Smart

NeedsService()

Gets the needs service flag. Dont know when it is used.

Response:
False

NextCutting()

Should get the next planned cutting session. Seems to give the last sent mower command.

Response:
{
    'lastMowSent': '2019-08-20T05:09:51.842+01:00', 
    'lastMowCode': 200
}

OptIn()

Dont know what this are for?

Response:
True

OptInApp()

Dont know what this are for?

Response:
True

Runtime()

Get session and total rutime and charge time in minutes.

Response:
{
    'total': {
        'operate': 86389, 
        'charge': 25891
    }, 
    'session': {
        'operate': 0, 
        'charge': 0
    }
}

RuntimeSession()

Get session runtime and charge time in minutes

Response:
{
    'operate': 4, 
    'charge': 1
}

RuntimeTotal()

Get total runtime and charge time in hours

Response:
{
    'operate': 86389, 
    'charge': 25891
}

Serial()

Get the serial number

Response:
123456789

ServiceCounter()

Get service counter for knives

Response:
73275

SvgxPos()

Show svg x-position of mower.

Response:
928

FirmwareAvailable()

Checks if there are any firmware updates available for the mower.

Response:
false

SvgyPos()

Show svg y-position of mower.

Response:
264

xPos()

Show x-position of mower.

Response:
85

yPos()

Show y-position of mower.

Response:
48

Sending commands

putCommand(command)

Send command. Accepted commands:

Command	Description
mow	Start mowing
pause	Pause mower
returnToDock	Return mower to dock

Not working

Not properly implemented yet

getLocation()

Get garden location (GPS coordinates?)

getPredicitiveCalendar()

Get the calender for predicted cutting sessions

getUserAdjustment()

Get the user adjustment of the cutting frequency

getCalendar()

Get the calendar for allowed cutting times

getSecurity()

Get the security settings

getAutomaticUpdate()

Get the automatic update settings

API CALLS

https://api.indego.iot.bosch-si.com:443/api/v1

get
/authenticate
/alerts
/alms/<serial>
/alms/<serial>/automaticUpdate
/alms/<serial>/updates
/alms/<serial>/calendar
/alms/<serial>/map
/alms/<serial>/operatingData
/alms/<serial>/predictive/nextcutting?withReason=true
/alms/<serial>/predictive/nextcutting?last=YYYY-MM-DDTHH:MM:SS%2BHH:MM (Not working)
/alms/<serial>/predictive/location
/alms/<serial>/predictive/calendar
/alms/<serial>/predictive/useradjustment (What is this for?)
/alms/<serial>/security
/alms/<serial>/state

put