pyW215 0.5

Interface for d-link W215 Smart Plugs.

pyW215
======

pyW215 is a python3 library for interfacing with the d-link W215 Smart
Plug.

The library is largely inspired by the javascript implementation by
@bikerp `dsp-w215-hnap`_.

Usage
=====

.. code:: python

#!python3
from pyW215.pyW215 import SmartPlug, ON, OFF

sp = SmartPlug('192.168.1.110', '******')
# Where ****** is the "code pin" printed on the setup card

# Get values if available otherwise return N/A
print(sp.current_consumption)
print(sp.temperature)
print(sp.total_consumption)

# Turn switch on and off
sp.state = ON
sp.state = OFF

Note: You need to know the IP and password of you device. The password
is written on the side.

Working firmware versions
=========================

- v2.02
- v2.03
- v2.22

Note: If you experience problems with the switch first try upgrading to
the latest supported firmware through the D-Link app. If the problem
persists feel free to open an issue about the problem.

Partial support
---------------

- v1.24 (State changing and current consumption working, but no support
for reading temperature)
- D-Link W110 smart switch D-Link W110 smart switch (only state viewing
and changing is supported)

If you have it working on other firmware or hardware versions please let
me know.

.. _dsp-w215-hnap: https://github.com/bikerp/dsp-w215-hnap