pyW215 0.5.1

Interface for d-link W215 Smart Plugs.

pyW215

pyW215 is a python3 library for interfacing with the d-link W215 Smart Plug.

The library is largely inspired by the javascript implementation by @bikerp dsp-w215-hnap.

Usage

#!python3
from pyW215.pyW215 import SmartPlug, ON, OFF

sp = SmartPlug('192.168.1.110', '******')
# Where ****** is the "code pin" printed on the setup card

# Get values if available otherwise return N/A
print(sp.current_consumption)
print(sp.temperature)
print(sp.total_consumption)

# Turn switch on and off
sp.state = ON
sp.state = OFF

Note: You need to know the IP and password of your device. The password is written on the side.

Working firmware versions

• v2.02

• v2.03

• v2.22

Note: If you experience problems with the switch upgrade to the latest supported firmware through the D-Link app. If the problem persists feel free to open an issue about the problem.

Partial support

• v1.24 (State changing and current consumption working, but no support for reading temperature)

• D-Link W110 smart switch D-Link W110 smart switch (only state viewing and changing is supported)

If you have it working on other firmware or hardware versions please let me know.