Skip to main content

Pybricks developer tools

Project description

Pybricks tools & interface library

This is a package with tools for Pybricks developers. For regular users we recommend the Pybricks Code web IDE.

This package contains both command line tools and a library to call equivalent operations from within a Python script.

Installation

Python Runtime

We currently only support Python 3.8.x. (Newer versions are not supported yet for technical reasons.)

Command Line Tool

We recommend using pipx to install pybricksdev as a command line tool.

Be sure to install pipx in the Python 3.8 runtime:

python3.8 -m pip install --upgrade pip # ensure pip is up to date first
python3.8 -m pip install pipx

If this is the first time you have installed pipx, run this command:

python3.8 -m pipx ensurepath

This will make it so that tools installed with pipx are in your PATH. You will need to restart any terminal windows for this to take effect. If that doesn't work, try logging out and logging back in.

Then use pipx to install pybricksdev:

python3.8 -m pipx install pybricksdev

Windows users

If you are using the Python Launcher for Windows (installed by default with the official Python installer), then you will need to use py -3.8 instead of python3.8.

py -3.8 -m pip install --upgrade pip # ensure pip is up to date first
py -3.8 -m pip install pipx
py -3.8 -m pipx ensurepath
py -3.8 -m pipx install pybricksdev

Linux USB

On Linux, udev rules are needed to allow access via USB. The pybricksdev command line tool contains a function to generate the required rules. Run the following:

pybricksdev udev | sudo tee /etc/udev/rules.d/99-pybricksdev.rules

Library

To install pybricksdev as a library, we highly recommend using a virtual environment for your project. Our tool of choice for this is poetry:

poetry env use python3.8
poetry add pybricksdev

Of course you can always use pip as well:

pip install pybrickdev --pre

Using the Command Line Tool

The following are some examples of how to use the pybricksdev command line tool. For additional info, run pybricksdev --help.

Flashing Pybricks MicroPython firmware

Make sure the hub is off. Press and keep holding the hub button, and run:

pybricksdev flash ../pybricks-micropython/bricks/technichub/build/firmware.zip

Replace the example path with the path to the firmware archive. Decrease the delay d between data packages for faster transfer. Increase the delay if it fails.

You may release the button once the progress bar first appears.

The SPIKE Prime Hub and MINDSTORMS Robot Inventor Hub do not have a Bluetooth bootloader. It is recommended to install Pybricks using a Python script that runs on the hub. You can also flash the firmware manually using DFU.

Running Pybricks MicroPython programs

This compiles a MicroPython script and sends it to a hub with Pybricks firmware.

pybricksdev run --help

#
# ble connection examples:
#

# Run a one-liner on a Pybricks hub
pybricksdev run ble "Pybricks Hub" "print('Hello!'); print('world!');"

# Run script on the first device we find called Pybricks hub
pybricksdev run ble "Pybricks Hub" demo/shortdemo.py

# Run script on device with address 90:84:2B:4A:2B:75 (doesn't work on Mac)
pybricksdev run ble 90:84:2B:4A:2B:75 demo/shortdemo.py

#
# Other connection examples:
#

# Run script on ev3dev at 192.168.0.102
pybricksdev run ssh 192.168.0.102 demo/shortdemo.py

# Run script on primehub at
pybricksdev run usb "Pybricks Hub" demo/shortdemo.py

Compiling Pybricks MicroPython programs without running

This can be used to compile programs. Instead of also running them as above, it just prints the output on the screen instead.

pybricksdev compile demo/shortdemo.py

pybricksdev compile "print('Hello!'); print('world!');"

This is mainly intended for developers who want to quickly inspect the contents of the .mpy file. To get the actual file, just use mpy-cross directly. We have used this tool in the past to test bare minimum MicroPython ports that have neither a builtin compiler or any form of I/O yet. You can paste the generated const uint8_t script[] directly ito your C code.

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

pybricksdev-1.0.0a3.tar.gz (172.3 kB view hashes)

Uploaded Source

Built Distribution

pybricksdev-1.0.0a3-py3-none-any.whl (175.5 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page