pydobotplus 0.1.1

Python library for Dobot Magician upgraded

pydobotplus

An extended Python library for controlling the Dobot Magician.

Installation

Install the driver from Silicon Labs.

pip install pydobotplus

Example

from serial.tools import list_ports
from pydobotplus import Dobot, CustomPosition

port = list_ports.comports()[0].device
device = Dobot(port=port)

# Create a custom position
pos1 = CustomPosition(x=200, y=50, z=50)

# Move using direct coordinates
device.move_to(x=200, y=50, z=50)

# Move using custom position
device.move_to(position=pos1)

# Control the conveyor belt
device.conveyor_belt(speed=0.5, direction=1)
device.conveyor_belt_distance(speed_mm_per_sec=50, distance_mm=200, direction=1)

device.close()

Methods

• Dobot(port, verbose=False) Creates an instance of Dobot connected to the given serial port.

  • port: string with name of serial port to connect
  • verbose: bool will print to console all serial communications

• .get_pose() Returns the current pose of the Dobot, as a Pose named tuple (position and joints).

  • position: Position with (x, y, z, r) coordinates
  • joints: Joints with (j1, j2, j3, j4) angles

• .move_to(x=None, y=None, z=None, r=0, wait=True, mode=None, position=None) Queues a translation for the Dobot to the given coordinates or a Position object, keeps any unspecified parameters the same.

  • x: float x cartesian coordinate to move
  • y: float y cartesian coordinate to move
  • z: float z cartesian coordinate to move
  • r: float r effector rotation
  • wait: bool waits until the command has been executed before returning to the process - DO NOT TOUCH UNLESS YOU KNOW WHAT YOU ARE DOING
  • mode: MODE_PTP movement mode (default is MODE_PTP.MOVJ_XYZ) - DO NOT TOUCH UNLESS YOU KNOW WHAT YOU ARE DOING
  • position: Position object with (x, y, z, r) coordinates

• .move_rel(x=0, y=0, z=0, r=0, wait=True) Moves the Dobot relative to its current position, keeps any unspecified parameters the same.

  • x: float relative x coordinate
  • y: float relative y coordinate
  • z: float relative z coordinate
  • r: float relative r rotation
  • wait: bool waits until the command has been executed before returning to the process

• .speed(velocity, acceleration) Changes the velocity and acceleration at which the Dobot moves to future coordinates.

  • velocity: float desired translation velocity
  • acceleration: float desired translation acceleration

• .suck(enable) Enables or disables suction.

  • enable: bool enables/disables suction

• .grip(enable) Enables or disables the gripper.

  • enable: bool enables/disables gripper

• .get_alarms() Returns a set of current alarms.

  • returns: set of Alarm enums

• .clear_alarms() Clears all current alarms.

• CustomPosition(x=None, y=None, z=None, r=None) Initializes a custom position object.

  • x: float x coordinate
  • y: float y coordinate
  • z: float z coordinate
  • r: float effector rotation - NOT USED ON MAGICIAN

• MODE_PTP Enum class for various PTP modes such as JUMP_XYZ, MOVJ_XYZ, MOVL_XYZ, etc. - DO NOT TOUCH UNLESS YOU KNOW WHAT YOU ARE DOING

• DobotException Custom exception class for handling Dobot-related errors.

• .set_color_sensor(enable=True, version=1) Enables or disables the color sensor.

  • enable: bool enables/disables the sensor
  • version: int sensor version

• .get_color() Returns the RGB values detected by the color sensor.

  • returns: list with RGB values

• .set_ir(enable=True, port=PORT_GP4) Enables or disables the IR sensor on the specified port.

  • enable: bool enables/disables the sensor
  • port: int port number

• .get_ir(port=PORT_GP4) Returns the state of the IR sensor on the specified port.

  • port: int port number
  • returns: bool state of the sensor

• .conveyor_belt(speed, direction=1, interface=0) Sets the speed and direction of the conveyor belt.

  • speed: float speed of the conveyor belt (range: 0.0 to 1.0)
  • direction: int direction of the conveyor belt (1 for forward, -1 for backward)
  • interface: int motor interface (default is 0)

• .conveyor_belt_distance(speed_mm_per_sec, distance_mm, direction=1, interface=0) Moves the conveyor belt at a specified speed for a specified distance.

  • speed_mm_per_sec: float speed in millimeters per second (must be <= 100)
  • distance_mm: float distance in millimeters
  • direction: int direction of the conveyor belt (1 for forward, -1 for backward)
  • interface: int motor interface (default is 0)