pyedbglib 2.18.2.75

Low-level protocol library for communicating with Microchip CMSIS-DAP based debuggers

pyedbglib - Python EDBG protocol library

pyedbglib is a low-level protocol library for communicating with Microchip CMSIS-DAP based debuggers

Usage

pyedbglib is a library which can be used by Python applications to communicate with Microchip microcontrollers via Microchip CMSIS-DAP based debuggers.

The protocol is documented in the EDBG communication protocol.

Supported debuggers

pyedbglib supports:

• PKOB nano (nEDBG) - on-board debugger on Curiosity Nano
• MPLAB PICkit 4 In-Circuit Debugger (when in 'AVR mode')
• MPLAB Snap In-Circuit Debugger (when in 'AVR mode')
• Atmel-ICE
• Power Debugger
• EDBG - on-board debugger on Xplained Pro/Ultra
• mEDBG - on-board debugger on Xplained Mini/Nano
• JTAGICE3 (firmware version 3.0 or newer)

Note: Each debugger may implement a subset of protocols and commands.

Example

"""
Example usage of pyedbglib to read debugger firmware version and target voltage
"""
from pyedbglib.hidtransport.hidtransportfactory import hid_transport
from pyedbglib.protocols.housekeepingprotocol import Jtagice3HousekeepingProtocol
from pyedbglib.version import VERSION as pyedbglib_version

# Report library version
print("pyedbglib version {}".format(pyedbglib_version))

# Make a connection using HID transport
transport = hid_transport()
transport.connect()

# Create a housekeeper
housekeeper = Jtagice3HousekeepingProtocol(transport)
housekeeper.start_session()

# Read out debugger firmware version
major = housekeeper.get_byte(Jtagice3HousekeepingProtocol.HOUSEKEEPING_CONTEXT_CONFIG,
                             Jtagice3HousekeepingProtocol.HOUSEKEEPING_CONFIG_FWREV_MAJ)
minor = housekeeper.get_byte(Jtagice3HousekeepingProtocol.HOUSEKEEPING_CONTEXT_CONFIG,
                             Jtagice3HousekeepingProtocol.HOUSEKEEPING_CONFIG_FWREV_MIN)
build = housekeeper.get_le16(Jtagice3HousekeepingProtocol.HOUSEKEEPING_CONTEXT_CONFIG,
                             Jtagice3HousekeepingProtocol.HOUSEKEEPING_CONFIG_BUILD)
print ("Debugger firmware is version {}.{}.{}".format(major, minor,build))

# Read out target voltage
target_voltage = housekeeper.get_le16(Jtagice3HousekeepingProtocol.HOUSEKEEPING_CONTEXT_ANALOG,
                                      Jtagice3HousekeepingProtocol.HOUSEKEEPING_ANALOG_VTREF)
print ("Target voltage is {:.02f}V".format(target_voltage/1000.0))

# Tear down
housekeeper.end_session()
transport.disconnect()

Notes for Linux® systems

HIDAPI needs to build using packages: libusb-1.0.0-dev, libudev-dev

USB devices need udev rules to be added to a file in /etc/udev/rules.d

Example of udev rules for supported debuggers:

# HIDAPI/libusb:

# JTAGICE3
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2140", MODE="0666"
# Atmel-ICE
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2141", MODE="0666"
# Power Debugger
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2144", MODE="0666"
# EDBG - debugger on Xplained Pro
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2111", MODE="0666"
# mEDBG - debugger on Xplained Mini
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2145", MODE="0666"
# PKOB nano (nEDBG) - debugger on Curiosity Nano
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2175", MODE="0666"
# MPLAB PICkit 4 In-Circuit Debugger
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2177", MODE="0666"
# MPLAB Snap In-Circuit Debugger
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2180", MODE="0666"

pyedbglib also provides helper functions for accessing serial ports. The user has to be part of the 'dialout' group to allow this. This can be done by executing:

sudo adduser $USER dialout

It may also be necessary to grant read+write permission to the port, for example:

sudo chmod a+rw /dev/ttyACM0