Skip to main content

A Python packer to run anywhwere any project with any virtualenv dependencies.

Project description

PyEmpaq

A simple but powerful Python packer to run any project with any virtualenv dependencies anywhwere.

With PyEmpaq you can convert any Python project (see limitations below) into a single .pyz file with all the project's content packed inside.

Packing is super simple, see this demo:

pack-demo

That single file is everything that needs to be distributed. When the final user executes it, the original project will be expanded, its dependencies installed in a virtualenv, and then executed. Note that no special permissions or privileges are required, as everything happens in the user environment.

See that in action:

run-demo

Both the packaging and the execution are fully multiplatorm. This means that you can pack a project in Linux, Windows, Mac or whatever, and it will run ok in Linux, Windows, Mac or whatever. The only requirement is Python to be already installed.

You can try yourself some packed with PyEmpaq examples, very easy, just download any of these files and run it with Python:

logo

You can install pyempaq directly from PyPI; see instructions below.

PyEmpaq is security friendly, there is nothing obscure or secretly shipped when you distribute your project with it: anybody can just open the pyz file (it's just a ZIP) and inspect it.

It's also safe regarding licenses when distributing your packed software. Unlike packing mechanisms that rely on putting inside a big blob, with PyEmpaq you don't have to worry about the licenses of your software dependencies (and the dependencies' dependencies) in regard to distributing them.

Limitations:

There are some limitations:

  • Only Python >= 3.7 is supported

  • Only Linux, Windows and Mac is supported

  • Only pip-installable dependencies are supported (from PyPI or whatever).

  • Only dependencies that are pure Python or provide wheels are supported.

All this means that the most majority of the projects could be packed and run by PyEmpaq. If you have any ideas on how to overcome any of these limitations, let's talk!

How does this work?

There are two phases: packing and execution.

The packing phase is executed by the project developer, only once, before distribution. It's a simple step where the developer runs PyEmpaq indicating all needed info, and PyEmpaq will produce a single <projectname>.pyz file. That's all, and that only file is what is needed for distribution.

In this packing phase, PyEmpaq builds the indicated packed file, putting inside:

  • the payload project, with all the indicated modules and binary files

  • an unpacker script from PyEmpaq, which will be run during the execution phase

  • few more stuff: some needed infrastructure details for the .pyz to run correctly

After packing, the developer will distribute the packed file, final users will download/receive/get it, and execute it.

In the execution phase all that needs to be done by the final user is to run it using Python, which can be done from the command line (e.g. python3 supergame.pyz) or by doing double click from the file explorer in those systems that relate the .pyz extension to Python (e.g. Windows).

In this execution phase, the unpacker script put by PyEmpaq inside the packed file will be run, running the following steps:

  • check if the needed setup exists from a previous run; if yes, it will just run the payload project with almost no extra work; otherwise...

  • create a directory in the user data dir (or the indicated one, see below), and expand the .pyz file there

  • create a virtualenv in that new directory, and install all the payload's project dependencies

  • run the payload's project inside that virtualenv

The verification that the unpacker does to see if has a reusable setup from the past is based on the .pyz timestamp; if it changed (a new file was distributed), a new setup will be created and used.

The environment variable PYEMPAQ_UNPACK_BASE_PATH can be used to specify in which base directory PyEmpaq will unpack the different projects. If indicated, the path must exist and be a directory.

PyEmpaq transparently returns the payload's exit code except when it must exit before the execution of the payload. In that case, it uses special codes equal or above 64, meaning:

  • 64: unpack-restrictions are not met on the final user's system.
  • 65: the indicated PYEMPAQ_UNPACK_BASE_PATH does not exist
  • 66: the indicated PYEMPAQ_UNPACK_BASE_PATH is not a directory

Command line options

There is one mandatory parameter:

  • source: it needs to point the configuration file or to the directory where the configuration will be located (it will be searched by its default name pyempaq.yaml).

Examples:

  • pyempaq .

  • pyempaq /data/project/

  • pyempaq ~/repo/proj/config.yaml

You can control verbosity by adding these command line parameters to control logging levels:

  • -v, --verbose - Show detailed information, typically of interest only when diagnosing problems.
  • -q, --quiet - Only events of WARNING level and above will be tracked.

All that said, there is an special option -V, --version (new in v0.3) that if used will just print the version and exit.

Note In the execution phase, if you have an environment variable PYEMPAQ_DEBUG=1 it will show the Pyempaq log lines during the execution.

The configuration file

All the information that PyEmpaq needs to pack a project comes from a configuration file, which the developer would normally have in the project itself.

The following is the structure of the pyempaq.yaml configuration file:

  • name [mandatory]: the name of the project.

  • basedir [optional]: the project's base directory; if not included it defaults to where the configuration file is located.

  • exec [mandatory]: the section where is defined the information to execute the project once unpacked; it holds different subkeys (some subkeys are marked with †: ONE of those keys must be present, but only ONE):

    • script [†]: the filepath of the python script to run; when unpacking PyEmpaq will do python3 SCRIPT.

    • module [†]: the name of the module to invoke; when unpacking PyEmpaq will do python3 -m MODULE.

    • entrypoint [†]: freeform, as a list of strings; when unpacking PyEmpaq will only insert the proper python3 at the beginning: python3 STR1 STR2 ....

    • default-args [optional]: the default arguments to be passed to the script/module/entrypoint (if not overridden when the distributed .pyz is executed).

  • requirements [optional]: a list of filepaths pointing to the requirement files with pip-installable dependencies.

  • dependencies [optional]: a list of strings to directly specify packages to be installed by pip without needing to have a requirement file.

  • include [optional, new in v0.3]: a list of strings, each one specifying a pattern to decide what files and directories to include in the pack (see below); if not included it defaults to ["./**"] which means all the files and directories in the project.

  • exclude [optional, new in v0.3]: a list of strings, each one specifying a pattern to decide what files and directories to exclude from the pack (see below).

  • unpack-restrictions [optional, new in v0.3]: a section to specify different restrictions to be verified/enforced during unpack.

    • minimum-python-version [optional, new in v0.3]: a string specifying the minimum version possible to run correctly.

All specified filepaths must exist inside the project and must be relative (to the project's base directory), with the exception of basedir itself which can be absolute or relative (to the configuration file location).

Both include and exclude options use pattern matching according to the rules used by the Unix shell, using *, ?, and character ranges expressed with []. Also ** will match any files and zero or more directories. For more information or subtleties check the glob.glob documentation.

Note that the final user may ignore/bypass any unpack restrictions using the PYEMPAQ_IGNORE_RESTRICTIONS environment variable with a value of comma-separated names of which restrictions to ignore.

The following are examples of different configuration files (which were the ones used to build the packed examples mentioned before):

Context of the project being run

When the packed script/module/whatever is run in the unpacking phase, it will be executed inside the virtualenv with the needed requirements/dependencies (freshly created and installed or reused from a previous run).

Also, the following environment variable will be set:

  • PYEMPAQ_PYZ_PATH: the absolute path to the .pyz run by the user

How to install PyEmpaq

Directly from PyPI:

pip install --user --upgrade --ignore-installed pyempaq

It's handy to install it using pipx, if you have it:

pipx install pyempaq

If you have fades you don't even need to install pyempaq, just run it:

fades -d pyempaq -x pyempaq

In the future there will be more ways to install it. Please open an issue if you desire an installation method (extra points if you specify how), thanks!

Try packing an example project

PyEmpaq sources come with a small example project if you want to play a little packing it. Just a couple of dir/files under examples/srcproject:

  • a src and media, with stuff to be imported and accessed.

  • a pyempaq.yaml with the configuration for PyEmpaq.

  • a ep.py file which is the project's entrypoint; all it does is to inform it started, import the internal module, access the media files, and use the declared dependency, reporting every step.

  • a secrets.txt file that must not be included in the packed file.

This explores most of the needs of any project. You can try this example, and surely after you will be ready to actually pack any other project you want.

So, let's pack the example source project. As you're working with the PyEmpaq project itself (as you're packing its example), you don't really need to have it installed yet. In that case, if you have fades installed is super easy:

fades -r requirements.txt -m pyempaq examples/srcproject/

Otherwise, you would need to create and use a virtual environment:

python3 -m venv env
source env/bin/activate
pip install -r requirements
python3 -m pyempaq examples/srcproject/

After running that command, you will see a pyempaq-example.pyz file. That is the whole project encoded in a single file.

At this point you may move that pyempaq-example.pyz to another directory, or to another machine, even that other machine having another operating system.

Then, try it:

python3 pyempaq-example.pyz

You should see the project's reportings that we mentioned above (note: these lines will be surrounded by debug ones that will be hidden by default in the future):

Hello world
Code access ok .../pyempaq/projectname-20210722013526/orig/src/foo.py
Media access ok
Module requests imported .../pyempaq/projectname-20210722013526/venv/lib/python3.8/site-packages/requests/__init__.py

This shows that what you've run actually started, accessed the internal modules and other files, and imported correctly a custom-installed dependency.

How to contribute to the project?

Please check the how to contribute instructions.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

pyempaq-0.4.0.tar.gz (32.6 kB view hashes)

Uploaded Source

Built Distribution

pyempaq-0.4.0-py3-none-any.whl (30.4 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page