pyg2p 3.0.0

Convert GRIB files to netCDF or PCRaster

ChangeLog

pyg2p

pyg2p is a converter between GRIB and netCDF4/PCRaster files. It can also manipulates GRIB messages (performing aggregation or simple unit conversion) before to apply format conversion.

Installation

To install package, you can use a python virtual environment or directly install dependencies and package at system level (executable script will be saved into /usr/local/bin in this case).

IMPORTANT: Before to launch setup, you need to configure geopotentials and intertables paths in configuration/global/global_conf.json. These paths are used by pyg2p to read geopotentials and intertables already configured. You may need to download files from FTP (launch pyg2p -W for this). Users running pyg2p installed by a different user (ie. root) will configure similar paths for their own intertables and geopotentials under his home folder. These paths will need write permissions.

Grab last archive and extract it in a folder (or clone this repository) and follow these steps:

$ cd pyg2p
$ vim configuration/global/global_conf.json # to edit shared paths !!!
$ python setup.py install

After installation, you will have all dependencies installed and an executable script 'pyg2p' (in a virtual environment, script is located under <VIRTUALENV_PATH>/bin folder otherwise under /usr/local/bin). Some python packages can be problematic to install at first shot. Read following paragraph for details.

Configuration

One of the things to configure for any user running pyg2p, is GEOPOTENTIALS and INTERTABLES variables with paths to folders with write permissions.

NOTE: From version 2.1, the user needs to setup these variables only if she/he needs to write new interpolation tables (option -B [-X]) or to add new geopotentials from grib files (option -g).

These variables contains user paths and must be configured in a .conf file (e.g. paths.conf) under ~/.pyg2p/ directory. This can look like:

GEOPOTENTIALS=/dataset/pyg2p_data_user/geopotentials
INTERTABLES=/dataset/pyg2p_data_user/intertables

User intertables (for interpolation) are read/write from INTERTABLES and geopotentials (for correction) are read from GEOPOTENTIALS. Pyg2p will use its default configuration for available intertables and geopotentials. These are read from paths configured during installation in global_conf.json. If you need to download default files from ECMWF FTP, just launch pyg2p with -W option and the dataset argument (argument can be geopotentials or intertables) and files are saved in user paths configured above:

$ pyg2p -W intertables

You can edit FTP authentication parameters in ~/.pyg2p/ftp.json

Advanced configuration

User json configuration files are empty. If you need a new parameter or geopotential that is not configured internally in pyg2p, you can setup new items (or overwrite internal configuration).

Adding a parameter to ~/.pyg2p/parameters.json

If you are extracting a parameter with shortName xy from a grib file that is not already globally configured, add an element as shown below (only part in bold has been added):

{
  "xy": {
    "@description": "Variable description",
    "@shortName": "xy",
    "@unit": "unitstring"
  }
}

You can configure (more than) a conversion element with different ids and functions. You will use shortName and conversionId in the execution JSON templates.

{
    "xy": { "@description": "Variable description",
    "@shortName": "xy",
    "@unit": "unitstring"
    },
    "xyz": {
    "@description": "Variable description",
    "@shortName": "xyz",
    "@unit": "unitstring/unistring2",
    "Conversion": [
        {
        "@cutOffNegative": true,
        "@function": "x=x*(-0.13)**2",
        "@id": "conv_xyz1",
        "@unit": "g/d"
        },
        {
        "@cutOffNegative": true,
        "@function": "x=x/5466 - (x**2)",
        "@id": "conv_xyz2",
        "@unit": "g/h"
        }
      ]
    }
}

Note: Aware the syntax of conversion functions. They must start with x= followed by the actual conversion formula where x is the value to convert. Units are only used for logging.

Adding a geopotential for correction

If the input grib file has a geopotential message, pyg2p will use it for correction. Otherwise, it will read the file from user data paths or global data paths. To add a geopotential GRIB file to pyg2p configuration, use this command:

$ pyg2p -g path_to_geopotential_grib

This will copy the file to folder defined in GEOPOTENTIALS variable and will update geopotentials.json with the new item.

Interpolation tables

Interpolation tables are read from user or global data folders. If the table is missing, it will create it into user data folder for future interpolations (you must pass -B option to pyg2p). Depending on source and target grids size, and on interpolation method, table creation can take from minutes to days. To speed up interpolation table creation, use parallel option -X to have up to x6 speed gain.

Execution templates

Execution templates are JSON files that you will use to configure a conversion. You will pass path to the file to pyg2p with command line option -c. Most of options can be both defined in this JSON file and from command line. Note that command line options overwrite JSON template.

If you have a large set of conversions for same parameters, it's more convenient to define a single template where you define parameter, interpolation and aggregation and pass the rest of parameters from command line. Here some examples of JSON commands files:

{
    "Execution": {
        "@name": "Octahedral test 1",
        "Aggregation": {
            "@step": 24,
            "@type": "average"
        },
        "OutMaps": {
            "@cloneMap": "/dataset/maps/europe5km/dem.map",
            "@ext": 1,
            "@fmap": 1,
            "@namePrefix": "t2",
            "@unitTime": 24,
            "Interpolation": {
                "@latMap": "/dataset/maps/europe5km/lat.map",
                "@lonMap": "/dataset/maps/europe5km/long.map",
                "@mode": "grib_nearest"
            }
        },
        "Parameter": {
            "@applyConversion": "k2c",
            "@correctionFormula": "p+gem-dem*0.0065",
            "@demMap": "/dataset/maps/europe5km/dem.map",
            "@gem": "(z/9.81)*0.0065",
            "@shortName": "2t"
        }
    }
}

There are four sections of configuration.

Aggregation

Defines the aggregation method and step. Method can be accumulation, average or instantaneous.

OutMaps

Here you define interpolation method and paths to coordinates PCRaster maps, output unit time, the clone map etc.

Interpolation

This is a subelement of OutMaps. Here you define interpolation method (see later for details), paths to coordinates maps.

Parameter

In this section, you configure the parameter to select by using its shortName, as stored in GRIB file. You also configure conversion with applyConversion property set to a conversion id. Parameter shortName must be already configured in ~/.pyg2p/parameters.json along with conversion ids. If you need to apply correction based on DEM files and geopotentials, you can configure formulas and the path to DEM map.

Path configuration

You can use variables in JSON files to define paths. Variables can be configured in .conf files under ~/.pyg2p/ folder. /home/domenico/.pyg2p/myconf.conf

EUROPE_MAPS=/dataset/maps/europe5km
DEM_MAP=/dataset/maps/dem05.map
EUROPE_DEM=/dataset/maps/europe/dem.map
EUROPE_LAT=/dataset/maps/europe/lat.map
EUROPE_LON=/dataset/maps/europe/long.map

Usage of user defined paths in JSON command file:

{ 
"Execution": {
  "@name": "eue_t24",
  "Aggregation": {
    "@step": 24,
    "@type": "average"
  },
  "OutMaps": {
        "@format": "netcdf",
        "@cloneMap": "{EUROPE_MAPS}/lat.map",
        "@ext": 1,
        "@fmap": 1,
        "@namePrefix": "pT24",
        "@unitTime": 24,
        "Interpolation": {
          "@latMap": "{EUROPE_MAPS}/lat.map",
          "@lonMap": "{EUROPE_MAPS}/long.map",
          "@mode": "grib_nearest"
        }
  },
  "Parameter": {
    "@applyConversion": "k2c",
    "@correctionFormula": "p+gem-dem*0.0065",
    "@demMap": "{DEM_MAP}",
    "@gem": "(z/9.81)*0.0065",
    "@shortName": "2t"
  }
 }
}

Full list of options

Section	Attribute	Description
Execution	name	Descriptive name of the execution configuration.
	Parameter	See relative table
	OutMaps	See relative table
	Parameter	See relative table
Parameter	shortName	The short name of the parameter, as it is in the grib file. The application use this to select messages. Must be configured in the parameters.json file, otherwise the application exits with an error.
	tstart	Optional grib selectors perturbationNumber, tstart, tend, dataDate and dataTime can also be issued via command line arguments (-m, -s, -e, -D, -T), which overwrite the ones in the execution JSON file.
	tend
	perturbationNumber
	dataDate
	dataTime
	level
	applyConversion	The conversion id to apply, as in the parameters.json file for the parameter to select. The combination parameter/conversion must be properly configured in parmaters.json file, otherwise the application exits with an error.
	correctionFormula	Formula to use for parameter correction with p, gem, dem variables, representing parameter value, converted geopotential to gem, and DEM map value. E.g.: p+gem*0.0065-dem*0.0065
	demMap	The dem map used for correction.
	gem	Formula for geopotential conversion for correction.
OutMaps	cloneMap	The clone map with area (must have a REAL cell type and missing values for points outside area of interest. A dem map works fine. A typical area boolean map will not).
	unitTime	Time unit in hours of output maps. Tipical value is 24 (daily maps).
	format	Output file format. Default 'pcraster'. Available formats are 'pcraster', 'netcdf'.
	namePrefix	Prefix for maps. Default is parameter shortName.
	fmap	First PCRaster map number. Default 1.
	Interpolation	See relative table.
	ext	Extension mode. It's the integer number defining the step numbers to skip when writing maps. Same as old grib2pcraster. Default 1.
Aggregation	step	Step of aggregation in hours.
	type	Type of aggregation (it was Manipulation in grib2pcraster). It can be average or accumulation.
	forceZeroArray	Optional. In case of “accumulation”, and only then, if this attribute is set to”y” (or any value different from “false”, “False”, “FALSE”, “no”, “NO”, “No”, “0”), the program will use a zero array as message at step 0 to compute the first map, even if the GRIB file has a step 0 message.
Interpolation	mode	Interpolation mode. Possible values are: “nearest”, “invdist”, “grib_nearest”, “grib_invdist”
	latMap	PCRaster map of target latitudes.
	lonMap	PCRaster map of target longitudes.
	intertableDir	Alternative home folder for interpolation lookup tables, where pyg2p will load/save intertables. Folder must be existing. If not set, pyg2p will use intertables from ~/.pyg2p/intertables/

Usage

To use the application, after the main configuration you need to configure a template JSON file for each type of extraction you need to perform.

Grabbing information from GRIB files.

To configure the application and compile your JSON templates, you might need to know the variable shortName as stored in the input GRIB file you're using or in the geopotential GRIB. Just execute the following GRIB tool command:

grib_get -p shortName /path/to/grib

Other keys you would to know for configuration or debugging purposes are:

• startStep
• endStep (for instantaneous messages, it can be the same of startStep)
• perturbationNumber (the EPS member number)
• stepType (type of field: instantaneous: 'instant', average: 'avg', cumulated: 'cumul')
• longitudeOfFirstGridPointInDegrees
• longitudeOfLastGridPointInDegrees
• latitudeOfFirstGridPointInDegrees
• latiitudeOfLastGridPointInDegrees
• Ni (it can be missing)
• Nj (it states the resolution: it's the number of points along the meridian)
• numberOfValues
• gridType (e.g.: regular_ll, reduced_gg, rotated_ll)

Input arguments

If you run pyg2p without arguments, it shows help of all input arguments.

usage: pyg2p [-h] [-c json_file] [-o out_dir] [-i input_file]
[-I input_file_2nd] [-s tstart] [-e tend] [-m eps_member]
[-T data_time] [-D data_date] [-f fmap] [-F format] [-x extension_step]
[-n outfiles_prefix] [-l log_level] [-N intertable_dir] [-B] [-X]
[-t cmds_file] [-g geopotential] [-C path] [-z path] [-W dataset]

Execute the grib to pcraster conversion using parameters from the input json configuration.
Read user manual.

optional arguments:
-h, --help show this help message and exit
-c json_file, --commandsFile json_file
Path to json command file
-o out_dir, --outDir out_dir
Path where output maps will be created.
-i input_file, --inputFile input_file
Path to input grib.
-I input_file_2nd, --inputFile2 input_file_2nd
Path to 2nd resolution input grib.
-s tstart, --start tstart
Grib timestep start. It overwrites the tstart in json
execution file.
-e tend, --end tend Grib timestep end. It overwrites the tend in json
execution file.
-m eps_member, --perturbationNumber eps_member
eps member number
-T data_time, --dataTime data_time
To select messages by dataTime key value
-D data_date, --dataDate data_date
<YYYYMMDD> to select messages by dataDate key value
-f fmap, --fmap fmap First map number
-F format, --format format
Output format. Available options: netcdf, pcraster.
Default pcraster
-x extension_step, --ext extension_step
Extension number step
-n outfiles_prefix, --namePrefix outfiles_prefix
Prefix name for maps
-l log_level, --loggerLevel log_level
Console logging level
-N intertable_dir, --intertableDir intertable_dir
interpolation tables dir
-B, --createIntertable
create intertable file
-X, --interpolationParallel
Use parallelization tools to make interpolation
faster.If -B option is not passed or intertable
already exists it does not have any effect.
-t cmds_file, --test cmds_file
Path to a text file containing list of commands,
defining a battery of tests. Then it will create diff
pcraster maps and log alerts if differences are higher
than a threshold (edit configuration in test.json)
-g geopotential, --addGeopotential geopotential
Add the file to geopotentials.json configuration file, to use for correction. The file will be copied into
the right folder (configuration/geopotentials) Note:
shortName of geopotential must be "fis" or "z"
-C path, --convertConf path
Convert old xml configuration to new json format
-z path, --convertIntertables path
Convert old pyg2p intertables to new version and copy
to user folders
-W dataset, --downloadConf dataset
Download intertables and geopotentials (FTP settings
defined in ftp.json)

Usage examples:

pyg2p -c ./exec1.json -i ./input.grib -o /out/dir -s 12 -e 36 -F netcdf
pyg2p -c ./exec2.json -i ./input.grib -o /out/dir -m 10 -l INFO --format netcdf
pyg2p -c ./exec3.json -i ./input.grib -I /input2ndres.grib -o /out/dir -m 10 -l DEBUG
pyg2p -g /path/to/geopotential/grib/file # add geopotential to configuration
pyg2p -t /path/to/test/commands.txt
pyg2p -h

Note: Even if 'netcdf' format is used for output, paths to PCRaster clone/area,
latitudes and longitudes maps have to be setup in any case.

Check output maps

After the execution, you can check output maps by using the PCRaster2 Aguila viewer for PCRaster maps or the NASA Panoply3 viewer for NetCDF files.

aguila /dataset/testdiffmaps/eueT24/pT240000.001

./panoply.sh /dataset/octahedral/out/grib_vs_scipy/global/ta/p_2016-09-25_average.nc

Maps will be written in the folder specified by -o input argument. If this is missing, you will find maps in the folder where you launched the application (./). Refer to official documentation for further information about Aguila and Panoply.

Interpolation modes

Interpolation is configured in JSON execution templates using the Interpolation attribute inside OutMaps. There are four interpolation methods available. Two are using GRIB_API nearest neighbours routines while the other two leverage on Scipy kd_tree module.

Note: GRIB_API does not implement nearest neighbours routing for rotated grids.
You have to use scipy methods and regular target grids (i.e.: latitudes and
longitudes PCRaster maps).

Intertable creation

Interpolation will use precompiled intertables. They will be found in the path configured in INTERTABLES folder (take into account that can potentially contains gigabytes of files) or in global data path. You can also define an alternate intertables directory with -N argument (or @intertableDir attribute in JSON template).

If interlookup table doesn't exist, the application will create one into INTERTABLES folder and update intertables.json configuration only if -B option is passed, otherwise program will exit. Be aware that for certain combination of grid and maps, the creation of the interlookup table (which is a numpy array saved in a binary file) could take several hours or even days for GRIB interpolation methods.

To have better performances (up to x6 of gain) you can pass -X option to enable parallel processing.

Performances are not comparable with scipy based interpolation (seconds or minutes) but this option could not be viable for all GRIB inputs.

GRIB/ecCodes API interpolation methods

To configure the interpolation method for conversion, set the @mode attribute in Execution/OutMaps/Interpolation property.

grib_nearest

This method uses GRIB API to perform nearest neighbour query. To configure this method, define:

"Interpolation": {
  "@latMap": "/dataset/maps/europe5km/lat.map",
  "@lonMap": "/dataset/maps/europe5km/long.map",
  "@mode": "grib_nearest"
}

grib_invdist

It uses GRIB_API to query for four neighbours and relative distances. It applies inverse distance calculation to compute the final value. To configure this method:

"Interpolation": {
  "@latMap": "/dataset/maps/europe5km/lat.map",
  "@lonMap": "/dataset/maps/europe5km/long.map",
  "@mode": "grib_invdist"
}

SciPy interpolation methods

nearest

It's the same nearest neighbour algorithm of grib_nearest but it uses the scipy kd_tree4 module to obtain neighbours and distances.

"Interpolation": {
  "@latMap": "/dataset/maps/europe5km/lat.map",
  "@lonMap": "/dataset/maps/europe5km/long.map",
  "@mode": "nearest"
}

invdist

It's the inverse distance algorithm with scipy.kd_tree , using 8 neighbours.

"Interpolation": {
  "@latMap": "/dataset/maps/europe5km/lat.map",
  "@lonMap": "/dataset/maps/europe5km/long.map",
  "@mode": "invdist"
}

Attributes p, leafsize and eps for the kd tree algorithm are default in scipy library:

Attribute	Details
p	2 (Euclidean metric)
eps	0
leafsize	10

OutMaps configuration

Interpolation is configured under the OutMaps tag. With additional attributes, you also configure resulting PCRaster maps. Output dir is ./ by default or you can set it via command line using the option -o (--outDir).

Attribute	Details
namePrefix	Prefix name for output map files. Default is the value of shortName key.
unitTime	Unit time in hours for results. This is used during aggregation operations.
fmap	Extension number for the first map. Default 1.
ext	Extension mode. It's the integer number defining the step numbers to skip when writing maps. Same as old grib2pcraster. Default 1.
cloneMap	Path to a PCRaster clone map, needed by PCRaster libraries to write a new map on disk.

Aggregation

Values from grib files can be aggregated before to write the final PCRaster maps. There are two kinds of aggregation available: average and accumulation. The JSON configuration in the execution file will look like:

"Aggregation": {
  "@type": "average"
}

To better understand what these two types of aggregations do, the DEBUG output of execution is presented later in same paragraph.

Average

Temperatures are often extracted as averages on 24 hours or 6 hours. Here's a typical execution configuration and the output of interest:

cosmo_t24.json

"Execution": {
"@name": "cosmo_T24",
"Aggregation": {
"@step": 24,
"@type": "average"
},
"OutMaps": {
"@cloneMap": "/dataset/maps/europe/dem.map",
"@ext": 4,
"@fmap": 1,
"@namePrefix": "T24",
"@unitTime": 24,
"Interpolation": {
"@latMap": "/dataset/maps/europe/lat.map",
"@lonMap": "/dataset/maps/europe/lon.map",
"@mode": "nearest"
}
},
"Parameter": {
"@applyConversion": "k2c",
"@correctionFormula": "p+gem-dem*0.0065",
"@demMap": "/dataset/maps/europe/dem.map",
"@gem": "(z/9.81)*0.0065",
"@shortName": "2t"
}
}
}
}

Command pyg2p -l DEBUG -c /execution_templates/cosmo_t24.json -i /dataset/cosmo/2012111912_pf10_t2.grb -o ./cosmo -m 10

ext parameter ext value will affect numbering of output maps:

[2013-07-12 00:06:18,545] :./cosmo/T24a0000.001 written!
[2013-07-12 00:06:18,811] :./cosmo/T24a0000.005 written!
[2013-07-12 00:06:19,079] :./cosmo/T24a0000.009 written!
[2013-07-12 00:06:19,349] :./cosmo/T24a0000.013 written!
[2013-07-12 00:06:19,620] :./cosmo/T24a0000.017 written!

This is needed because we performed 24 hours average over 6 hourly steps.

Accumulation

For precipitation values, accumulation over 6 or 24 hours is often performed. Here's an example of configuration and execution output in DEBUG mode.

dwd_r06.json

{"Execution": {
"@name": "dwd_rain_gsp",
"Aggregation": {
"@step": 6,
"@type": "accumulation"
},
"OutMaps": {
"@cloneMap": "/dataset/maps/europe/dem.map",
"@fmap": 1,
"@namePrefix": "pR06",
"@unitTime": 24,
"Interpolation": {
"@latMap": "/dataset/maps/europe/lat.map",
"@lonMap": "/dataset/maps/europe/lon.map",
"@mode": "nearest"
}
},
"Parameter": {
"@shortName": "RAIN_GSP",
"@tend": 18,
"@tstart": 12
}
}
}

Command pyg2p -l DEBUG -c /execution_templates/dwd_r06.json -i /dataset/dwd/2012111912_pf10_tp.grb -o ./cosmo -m 10

Output

[2013-07-11 23:33:19,646] : Opening the GRIBReader for
/dataset/dwd/grib/dwd_grib1_ispra_LME_2012111900
[2013-07-11 23:33:19,859] : Grib input step 1 [type of step: accum]
[2013-07-11 23:33:19,859] : Gribs from 0 to 78
...
...
[2013-07-11 23:33:20,299] : ******** **** MANIPULATION **** *************
[2013-07-11 23:33:20,299] : Accumulation at resolution: 657
[2013-07-11 23:33:20,300] : out[s:6 e:12 res:657 step-lenght:6] = grib:12 - grib:6 *
(24/6))
[2013-07-11 23:33:20,316] : out[s:12 e:18 res:657 step-lenght:6] = grib:18 - grib:12 *
(24/6))

Note: If you want to perform accumulation from Ts to Te with an aggregation step
Ta, and Ts-Ta=0 (e.g. Ts=6h, Te=48h, Ta=6h), the program will select the first
message at step 0 if present in the GRIB file, while you would use a zero values
message instead.
To use a zero values array, set the attribute forceZeroArray to ”true” in the
Aggregation configuration element.
For some DWD5 and COSMO6 accumulated precipitation files, the first zero message is
an instant precipitation and the decision at EFAS was to use a zero message, as it
happens for UKMO extractions, where input GRIB files don't have a first zero step
message.

grib_get -p units,name,stepRange,shortName,stepType 2012111912_pf10_tp.grb

kg m**-2 Total Precipitation 0 tp instant
kg m**-2 Total Precipitation 0-6 tp accum
kg m**-2 Total Precipitation 0-12 tp accum
kg m**-2 Total Precipitation 0-18 tp accum
...
...
kg m**-2 Total Precipitation 0-48 tp accum

Correction

Values from grib files can be corrected with respect to their altitude coordinate (Lapse rate formulas). Formulas will use also a geopotential value (to read from a GRIB file, see later in this chapter for configuration). Correction has to be configured in the Parameter element, with three mandatory attributes.

• correctionFormula (the formula used for correction, with input variables parameter value (p), gem, and dem value.
• gem (the formula to obtain gem value from geopotential z value)
• demMap (path to the DEM PCRaster map)

Note: formulas must be written in python notation.

Tested configurations are only for temperature and are specified as follows:

Temperature correction

"Parameter": {
  "@applyConversion": "k2c",
  "@correctionFormula": "p+gem-dem*0.0065",
  "@demMap": "/dataset/maps/europe/dem.map",
  "@gem": "(z/9.81)*0.0065",
  "@shortName": "2t"
}

A more complicated correction formula:

"Parameter": {
  "@applyConversion": "k2c",
  "@correctionFormula": "p/gem*(10**((-0.159)*dem/1000))",
  "@demMap": "/dataset/maps/europe/dem.map",
  "@gem": "(10**((-0.159)*(z/9.81)/1000))",
  "@shortName": "2t"
}

How to write formulas

z is the geopotential value as read from the grib file gem is the value resulting from the formula specified in gem attribute I.e.: (gem="(10**((-0.159)*(z/9.81)/1000)))" dem is the dem value as read from the PCRaster map

Be aware that if your dem map has directions values, those will be replicated in the final map.

Which geopotential file is used?

The application will try to find a geopotential message in input GRIB file. If a geopotential message is not found, pyg2p will select a geopotential file from user or global data paths, by selecting filename from configuration according the geodetic attributes of GRIB message. If it doesn't find any suitable grib file, application will exit with an error message.

Geodetic attributes compose the key id in the JSON configuration (note the $ delimiter):

longitudeOfFirstGridPointInDegrees$longitudeOfLastGridPointInDegrees$Ni$Nj$numberOfValues$gridType

If you want to add another geopotential file to the configuration, just execute the command:

pyg2p -g /path/to/geopotential/grib/file

The application will copy the geopotential GRIB file into GEOPOTENTIALS folder (under user home directory) and will also add the proper JSON configuration to geopotentials.json file.

Conversion

Values from GRIB files can be converted before to write final output maps. Conversions are configured in the parameters.json file for each parameter (ie. shortName).

The right conversion formula will be selected using the id specified in the applyConversion attribute, and the shortName attribute of the parameter that is going to be extracted and converted.

Refer to Parameter configuration paragraph for details.

Logging

Console logger level is INFO by default and can be optionally set by using -l (or –loggerLevel) input argument.

Possible logger level values are ERROR, WARN, INFO, DEBUG, in increasing order of verbosity .

pyg2p API

From version 1.3, pyg2p comes with a simple API to import and use from other python programs (e.g. pyEfas). The pyg2p API is intended to mimic the pyg2p.py script execution from command line so it provides a Command class with methods to set input parameters and a run_command(cmd) module level function to execute pyg2p.

Setting execution parameters

1. Create a pyg2p command:

from pyg2p.main import api
command = api.command()

2. Setup execution parameters using a chain of methods (or single calls):

command.with_cmdpath('a.json')
command.with_inputfile('0.grb')
command.with_log_level('ERROR').with_out_format('netcdf')
command.with_outdir('/dataout/').with_tstart('6').with_tend('24').with_eps('10').with_fmap('1')
command.with_ext('4')
print(str(command))
'pyg2p.py -c a.json -e 240 -f 1 -i 0.grb -l ERROR -m 10 -o /dataout/test -s 6 -x 4 -F netcdf'

You can also create a command object using the input arguments as you would do when execute pyg2p from command line:

args_string = '-l ERROR -c /pyg2p_git/execution_templates_devel/eue_t24.json -i /dataset/test_2013330702/EpsN320-2013063000.grb -o /dataset/testdiffmaps/eueT24 -m 10'
command2 = api.command(args_string)

Execute

Use the run_command function from pyg2p module. This will delegate the main method, without shell execution.

ret = api.run_command(command)

The function returns the same value pyg2p returns if executed from shell (0 for correct executions, included those for which messages are not found).

Adding geopotential file to configuration

You can add a geopotential file to configuration from pyg2p API as well, using Configuration classes:

from pyg2p.main.config import UserConfiguration, GeopotentialsConfiguration
user=UserConfiguration()
geopotentials=GeopotentialsConfiguration(user)
geopotentials.add('path/to/geopotential.grib')

The result will be the same as executing pyg2p -g path/to/geopotential.grib.

Appendix A - Execution JSON files examples

This paragraph will explain typical execution json configurations.

Example 1: Correction with dem and geopotentials

pyg2p -c example1.json -i /dataset/cosmo/2012111912_pf2_t2.grb -o ./out_1

example1.json

{
  "Execution": {
    "@name": "eue_t24",
    "Aggregation": {
      "@step": 24,
      "@type": "average"
    },
    "OutMaps": {
      "@cloneMap": "{EUROPE_MAPS}/lat.map",
      "@ext": 1,
      "@fmap": 1,
      "@namePrefix": "pT24",
      "@unitTime": 24,
      "Interpolation": {
        "@latMap": "{EUROPE_MAPS}/lat.map",
        "@lonMap": "{EUROPE_MAPS}/long.map",
        "@mode": "grib_nearest"
      }
    },
    "Parameter": {
        "@applyConversion": "k2c",
        "@correctionFormula": "p+gem-dem*0.0065",
        "@demMap": "{DEM_MAP}",
        "@gem": "(z/9.81)*0.0065",
        "@shortName": "2t"
    }
  }
}

This configuration, will select the 2t parameter from time step 0 to 12, out of a cosmo t2 file. Values will be corrected using the dem map and a geopotential file as in geopotentials.json configuration.

Maps will be written under ./out_1 folder (the folder will be created if not existing yet). The clone map is set as same as dem.map.

Note that paths to maps uses variables EUROPE_MAPS and DEM_MAP. You will set these variables in myconf.conf file under ~/.pyg2p/ folder.

The original values will be converted using the conversion “k2c”. This conversion must be configured in the parameters.json file for the variable which is being extracted (2t). See Parameter property configuration at Parameter. The interpolation method is grib_nearest. Latitudes and longitudes values will be used only if the interpolation lookup table (intertable) hasn't be created yet but it's mandatory to set latMap and lonMap because the application uses their metadata raster attributes to select the right intertable. The table filename to be read and used for interpolation is automatically found by the application, so there is no need to specify it in configuration. However, lat and lon maps are mandatory configuration attributes.

Example 2: Dealing with multiresolution files

pyg2p -c example1.json -i 20130325_en0to10.grib -I 20130325_en11to15.grib -o ./out_2

Performs accumulation 24 hours out of sro values of two input grib files having different vertical resolutions. You can also feed pyg2p with a single multiresolution file.

pyg2p -c example1.json -i 20130325_sro_0to15.grib o ./out_2 -m 0

{
  "Execution": {
    "@name": "multi_sro",
    "Aggregation": {
      "@step": 24,
      "@type": "accumulation"
    },
    "OutMaps": {
      "@cloneMap": "/dataset/maps/global/dem.map",
      "@fmap": 1,
      "@namePrefix": "psro",
      "@unitTime": 24,
      "Interpolation": {
        "@latMap": "/dataset/maps/global/lat.map",
        "@lonMap": "/dataset/maps/global/lon.map",
        "@mode": "grib_nearest"
      }
    },
    "Parameter": {
      "@applyConversion": "m2mm",
      "@shortName": "sro",
      "@tend": 360,
      "@tstart": 0
    }
  }
}

This execution configuration will extract global overlapping messages sro (perturbation number 0) from two files at different resolution. Values will be converted using “tomm” conversion and maps (interpolation used here is grib_nearest) will be written under ./out_6 folder.

Example 3: Accumulation 24 hours

./pyg2p.py -i /dataset/eue/EpsN320-2012112000.grb -o ./out_eue -c execution_file_examples/execution_9.json

{
  "Execution": {
    "@name": "eue_tp",
    "Aggregation": {
      "@step": 24,
      "@type": "accumulation"
    },
    "OutMaps": {
      "@cloneMap": "/dataset/maps/europe5km/lat.map",
      "@fmap": 1,
      "@namePrefix": "pR24",
      "@unitTime": 24,
      "Interpolation": {
        "@latMap": "/dataset/maps/europe5km/lat.map",
        "@lonMap": "/dataset/maps/europe5km/long.map",
        "@mode": "grib_nearest"
      }
    },
    "Parameter": {
      "@applyConversion": "tomm",
      "@shortName": "tp"
    }
  }
}

Appendix B – Netcdf format output

Format: NETCDF4_CLASSIC.
Convention: CF-1.6
Dimensions:
        xc: Number of rows of area/clone map
        yc: Number of cols of area/clone map
        time: Unlimited dimension for time steps
Variables:
        lon: 2D array with shape (yc, xc)
        lat: 2D array with shape (yc, xc)
        time_nc: 1D array of values representing hours since dataDate of first grib message (endStep)
        values_nc: a 3D array of dimensions (time, yc, xc), with coordinates set to 'lon, lat'.