Framework for functional hardware design approach
Project description
HW Design: A Functional Approach
PyGears is a free framework that lets you design hardware using high-level Python constructs and compile it to synthesizable SystemVerilog or Verilog code. There is a built-in simulator that lets you use arbitrary Python code with its vast set of libraries to verify your hardware modules. PyGears makes connecting modules easy, and has built-in synchronization mechanisms that help you build correct parallel systems.
@gear
def echo(samples: Fixp, *, feedback_gain, sample_rate, delay):
sample_dly_len = round(sample_rate * delay)
fifo_depth = ceil_pow2(sample_dly_len)
feedback_gain_fixp = samples.dtype(feedback_gain)
dout = Intf(samples.dtype)
feedback = decouple(dout, depth=fifo_depth) \
| prefill(dtype=samples.dtype, num=sample_dly_len)
feedback_attenuated = (feedback * feedback_gain_fixp) \
| samples.dtype
dout |= (samples + feedback_attenuated) | samples.dtype
return dout
Python functions model hardware modules, where function arguments represent module inputs and parameters. Example echo module has a single input port called samples where data of arbitrary signed fixed-point type Fixp can be received. Other three parameters feedback_gain, sample_rate and delay are compile time parameters.
@gear
def echo(samples: Fixp, *, feedback_gain, sample_rate, delay):
...
Arbitrary Python code can be used in modules at compile time, for an example to transform input parameters:
sample_dly_len = round(sample_rate * delay)
fifo_depth = ceil_pow2(sample_dly_len)
feedback_gain_fixp = samples.dtype(feedback_gain)
Rest of the echo function code describes the hardware module for applying echo audio effect to the input stream.
Modules are instantiated using function calls: decouple(dout, depth=fifo_depth), which return module output interfaces that can in turn be passed as arguments to other module functions in order to make a connection between the modules. For conveniance the pipe "|" operator can be used to pass output of one function as argument to the next one. This was used to connect the output of decouple to prefill ("\" is used just to split the line visually):
feedback = decouple(dout, depth=fifo_depth) \
| prefill(dtype=samples.dtype, num=sample_dly_len)
Again, the echo function returns its output interfaces which is then used to establish the connection with the next module that received the echo output stream:
@gear
def echo(...):
...
return dout
Built-in simulator makes it easy to test and verify the modules while drawing power from the Python vast ecosystem of libraries. For an example, use Python built-in audioop library to read WAV files into an input samples stream for the echo module, and then visualise the input and output waveforms using matplotlib:
Speedup the simulation by configuring PyGears simulator to use open-source Verilator to simulate hardware modules, or some of the proprietary simulators like Questa, NCSim or Xsim. Implement any part of the system in a standard HDL and debug your design by inspecting the waveforms for an example in open-source wave viewer GTKWave
Checkout Echo example description for more in depth information about the echo example.
Installation instructions
Install PyGears package with the Python package manager. On Linux distributions, depending on how your Python was installed you might get an error and need to prefix the command with sudo:
pip3 install pygears
For more detailed installation instructions (including how to install additional software) checkout Installation page.
Read the documentation
Checkout the examples
Echo: Hardware module that applies echo audio effect to a continuous audio stream.
RISC-V processor: PyGears implementation. Checkout also the RISC-V implementation blog series.
Tests: Contain many examples on how individual PyGears components operate
Contributions
Special thanks to the people that helped develop this framework:
Andrea Erdeljan
Damjan Rakanović
Nemanja Kajtez
Risto Pejašinović
Stefan Tambur
Vladimir Nikić
Vladimir Vrbaški
In order to contribute, pull your copy from github repository and create a pull request.
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.