pygeocodio 1.2.0

Python wrapper for Geocod.io API

Python wrapper for Geocodio geocoding API.

Full documentation on Read the Docs.

If you are upgrading from a version prior to 0.2.0 please see the changelog in HISTORY.rst. The default coordinate ordering has changed to something a bit more sensible for most users.

Geocodio API Features

• Geocode an individual address

• Batch geocode up to 10,000 addresses at a time

• Parse an address into its identifiable components

• Reverse geocode an individual geographic point

• Batch reverse geocode up to 10,000 points at a time

• Perform operations using the HIPAA API URL

The service is limited to U.S. and Canada addresses for the time being.

Read the complete Geocodio documentation for service documentation.

Installation

pygeocodio requires requests 1.0.0 or greater and will ensure requests is installed:

pip install pygeocodio

Basic usage

Import the API client and ensure you have a valid API key:

>>> from geocodio import GeocodioClient
>>> client = GeocodioClient(YOUR_API_KEY)

Note that you can pass in a timeout value in seconds (the default is no timeout):

>>> client = GeocodioClient(YOUR_API_KEY, timeout=15)

Geocoding

Geocoding an individual address:

>>> geocoded_location = client.geocode("42370 Bob Hope Drive, Rancho Mirage CA")
>>> geocoded_location.coords
(33.738987255507, -116.40833849559)

Geocode a set of address components:

>>> geocoded_location = client.geocode(components_data={
  "postal_code": "02210",
  "country": "US"
})
>>> geocoded_location.coords
(42.347547, -71.040645)

Batch geocoding

You can also geocode a list of addresses:

>>> geocoded_addresses = client.geocode([
        '2 15th St NW, Washington, DC 20024',
        '3101 Patterson Ave, Richmond, VA, 23221'
    ])

Return a list of just the coordinates for the resultant geocoded addresses:

>>> geocoded_addresses.coords
[(38.890083, -76.983822), (37.560446, -77.476008)]
>>> geocoded_addresses[0].coords
(38.890083, -76.983822)

Lookup an address by the queried address:

>>> geocoded_addresses.get('2 15th St NW, Washington, DC 20024').coords
(38.879138, -76.981879))

You can also geocode a list of address component dictionaries:

>>> geocoded_addresses = client.geocode(components_data=[{
        'street': '1109 N Highland St',
        'city': 'Arlington',
        'state': 'VA'
    }, {
        'city': 'Toronto',
        'country': 'CA'
    }])

And geocode a keyed mapping of address components:

>>> gecoded_addresses = client.geocode(components_data={
        "1": {
            "street": "1109 N Highland St",
            "city": "Arlington",
            "state": "VA"
        },
        "2": {
            "city": "Toronto",
            "country": "CA"
        }})

And geocode even a keyed mapping of addresses:

>>> geocoded_addresses = client.geocode({
        "1": "3101 patterson ave, richmond, va",
        "2": "1657 W Broad St, Richmond, VA"
    })

Return a list of just the coordinates for the resultant geocoded addresses:

>>> geocoded_addresses.coords
{'1': (37.560454, -77.47601), '2': (37.555176, -77.458273)}

Lookup an address by its key:

>>> geocoded_addresses.get("1").coords
(37.560454, -77.47601)

Address parsing

And if you just want to parse an individual address into its components:

>>> client.parse('1600 Pennsylvania Ave, Washington DC')
  {
      "address_components": {
          "number": "1600",
          "street": "Pennsylvania",
          "suffix": "Ave",
          "city": "Washington",
          "state": "DC"
      },
      "formatted_address": "1600 Pennsylvania Ave, Washington DC"
  }

Reverse geocoding

Reverse geocode a point to find a matching address:

>>> location = client.reverse((33.738987, -116.4083))
>>> location.formatted_address
"42370 Bob Hope Dr, Rancho Mirage CA, 92270"

Batch reverse geocoding

And multiple points at a time:

>>> locations = client.reverse([
        (33.738987, -116.4083),
        (33.738987, -116.4083),
        (38.890083, -76.983822)
    ])

Return the list of formatted addresses:

>>> locations.formatted_addresses
["42370 Bob Hope Dr, Rancho Mirage CA, 92270",  "42370 Bob Hope Dr, Rancho Mirage CA, 92270", "2 15th St NW, Washington, DC 20024"]

Access a specific address by the queried point tuple:

>>> locations.get("38.890083,-76.983822").formatted_address
"2 15th St NW, Washington, DC 20024"

Or by the more natural key of the queried point tuple:

>>> locations.get((38.890083, -76.983822)).formatted_address
"2 15th St NW, Washington, DC 20024"

CLI usage

In the works!

Documentation

For complete documentation see the docs.

License

BSD License

History

1.2.0 (2023-03-21)

• Adds custom_base_domain support (thanks MiniCodeMonkey!)

• Drops Python 3.6 support

• Adds official Python 3.11 support

1.1.0 (2022-03-28)

• Adds a timeout parameter for API requests (thanks aviv!)

1.0.1 (2021-07-18)

• Fixes batched keyed address geocoding

1.0.0 (2020-06-18)

• Adds support for keying batch geocode results (thanks liufran1 and Unix-Code!)

• Adds support for keying batch reverse geocode results (thanks liufran1 and Unix-Code!)

0.12.0 (2020-06-04)

• Adds auto-loading of API version (thanks Unix-Code!)

• Default API calls to Version 1.6 (thanks MiniCodeMonkey!)

0.11.1 (2019-11-07)

• Default API calls to Version 1.4 (thanks cyranix!)

0.11.0 (2019-10-19)

• Search by address components (thanks Unix-Code!)

0.10.0 (2019-02-05)

• Replaced http with https in clinet (thanks shea-parkes!)

0.9.0 (2019-01-15)

• Updates to use Geocodio API v 1.3 by default (thanks joshgeller!)

• The API version is now configurable for backwards and forward compatibility

0.8.0 (2018-12-30)

• Adds new US Census fields (thanks pedromachados!)

0.7.0 (2018-03-29)

• Added support for new Congressional districts for 2018 election (thanks nickcatal!)

0.6.0 (2018-02-16)

• Upgrade to Geocodio API version 1.2 (thanks MiniCodeMonkey!)

• Update allowed fields

• Update docs that Canada now included (thanks Goorzhel!)

• Miscellaneous fixes (thanks snake-plissken!)

0.5.0 (2016-05-16)

• Add additional allowed fields (census, cd114)

0.4.2 (2015-02-17)

• Bug fix the last bug fix

0.4.1 (2015-02-17)

• Bug fix to flatten ‘fields’ argument as a single query key

0.4.0 (2014-09-28)

• Bug fix for batch reverse geocoding

• Removes request handling from client methods

0.3.0 (2014-03-24)

• Adds support for additional data fields (e.g. Congressional districts, timezone)

0.2.1 (2014-02-15)

• Fixed Python 3.3 test errors. Shouldn’t have any functional effect on Python 3.3 usage except for matching module paths of pygeocodio objects.

0.2.0 (2014-02-07)

• Added initial reverse geocoding functionality

• Swaps default coordinates order. This is a mostly backwards incompatible change to amend a silly design decision.

0.1.4 (2014-01-25)

• Handle error in which Geoco.io has returned empty result set

0.1.3 (2014-01-25)

• Packaging fix, thanks to @kyen99

0.1.2 (2014-01-23)

• Moves and enhances fixture data to JSON data based on linted server responses

• Adds Geocodio named errors

• Better handling of errors in individual locations from batch requests

0.1.1 (2014-01-22)

• Adds requests to install_requires in setup.py and drops minimum version to 1.0.0

0.1.0 (2014-01-21)

• First release on PyPI.