Python API for serial communication of MyCobot.

Navigation

Verified details

These details have been verified by PyPI
Maintainers
Avatar for granet from gravatar.com granet Avatar for leonidfedorenchik from gravatar.com leonidfedorenchik Avatar for zacharyzhang from gravatar.com zacharyzhang

Unverified details

These details have not been verified by PyPI
Project links
GitHub Statistics

View statistics for this project via Libraries.io, or by using our public dataset on Google BigQuery

Meta

License: MIT License

Author: Elephantrobotics

Requires: Python >=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, != 3.4.*

Classifiers

Project description

This is Python API for myCobot

Python 2.7 Python 3 pypi_version

This is a python API for serial communication with mycobot and controlling it.

home

Installation

Notes:

Make sure that Atom is flashed into the top Atom, Transponder is flashed into the base Basic.
The firmware Atom and Transponder download address: https://github.com/elephantrobotics/myCobot/tree/main/Software
You also can use myStudio to flash them, myStudio address: https://github.com/elephantrobotics/myStudio/releases

Pip

pip install pymycobot --upgrade

Source code

git clone https://github.com/elephantrobotics/pymycobot.git <your-path>
cd <your-path>/pymycobot
# Install
[sudo] python2 setup.py install
# or
[sudo] python3 setup.py install

Or the more modern form:

# Install
pip install .
# Uninstall
pip uninstall .

## Usage:

```python
from pymycobot import MyCobot, Angle, Coord
from pymycobot import PI_PORT, PI_BAUD # For raspberry pi version of mycobot.

The demo directory stores some test case files.

You can find out which interfaces pymycobot provides in pymycobot/README.md.

Please go to here.

pymycobot

This is python API for mycobot.

We support Python2, Python3.5 or later.

Catalogue:

MyCobot

Import to your project:

# for mycobot
from pymycobot import MyCobot

# for mypalletizer
# from pymycobot import MyPalletizer

Note: If no parameter is given, there is no parameter; if no return value is given, there is no return value

Overall status

power_on

  • Prototype: power_on()

  • Description:Atom open communication (default open).

power_off

  • Prototype: power_off()

  • Description: Atom turn off communication.

is_power_on

  • Prototype: is_power_on()

  • Description: Adjust robot arm whether power on.

  • Returns

    • 1: power on
    • 0: power off
    • -1: error

release_all_servos

  • Prototype: release_all_servos()

  • Description: Set robot arm into free moving mode.

is_controller_connected

  • Prototype: is_controller_connected()

  • Description: Check if connected with Atom.

  • Returns

    • 1: connected
    • 0: not connected
    • -1: error

MDI mode and operation

get_angles

  • Prototype: get_angles()

  • Description: Get the degree of all joints.

  • Returns: list: A float list of all degree.

send_angle

  • Prototype: send_angles(id, degree, speed)

  • Description: Send one degree of joint to robot arm.

  • Parameters

    • id: Joint id(genre.Angle) / int 1-6
    • degree: degree value(float) (about -170 ～ 170)
    • speed: (int) 0 ~ 100

  • Example

    from pymycobot.mycobot import MyCobot
from pymycobot.genre import Angle


mycobot = MyCobot('/dev/ttyUSB0')
mycobot.send_angle(Angle.J2.value, 10, 50)

send_angles()

  • Prototype: send_angles(degrees, speed)

  • Description: Send the degrees of all joints to robot arm.

  • Parameters

    • degrees: a list of degree value(List[float]), length 6.

    • speed: (int) 0 ~ 100

  • Example

    from pymycobot.mycobot import MyCobot
from pymycobot.genre import Angle


mycobot = MyCobot('/dev/ttyUSB0')
mycobot.send_angles([0,0,0,0,0,0], 80)

get_radians

  • Prototype: get_radians()

  • Description: Get the radians of all joints.

  • Returns: list: A float list of radian.

send_radians

  • Prototype: send_radians(radians, speed)

  • Description: Send the radians of all joint to robot arm.

  • Parameters:

    • radians: a list of radian value(List[float]), length 6.
    • speed: (int) 0 ~ 100

  • Example

    from pymycobot.mycobot import MyCobot
from pymycobot.genre import Angle


mycobot = MyCobot('/dev/ttyUSB0')
mycobot.send_angles_by_radian([1,1,1,1,1,1], 70)

get_coords

  • Prototype: get_coords()

  • Description: Get the Coords from robot arm, coordinate system based on base.

  • Returns: list: A float list of coord - [x, y, z, rx, ry, rz]

send_coord

  • Prototype: send_coords(id, coord, speed)

  • Description: Send one coord to robot arm.

  • Parameters

    • id: coord id(genre.Coord) / int 1-6
    • coord: coord value(float)
    • speed: (int) 0 ~ 100

  • Example

    from pymycobot.mycobot import MyCobot
from pymycobot.genre import Coord


mycobot = MyCobot('/dev/ttyUSB0')
mycobot.send_coord(Coord.X.value, -40, 70)

send_coords

  • Prototype: send_coords(coords, speed, mode)

  • Description: Send all coords to robot arm.

  • Parameters

    • coords: a list of coords value(List[float]), length 6.
    • speed: (int) 0 ~ 100
    • mode: (int): 0 - angular, 1 - linear

  • Example

    from pymycobot.mycobot import MyCobot
from pymycobot.genre import Coord


mycobot = MyCobot('/dev/ttyUSB0')
mycobot.send_coords([160, 160, 160, 0, 0, 0], 70, 0)

sync_send_angles

  • Prototype: sync_send_angles(degrees, speed, timeout=7)

  • Description: Send the angle in synchronous state and return when the target point is reached

  • Parameters

    • degrees: a list of degree value(List[float]), length 6.
    • speed: (int) 0 ~ 100
    • timeout: default 7s.

sync_send_coords

  • Prototype: sync_send_coords(coords, speed, mode, timeout=7)

  • Description: Send the coord in synchronous state and return when the target point is reached

  • Parameters

    • coords: a list of coords value(List[float])
    • speed: (int) 0 ~ 100
    • mode: (int): 0 - angular, 1 - linear
    • timeout: default 7s.

is_in_position

  • Prototype: is_in_position(data, flag)

  • Description: Judge whether in the position.

  • Parameters

    • data: A data list, angles or coords, length 6.
    • flag: Tag the data type, 0 - angles, 1 - coords.

  • Returns

    • 1 - true
    • 0 - false
    • -1 - error

JOG mode and operation

jog_angle

  • Prototype: jog_angle(joint_id, direction, speed)

  • Description: Jog control angle

  • Parameters

    • joint_id: (int) 1 ~ 6
    • direction: 0 - decrease, 1 - increase
    • speed: 0 ~ 100

jog_coord

  • Prototype: jog_coord(coord_id, direction, speed)

  • Description: Jog control coord.

  • Parameters

    • coord_id: (int) 1 ~ 6
    • direction: 0 - decrease, 1 - increase
    • speed: 0 ~ 100

jog_stop

  • Prototype: jog_stop()

  • Description: Stop jog moving.

pause

  • Prototype: pause()

  • Description: Pause movement.

resume

  • Prototype: resume()

  • Description: Recovery movement.

stop

  • Prototype: stop()

  • Description: Stop moving.

is_paused

  • Prototype: is_paused()

  • Description: Judge whether the manipulator pauses or not.

  • Returns :

    • 1 - paused
    • 0 - not paused
    • -1 - error

set_encoder

  • Prototype: set_encoder(joint_id, encoder)

  • Description: Set a single joint rotation to the specified potential value.

  • Parameters

    • joint_id: (int) 1 ~ 6
    • encoder: 0 ~ 4096

get_encoder

  • Prototype: get_encoder(joint_id)

  • Description:Obtain the specified joint potential value.

  • Parameters: joint_id: (int) 1 ~ 6

  • Returns: encoder: 0 ~ 4096

set_encoders

  • Prototype: set_encoders(encoders, sp)

  • Description: Set the six joints of the manipulator to execute synchronously to the specified position.

  • Parameters:

    • encoders: A encoder list, length 6.
    • sp: speed 0 - 100

get_encoders

  • Prototype: get_encoders()

  • Description: Get the six joints of the manipulator.

  • Returns: the list of encoder (list)

Running status and Settings

get_speed

  • Prototype: get_speed()

  • Description: Get speed.

  • Returns: speed: (int)

set_speed

  • Prototype: set_speed(speed)

  • Description: Set speed.

  • Parameters: speed: (int) 0 ~ 100

set_joint_min

  • Prototype: set_joint_min(id, angle)

  • Description: Sets the minimum angle for the specified joint.

  • Parameters:

    • id: (int) joint id 1-6.
    • angle: 0 - 180.

set_joint_max

  • Prototype: set_joint_max(id, angle)

  • Description: Sets the maximum angle of the specified joint.

  • Parameters:

    • id: (int) joint id 1-6.
    • angle: 0 - 180.

get_joint_min_angle

  • Prototype: get_joint_min_angle()

  • Description: Gets the minimum movement angle of the specified joint

  • Parameters: joint_id: (int)

  • Returns: angle value (float)

get_joint_max_angle

  • Prototype: get_joint_max_angle()

  • Description: Gets the maximum movement angle of the specified joint

  • Parameters: joint_id: (int)

  • Returns: angle value (float)

Servo control

is_servo_enable

  • Prototype: is_servo_enable(servo_id)

  • Description: Determine whether all steering gears are connected

  • Parameters: servo_id (int) 1 ~ 6

  • Returns

    • 0: disable
    • 1: enable
    • -1: error

is_all_servo_enable

  • Prototype: is_all_servo_enable()

  • Description: Determine whether the specified steering gear is connected

  • Returns

    • 0: disable
    • 1: enable
    • -1: error

set_servo_data

  • Prototype: set_servo_data(servo_no, data_id, value)

  • Description: Set the data parameters of the specified address of the steering gear.

  • Parameters:

    • servo_no: Serial number of articulated steering gear, 1 - 6.
    • data_id: Data address.
    • value: 0 - 4096

get_servo_data

  • Prototype: get_servo_data(servo_no, data_id)

  • Description: Read the data parameter of the specified address of the steering gear.

  • Parameters:

    • servo_no: Serial number of articulated steering gear, 1 - 6.
    • data_id: Data address.

  • Returns: value: 0 - 4096

    • 0: disable
    • 1: enable
    • -1: error

set_servo_calibration

  • Prototype: set_servo_calibration(servo_no)

  • Description: The current position of the calibration joint actuator is the angle zero point, and the corresponding potential value is 2048.

  • Parameters:

    • servo_no: Serial number of articulated steering gear, 1 - 6.

release_servo

  • Prototype: release_servo(servo_id)

  • Description: Power off designated servo

  • Parameters: servo_id: 1 ~ 6

focus_servo

  • Prototype: focus_servo(servo_id)

  • Description: Power on designated servo

  • Parameters: servo_id: 1 ~ 6

Atom IO

set_color

  • Prototype: set_color(r, g, b)

  • Description: Set the color of the light on the top of the robot arm.

  • Parameters

    • r: 0 ~ 255
    • g: 0 ~ 255
    • b: 0 ~ 255

set_pin_mode

  • Prototype: set_pin_mode(pin_no, pin_mode)

  • Description: Set the state mode of the specified pin in atom.

  • Parameters

    • pin_no (int): Pin number.
    • pin_mode (int): 0 - input, 1 - output, 2 - input_pullup

set_digital_output()

  • Parameters

    • pin_no (int):
    • pin_signal (int): 0 / 1

get_digital_input()

  • Parameters: pin_no (int)

  • Return: signal value

set_pwm_output()

  • Prototype: set_pwm_output(channel, frequency, pin_val)

  • Description: PWM control.

  • Parameters

    • channel (int): IO number.
    • frequency (int): clock frequency
    • pin_val (int): Duty cycle 0 ~ 256; 128 means 50%

get_gripper_value

  • Prototype: get_gripper_value()

  • Description: Get gripper value

  • Return: gripper value (int)

set_gripper_state

  • Prototype: set_gripper_state(flag, speed)

  • Description: Set gripper switch state

  • Parameters

    • flag (int): 0 - open, 1 - close
    • speed (int): 0 ~ 100

set_gripper_value

  • Prototype: set_gripper_value(value, speed)

  • Description: Set gripper value

  • Parameters

    • value (int): 0 ~ 100
    • speed (int): 0 ~ 100

set_gripper_ini

  • Prototype: set_gripper_ini()

  • Description: Set the current position to zero, set current position value is 2048.

is_gripper_moving

  • Prototype: is_gripper_moving()

  • Description: Judge whether the gripper is moving or not

  • Returns

    • 0 : not moving
    • 1 : is moving
    • -1: error data

get_basic_input

  • Prototype: get_basic_input(pin_no)

  • Description: Get bottom pin.

  • Parameters

    • pin_no (int) Pin number.

  • Return: pin_signal (int) 0 / 1

set_basic_output

  • Prototype: set_basic_output(pin_no, pin_signal)

  • Description: Set bottom pin.

  • Parameters

    • pin_no (int) Pin number.
    • pin_signal (int): 0 / 1

set_ssid_pwd

  • Prototype: set_ssid_pwd(account, password)

  • Description: Change connected wifi.(Apply to m5 or seeed)

  • Parameters

    • account (str) new wifi account.
    • password (str): new wifi password.

get_ssid_pwd

  • Prototype: get_ssid_pwd()

  • Description: Get connected wifi account and password.(Apply to m5 or seeed)

  • Return: (account, password).

set_server_port

  • Prototype: set_server_port(port)

  • Description: Change the connection port of the server.

  • Parameters

    • port: (int) The new connection port of the server.

get_tof_distance

  • Prototype: get_tof_distance()

  • Description: Get the detected distance (Requires external distance detector).

  • Return: int The unit is mm.

get_tool_reference

  • Prototype: get_tool_reference()

  • Description: Get tool coordinate system.

  • Return: list [x, y, z, rx, ry, rz].

set_tool_reference

  • Prototype: set_tool_reference(coords)

  • Description: Set tool coordinate system.

  • Parameters:

    • coords: (list) [x, y, z, rx, ry, rz].

set_world_reference

  • Prototype: set_world_reference(coords)

  • Description: Set world coordinate system.

  • Parameters:

    • coords: (list) [x, y, z, rx, ry, rz].

get_world_reference

  • Prototype: get_world_reference()

  • Description: Get world coordinate system.

  • Return: list [x, y, z, rx, ry, rz].

set_reference_frame

  • Prototype: set_reference_frame(rftype)

  • Description: Set base coordinate system.

  • Parameters:

    • rftype: 0 - base 1 - tool.

get_reference_frame

  • Prototype: get_reference_frame()

  • Description: Get base coordinate system.

  • Return: 0 - base 1 - tool.

set_movement_type

  • Prototype: set_movement_type(move_type)

  • Description: Set movement type.

  • Parameters:

    • move_type: 1 - movel, 0 - moveJ.

get_movement_type

  • Prototype: get_movement_type()

  • Description: Get movement type.

  • Return: 1 - movel, 0 - moveJ.

set_end_type

  • Prototype: set_end_type(end)

  • Description: Set end coordinate system.

  • Parameters:

    • end: 0 - flange, 1 - tool.

get_end_type

  • Prototype: get_end_type()

  • Description: Get end coordinate system.

  • Return: 0 - flange, 1 - tool.

get_plan_speed

  • Prototype: get_plan_speed()

  • Description: Get planning speed.

  • Return: [ movel planning speed, movej planning speed].

get_plan_acceleration

  • Prototype: get_plan_acceleration()

  • Description: Get planning acceleration.

  • Return: [ movel planning acceleration, movej planning acceleration].

set_plan_speed

  • Prototype: set_plan_speed(speed, is_linear)

  • Description: Set planning speed.

  • Parameters

    • speed (int) 0 - 100.
    • is_linear (int): 0 / 1 (0 ->joint, 1 -> line)

set_plan_acceleration

  • Prototype: set_plan_acceleration(acceleration, is_linear)

  • Description: Set planning acceleration.

  • Parameters

    • acceleration (int) 0 - 100.
    • is_linear (int): 0 / 1 (0 ->joint, 1 -> line)

get_servo_speeds

  • Prototype: get_servo_speeds()

  • Description: Get joint velocity.

  • Return: list Speed of each joint.

get_servo_currents

  • Prototype: get_servo_currents()

  • Description: Get joint current.

  • Return: list Current of each joint.

get_servo_voltages

  • Prototype: get_servo_voltages()

  • Description: Get joint voltage.

  • Return: list Voltage of each joint.

get_servo_status

  • Prototype: get_servo_status()

  • Description: Get the state of each joint.

  • Return: list the state of each joint.

get_servo_temps

  • Prototype: get_servo_temps()

  • Description: Get the temperature of each joint.

  • Return: list temperature of each joint.

init_eletric_gripper

  • Prototype: init_eletric_gripper()

  • Description: Electric gripper initialization (it needs to be initialized once after inserting and removing the gripper) (only for 350)

set_eletric_gripper

  • Prototype: set_eletric_gripper(status)

  • Description: Set Electric Gripper Mode (only for 350).

  • Parameters

    • status (int): 0 - open, 1 - close.

set_encoders_drag

  • Prototype: set_encoders_drag(encoders, speeds)

  • Description: Send all encoders and speeds

  • Parameters

    • encoders (list) : encoders list.
    • speeds: Obtained by the get_servo_speeds() method

set_refresh_mode

  • Prototype: set_refresh_mode(mode)

  • Description: Set command refresh mode

  • Parameters

    • mode: 0 - with interpolation 1 - No interpolation

Raspberry pi -- GPIO

gpio_init

  • Prototype: gpio_init()

  • Description: Init GPIO module, and set BCM mode.

gpio_output

  • Prototype: gpio_output(pin, v)

  • Description: Set GPIO port output value.

  • Parameters

    • pin (int) Pin number.
    • v (int): 0 / 1

Angle

from pymycobot import Angle

Description

Instance class of joint. It's recommended to use this class to select joint.

Coord

from pymycobot import Coord

Description

Instance class of coord. It's recommended to use this class to select coord.

utils (Module)

This module support some help method.

Usage:

from pymycobot import utils

get_port_list

  • Prototype: get_port_list()

  • Description: Get the all serial port list.

  • Return: serial port list (list)

detect_port_of_basic

  • Prototype: detect_port_of_basic()

  • Description: Returns the serial port string of the first detected M5 Basic. If it is not found, it returns None.

  • Return: detected port (str) or None

  • Example:

    from pymycobot import MyCobot, utils

port = utils.detect_port_of_basic()
if port is None:
 raise Exception('Detection failed.')
mycobot = MyCobot(port, 115200)

MyCobotSocket

Note: raspberryPi version Only supports python3 The robotic arm that uses this class of premise has a server and has been turned on.

Use TCP/IP to control the robotic arm

Client

# demo
from pymycobot import MyCobotSocket
# Port 9000 is used by default
mc = MyCobotSocket("192.168.10.10","9000")

mc.connect("/dev/ttyAMA0","1000000")

res = mc.get_angles()
print(res)

mc.send_angles([0,0,0,0,0,0],20)
...

Server

Server file is in the demo folder

socket control

Note: Most of the methods are the same as the class mycobot, only the new methods are listed here.

connect

  • Prototype: connect(serialport, baudrate, timeout)

  • Description: Connect the robot arm through the serial port and baud rate

  • Parameters

    • serialport: (str) default /dev/ttyAMA0.
    • baudrate: default 1000000.
    • timeout: default 0.1.

set_gpio_mode

  • Prototype: set_gpio_mode(mode)

  • Description: Set pin coding method.

  • Parameters

    • mode (str) "BCM" or "BOARD".

set_gpio_out

  • Prototype: set_gpio_out(pin_no, mode)

  • Description: Set the pin as input or output.

  • Parameters

    • pin_no (int) pin id.
    • mode (str) "in" or "out"

set_gpio_output

  • Prototype: set_gpio_output(pin_no, state)

  • Description: Set the pin to high or low level.

  • Parameters

    • pin_no (int) pin id.
    • state (int) 0 or 1

get_gpio_in

  • Prototype: get_gpio_in(pin_no)

  • Description: Get pin level status.

  • Parameters

    • pin_no (int) pin id.
# Set up the demo of the suction pump
import time
from pymycobot import MyCobotSocket
# connect server
m = MyCobotSocket("192.168.10.10", '9000')
# default serialport:/dev/ttyAMA0 Baudrate:1000000
m.connect()

m.set_gpio_mode("BCM")
m.set_gpio_out(20, "out")
m.set_gpio_out(21, "out")
# open
m.set_gpio_output(20, 0)
m.set_gpio_output(21, 0)
time.sleep(3)
# close
m.set_gpio_output(20, 1)
m.set_gpio_output(21, 1)

MyBuddy

MyBuddy Python API

focus_servo(id, servo_id)

Power on designated servo

  • Parameters

    • id – 1/2/3 (L/R/W)

    • servo_id – 1 - 6

get_acceleration(id)

Read acceleration during all moves

  • Parameters

    id – 1/2/3 (L/R/W)

get_angles(id)

Get the degree of all joints.

  • Parameters

    id – 1/2/3 (L/R/W)

  • Returns

    A float list of all degree.

  • Return type

    list

get_basic_input(pin_no)

Get basic input for M5 version.

  • Parameters

    pin_no – (int) pin port number (0 - 20).

get_coords(id)

  • Parameters

    id – 1/2/3 (L/R/W).

get_digital_input(id, pin_no)

singal value

  • Parameters

    • id – 1/2 (L/R)

    • pin_no (int) – 1 - 5

get_encoder(id, joint_id)

Obtain the specified joint potential value.

  • Parameters

    • id – 1/2/3 (L/R/W).

    • joint_id – (int) 1 ~ 6

  • Returns

    0 ~ 4096

get_encoders(id)

Get the six joints of the manipulator

  • Parameters

    id – 1/2/3 (L/R/W).

  • Returns

    The list of encoders

get_end_type(id)

Get end coordinate system

  • Parameters

    id – 0/1/2 (ALL/L/R)

  • Returns

    0 - flange 1 - tool

get_gripper_value(id)

Get the value of gripper.

  • Parameters

    id – 1/2 (L/R)

  • Returns

    gripper value (int)

get_joint_current(id, joint_id)

Get Collision Current

  • Parameters

    • id – 0/1/2 (ALL/L/R)

    • joint_id – 1 - 6

get_joint_max_angle(id, joint_id)

Gets the maximum movement angle of the specified joint

  • Parameters

    • id – 1/2/3 (L/R/W)

    • joint_id – (int) 1 - 6

  • Returns

    angle value(float)

get_joint_min_angle(id, joint_id)

Gets the minimum movement angle of the specified joint

  • Parameters

    • id – 1/2/3 (L/R/W)

    • joint_id – (int) 1 - 6

  • Returns

    angle value(float)

get_movement_type(id)

Get movement type

  • Parameters

    id – 0/1/2 (ALL/L/R)

  • Returns

    1 - movel 0 - moveJ

get_plan_acceleration()

Get planning acceleration

  • Returns

    [movel planning acceleration, movej planning acceleration].

get_plan_speed()

Get planning speed

  • Returns

    [movel planning speed, movej planning speed].

get_reference_frame(id)

Get the base coordinate system

  • Parameters

    id – 0/1/2 (ALL/L/R)

  • Returns

    0 - base 1 - tool.

get_robot_id()

Detect this robot id

get_robot_version()

Get cobot version

  • Returns

    1 mycobotPro: 101

  • Return type

    mycobot

get_servo_currents(id)

Get joint current

  • Parameters

    id – 1/2/3 (L/R/W)

  • Returns

    value mA

get_servo_data(id, servo_no, data_id)

Read the data parameter of the specified address of the steering gear.

  • Parameters

    • id – 1/2/3 (L/R/W)

    • servo_no – Serial number of articulated steering gear, 1 - 6.

    • data_id – Data address.

  • Returns

    0 - 4096 0 - disable 1 - enable -1 - error

  • Return type

    values

get_servo_status(id)

Get joint status

  • Parameters

    id – 1/2/3 (L/R/W)

  • Returns

    [voltage, sensor, temperature, current, angle, overload], a value of 0 means no error

get_servo_temps(id)

Get joint temperature

  • Parameters

    id – 1/2/3 (L/R/W)

get_servo_voltages(id)

Get joint voltages

  • Parameters

    id – 1/2/3 (L/R/W)

  • Returns

    volts < 24 V

get_speed(id)

Get speed

  • Parameters

    id – 1/2/3 (L/R/W).

  • Returns

    (int)

  • Return type

    speed

get_system_version()

Get cobot version

  • Returns

    1 mycobotPro: 101

  • Return type

    mycobot

get_tool_reference(id)

Get tool coordinate system

  • Parameters

    id – 0/1/2 (ALL/L/R)

get_world_reference(id)

Get the world coordinate system

  • Parameters

    id – 0/1/2 (ALL/L/R)

is_all_servo_enable(id)

Determine whether the specified steering gear is connected

  • Parameters

    id – 1/2/3 (L/R/W)

  • Returns

    0 - disable 1 - enable -1 - error

is_controller_connected()

Wether connected with Atom.

is_free_mode(id)

Check if it is free mode

  • Parameters

    id – 0/1/2/3 (ALL/L/R/W)

  • Returns

    0/1

is_gripper_moving(id)

Judge whether the gripper is moving or not

  • Parameters

    id – 1/2 (L/R)

  • Returns

    not moving 1 : is moving -1: error data

  • Return type

    0

is_in_position(id, mode, data)

Judge whether in the position.

  • Parameters

    • id – ALL/L/R/W (0/1/2/3).

    • mode – 1 - coords, 0 - angles

    • data – A data list, angles or coords, length 6.

  • Returns

    True 0 : False -1: Error

  • Return type

    1

is_moving(id)

  • Parameters

    id – ALL/L/R/W (0/1/2/3).

  • Returns

    not moving 1 : is moving -1 : error data

  • Return type

    0

is_paused(id)

Judge whether the manipulator pauses or not.

  • Parameters

    id – ALL/L/R/W (0/1/2/3).

  • Returns

    1 - paused 0 - not paused -1 - error

is_power_on()

Adjust robot arm status

  • Returns

    power on 0 : power off -1: error data

  • Return type

    1

is_servo_enable(id, servo_id)

Determine whether all steering gears are connected

  • Parameters

    • id – 1/2/3 (L/R/W)

    • servo_id – (int) 1 ~ 6

  • Returns

    0 - disable 1 - enable -1 - error

jog_absolute(id, joint_id, angle, speed)

Absolute joint control

  • Parameters

    • id – 1/2/3 (L/R/W).

    • joint_id – int 1-6.

    • angle – int

    • speed – int (0 - 100)

jog_angle(id, joint_id, direction, speed)

Jog control angle.

  • Parameters

    • id – 1/2/3 (L/R/W).

    • joint_id – int 1-6.

    • direction – 0 - decrease, 1 - increase

    • speed – int (0 - 100)

jog_coord(id, coord_id, direction, speed)

Jog control coord.

  • Parameters

    • id – 1/2/3 (L/R/W).

    • coord_id – int 1-6 (x/y/z/rx/ry/rz).

    • direction – 0 - decrease, 1 - increase

    • speed – int (0 - 100)

jog_increment(id, joint_id, increment, speed)

step mode

  • Parameters

    • id – 1/2/3 (L/R/W).

    • joint_id – int 1-6.

    • increment – # TODO 未注明

    • speed – int (1 - 100)

jog_stop(id)

Stop jog moving :param id: 1/2/3 (L/R/W).

joint_brake(id, joint_id)

Make it stop when the joint is in motion, and the buffer distance is positively related to the existing speed

  • Parameters

    • id – 1/2/3 (L/R/W)

    • joint_id – 1 - 6

pause(id)

Pause movement

  • Parameters

    id – ALL/L/R/W (0/1/2/3).

power_off()

Close communication with Atom.

power_on()

Open communication with Atom.

release_all_servos()

release_servo(id, servo_id)

Power off designated servo

  • Parameters

    • id – 1/2/3 (L/R/W)

    • servo_id – 1 - 6.

resume(id)

Recovery movement

  • Parameters

    id – ALL/L/R/W (0/1/2/3).

send_angle(id, joint, angle, speed)

Send one degree of joint to robot arm.

  • Parameters

    • id – 1/2/3 (L/R/W)

    • joint – 1 ~ 6

    • angle – int

    • speed – 1 ~ 100

send_angles(id, degrees, speed, mode)

  • Parameters

    • id – 1/2/3 (L/R/W).

    • degrees – [angle_list]

    • speed – 1 - 100

    • mode – 0 - with interpolation 1 - No interpolation 2 - reserved.

send_coord(id, coord, data, speed)

  • Parameters

    • id – 1/2/3 (L/R/W).

    • coord – 1 ~ 6 (x/y/z/rx/ry/rz)

    • data – int

    • speed – 0 ~ 100

send_coords(id, coords, speed, mode)

Send all coords to robot arm.

  • Parameters

    • id – 1/2/3 (L/R/W).

    • coords – a list of coords value(List[float]), length 6, [x(mm), y, z, rx(angle), ry, rz]

    • speed – (int) 0 ~ 100

    • mode – (int) 0 - moveJ, 1 - moveL, 2 - moveC

set_acceleration(id, acc)

Read acceleration during all moves

  • Parameters

    • id – 1/2/3 (L/R/W)

    • acc – 1 - 100

set_basic_mode(pin_no, pin_mode)

Set base IO, input or output mode

  • Parameters

    • pin_no – 1 - 5

    • pin_mode – 0 - input 1 - output

set_basic_output(pin_no, pin_signal)

Set basic output.

  • Parameters

    • pin_no – pin port number (0 - 20).

    • pin_signal – 0 / 1 (0 - low, 1 - high)

set_color(r=0, g=0, b=0)

Set the light color on the top of the robot arm.

  • Parameters

    • r (int) – 0 ~ 255

    • g (int) – 0 ~ 255

    • b (int) – 0 ~ 255

set_digital_output(id, pin_no, pin_signal)

  • Parameters

    • id – 1/2 (L/R)

    • pin_no (int) – 1 - 5

    • pin_signal (int) – 0 / 1

set_encoder(id, joint_id, encoder, speed)

Set a single joint rotation to the specified potential value.

  • Parameters

    • id – 1/2/3 (L/R/W).

    • joint_id – 1 - 6.

    • encoder – The value of the set encoder.

set_encoders(id, encoders, speed, mode)

Set the six joints of the manipulator to execute synchronously to the specified position.

  • Parameters

    • id – 1/2/3 (L/R/W).

    • encoders – A encoder list, length 6.

    • speed – speed 1 ~ 100

    • mode – 0 - with interpolation 1 - No interpolation 2 - reserved.

set_end_type(id, end)

Set end coordinate system

  • Parameters

    • id – 0/1/2 (ALL/L/R)

    • end – 0 - flange, 1 - tool

set_free_mode(id)

set free mode

  • Parameters

    id – 0/1/2/3 (ALL/L/R/W)

set_gripper_calibration(id)

Set the current position to zero, set current position value is 2048. :param id: 1/2 (L/R)

set_gripper_state(id, flag)

Set gripper switch state

  • Parameters

    • id – 1/2 (L/R)

    • flag (int) – 0 - close, 1 - open

set_gripper_value(id, value)

Set gripper value

  • Parameters

    • id – 1/2 (L/R)

    • value (int) – 0 ~ 100

set_joint_current(id, joint_id, current)

Set Collision Current

  • Parameters

    • id – 0/1/2 (ALL/L/R)

    • joint_id – 1 - 6

    • current – current value

set_joint_max(id, joint_id, angle)

Set the joint maximum angle

  • Parameters

    • id – 1/2/3 (L/R/W)

    • joint_id – int 1-6.

    • angle – 0 ~ 180

set_joint_min(id, joint_id, angle)

Set the joint minimum angle

  • Parameters

    • id – 1/2/3 (L/R/W)

    • joint_id – int 1-6.

    • angle – 0 ~ 180

set_movement_type(id, move_type)

Set movement type

  • Parameters

    • id – 0/1/2 (ALL/L/R)

    • move_type – 1 - movel, 0 - moveJ

set_pin_mode(id, pin_no, pin_mode)

Set the state mode of the specified pin in atom.

  • Parameters

    • id – 1/2 (L/R)

    • pin_no (int) – pin number (1 - 5).

    • pin_mode (int) – 0 - input, 1 - output

set_plan_acceleration(acceleration, is_linear)

Set planning acceleration

  • Parameters

    • acceleration (int) – (0 ~ 100).

    • is_linear – 0 -> joint 1 -> straight line

set_plan_speed(speed, is_linear)

Set planning speed

  • Parameters

    • speed (int) – (0 ~ 100).

    • is_linear – 0 -> joint 1 -> straight line

set_pwm_output(id, channel, frequency, pin_val)

PWM control

  • Parameters

    • id – 1/2 (L/R)

    • channel (int) – IO number (1 - 5).

    • frequency (int) – clock frequency (0/1: 0 - 1Mhz 1 - 10Mhz)

    • pin_val (int) – Duty cycle 0 ~ 100: 0 ~ 100%

set_reference_frame(id, rftype)

Set the base coordinate system

  • Parameters

    • id – 0/1/2 (ALL/L/R)

    • rftype – 0 - base 1 - tool.

set_robot_id(id)

Set this robot id

set_servo_calibration(id, servo_no)

The current position of the calibration joint actuator is the angle zero point,

and the corresponding potential value is 2048.

  • Parameters

    • id – 1/2/3 (L/R/W)

    • servo_no – Serial number of articulated steering gear, 1 - 6.

set_servo_data(id, servo_no, data_id, value)

Set the data parameters of the specified address of the steering gear

  • Parameters

    • id – 1/2/3 (L/R/W)

    • servo_no – Serial number of articulated steering gear, 1 - 6.

    • data_id – Data address.

    • value – 0 - 4096

set_speed(id, speed)

Set speed value

  • Parameters

    • id – 1/2/3 (L/R/W)

    • speed (int) – 0 - 100

set_tool_reference(id, coords)

Set tool coordinate system

  • Parameters

    • id – 0/1/2 (ALL/L/R)

    • coords – a list of coords value(List[float]), length 6. for mycobot :[x(mm), y, z, rx(angle), ry, rz]

set_world_reference(id, coords)

Set the world coordinate system

  • Parameters

    • id – 0/1/2 (ALL/L/R)

    • coords – a list of coords value(List[float]), length 6 [x(mm), y, z, rx(angle), ry, rz]

stop(id)

Stop moving

  • Parameters

    id – ALL/L/R/W (0/1/2/3).

More demo can go to here.

Project details

Verified details

These details have been verified by PyPI
Maintainers
Avatar for granet from gravatar.com granet Avatar for leonidfedorenchik from gravatar.com leonidfedorenchik Avatar for zacharyzhang from gravatar.com zacharyzhang

Unverified details

These details have not been verified by PyPI
Project links
GitHub Statistics

View statistics for this project via Libraries.io, or by using our public dataset on Google BigQuery

Meta

License: MIT License

Author: Elephantrobotics

Requires: Python >=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, != 3.4.*

Classifiers

Release history Release notifications | RSS feed

3.5.0b1 pre-release

3.4.7b1 pre-release

3.4.6

3.4.6b1 pre-release

3.4.5

3.4.4

3.4.3

3.4.2

3.4.1

3.4.0

3.3.9

3.3.8

3.3.7

3.3.7b1 pre-release

3.3.7b0 pre-release

3.3.6

3.3.5

3.3.4

3.3.3

3.3.2

3.3.1

3.3.1b1 pre-release

3.3.0

3.3.0b0 pre-release

3.2.9

3.2.8

3.2.7

3.2.6

3.2.5

3.2.4

3.2.4b3 pre-release

3.2.4b2 pre-release

3.2.4b1 pre-release

3.2.3

3.2.3b1 pre-release

3.2.2

3.2.1

3.2.0

3.2.0b2 pre-release

3.2.0b1 pre-release

3.1.9

3.1.9b3 pre-release

3.1.9b2 pre-release

3.1.9b1 pre-release

3.1.8

3.1.8b2 pre-release

3.1.8b1 pre-release

3.1.7

3.1.6

3.1.6b3 pre-release

3.1.6b2 pre-release

3.1.6b1 pre-release

3.1.5

3.1.3

3.1.2

3.1.1

3.1.0

3.1.0b1 pre-release

3.0.9

3.0.8

3.0.8b2 pre-release

3.0.8b1 pre-release

3.0.7

3.0.6

3.0.5

3.0.5b1 pre-release

3.0.4

3.0.3

3.0.2

3.0.1

3.0.0

3.0.0b2 pre-release

3.0.0b1 pre-release

2.9.9

2.9.8

2.9.8b2 pre-release

2.9.8b1 pre-release

2.9.7

2.9.7b7 pre-release

2.9.7b6 pre-release

2.9.7b5 pre-release

2.9.7b4 pre-release

2.9.7b3 pre-release

2.9.7b2 pre-release

2.9.7b1 pre-release

2.9.6

2.9.5

2.9.4

2.9.3

2.9.3b2 pre-release

2.9.3b1 pre-release

2.9.2

2.9.1

2.9.0

2.9.0b7 pre-release

2.9.0b6 pre-release

2.9.0b5 pre-release

This version

2.9.0b4 pre-release

2.9.0b3 pre-release

2.9.0b2 pre-release

2.9.0b1 pre-release

2.8.1

2.8.0

2.7.6

2.7.5

2.7.5b2 pre-release

2.7.5b1 pre-release

2.7.4

2.7.4b2 pre-release

2.7.4b1 pre-release

2.7.3

2.7.2

2.7.1

2.7.1b4 pre-release

2.7.1b3 pre-release

2.7.1b2 pre-release

2.7.1b1 pre-release

2.7.0

2.6.1

2.6.0

2.6.0b1 pre-release

2.5.9

2.5.8

2.5.7

2.5.6

2.5.5

2.5.4

2.5.3

2.5.2

2.5.1

2.5.0

2.4.2

2.4.1

2.3.7

2.3.6

2.3.5

2.3.3

2.2.1

2.1.2

2.1.1

2.0.0

1.0.7

1.0.6

1.0.5

1.0.4

1.0.1

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

pymycobot-2.9.0b4.tar.gz (43.2 kB view hashes)

Uploaded Source

Built Distribution

pymycobot-2.9.0b4-py3-none-any.whl (43.6 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page