Skip to main content

SDK to simplify common workflows for Network Devices.

Project description

Build Status Coverage Status

Introduction

pyntc is an open source multi-vendor Python library that establishes a common framework for working with different network APIs & device types (including IOS devices)

It's main purpose is to simplify the execution of common tasks including:

  • Executing commands
  • Copying files
  • Upgrading devices
  • Rebooting devices
  • Saving / Backing Up Configs

Supported Platforms

  • Cisco AireOS - uses netmiko (SSH)
  • Cisco ASA - uses netmiko (SSH)
  • Cisco IOS platforms - uses netmiko (SSH)
  • Cisco NX-OS - uses pynxos (NX-API)
  • Arista EOS - uses pyeapi (eAPI)
  • Juniper Junos - uses PyEz (NETCONF)
  • F5 Networks - uses f5-sdk (ReST)

Installing pyntc

Option 1:

"pip install pyntc" or "pip install pyntc --upgrade"

Option 2:

git clone https://github.com/networktocode/pyntc.git
cd pyntc
pip install poetry
poetry install

Getting Started with pyntc

There are two ways to get started with pyntc.

The first way is to use the ntc_device object. Just pass in all required parameters to the object to initialize your device. Here we are showing the import, but renaming the object to NTC.

>>> from pyntc import ntc_device as NTC
>>>

Like many libraries, we need to pass in the host/IP and credentials. Because this is a multi-vendor/API library, we also use the device_type parameter to identify which device we are building an instance of.

pyntc currently supports four device types:

  • cisco_aireos_ssh
  • cisco_asa_ssh
  • cisco_ios_ssh
  • cisco_nxos_nxapi
  • arista_eos_eapi
  • juniper_junos_netconf
  • f5_tmos_icontrol

The example below shows how to build a device object when working with a Cisco IOS router.

>>> # CREATE DEVICE OBJECT FOR AN IOS DEVICE
>>>
>>> csr1 = NTC(host='csr1', username='ntc', password='ntc123', device_type='cisco_ios_ssh')
>>>

And here is an object for a Cisco Nexus device:

>>> # CREATE DEVICE OBJECT FOR A NEXUS DEVICE
>>>
>>> nxs1 = NTC(host='nxos-spine1', username='ntc', password='ntc123', device_type='cisco_nxos_nxapi')
>>>

The second way to get started with pyntc is to use the pyntc configuration file. This was modeled after Arista's .eapi.conf file. Our file is called .ntc.conf

This simplifies creating device objects since you no longer need to specify credentials and other device specific parameters when you build the device object. Instead, they are stored in the conf file.

pyntc Configration File

  • filename: .ntc.conf
  • Priority of locating the conf file:
    • filename param in ntc_device_by_name
    • Environment Variable aka PYNTC_CONF
    • Home directory .ntc.conf
  • Specify device_type and a name
  • host is not required if the name is the device's FQDN
  • Four supported device types: cisco_nxos_nxapi, cisco_ios_ssh, arista_eos_eapi, and juniper_junos_netconf

Here is an example .ntc.conf file:

[cisco_nxos_nxapi:nxos-spine1]
host: 31.220.64.117
username: ntc
password: ntc123
transport: http

[cisco_ios_ssh:csr1]
host: 176.126.88.94
username: ntc
password: ntc123
port: 22

[juniper_junos_netconf:vmx1]
host: 176.126.88.99
username: ntc
password: ntc123

We can now build device objects just by referencing the name of the device from the conf file.

>>> from pyntc import ntc_device_by_name as NTCNAME
>>>
>>> csr1 = NTCNAME('csr1')
>>>
>>> nxs1 = NTCNAME('nxos-spine1')
>>>
>>> vmx1 = NTCNAME('vmx1')

Once the device object is creating using either ntc_device or ntc_device_by_name, you can start using the built-in device methods in pyntc.

Note: the only method and property not supported on all devices is install_os. It is not supported on Juniper Junos devices.

Gathering Facts

  • Use facts device property

On a Nexus device:

>>> nxs1 = NTCNAME('nxos-spine1')
>>>
>>> nxs1.facts
{'vendor': 'cisco', 'interfaces': [], u'hostname': 'nxos-spine1', u'os_version': '7.1(0)D1(1) [build 7.2(0)ZD(0.17)]', u'serial_number': 'TM600C2833B', u'model': 'NX-OSv Chassis', 'vlans': ['1']}
>>>
>>> print(json.dumps(nxs1.facts, indent=4))
{
    "vendor": "cisco",
    "interfaces": [],
    "hostname": "nxos-spine1",
    "os_version": "7.1(0)D1(1) [build 7.2(0)ZD(0.17)]",
    "serial_number": "TM600C2833B",
    "model": "NX-OSv Chassis",
    "vlans": [
        "1"
    ]
}

On an IOS device:

>>> csr1 = NTCNAME('csr1')
>>>
>>> print(json.dumps(csr1.facts, indent=4))
{
    "uptime": 87060,
    "vendor": "cisco",
    "uptime_string": "01:00:11:00",
    "interfaces": [
        "GigabitEthernet1",
        "GigabitEthernet2",
        "GigabitEthernet3",
        "GigabitEthernet4",
        "Loopback100"
    ],
    "hostname": "csr1",
    "ios": {
        "config_register": "0x2102"
    },
    "fqdn": "N/A",
    "os_version": "15.5(1)S1",
    "serial_number": "",
    "model": "CSR1000V",
    "vlans": []
}

Sending Show Commands

  • show method
  • Note: API enabled devices return JSON by default
>>> nxs1.show('show hostname')
{'hostname': 'nxos-spine1'}
>>>
  • Use raw_text=True to get unstructured data from the device
>>> nxs1.show('show hostname', raw_text=True)
'nxos-spine1 \n'
>>>

Sending Multiple Commands

  • show_list method
>>> cmds = ['show hostname', 'show run int Eth2/1']

>>> data = nxs1.show_list(cmds, raw_text=True)
>>> for d in data:
...   print(d)
...
nxos-spine1

!Command: show running-config interface Ethernet2/1
!Time: Wed Jan  6 18:10:01 2016
version 7.1(0)D1(1)
interface Ethernet2/1
  switchport
  no shutdown

Config Commands

  • Use config and config_list
>>> csr1.config('hostname testname')
>>>
>>> csr1.config_list(['interface Gi3', 'shutdown'])
>>>

Viewing Running/Startup Configs

  • Use running_config and start_up device properties
    • Only showing partial config (manually shortened for this slide)
>>> run = csr1.running_config
>>>
>>> print(run)
Building configuration...

Current configuration : 2062 bytes
!
! Last configuration change at 18:26:59 UTC Wed Jan 6 2016 by ntc
!
version 15.5
service timestamps debug datetime msec

lldp run
cdp run
!
ip scp server enable
!
interface GigabitEthernet1
 ip address 10.0.0.50 255.255.255.0
 cdp enable

Copying files

  • file_copy method
>>> devices = [csr1, nxs1]
>>>
>>> for device in devices:
...   device.file_copy('newconfig.cfg')
...
>>>

Save Configs

  • save method

copy run start for Cisco/Arista and commit for Juniper

>>> csr1.save()
True

You can also do the equivalent of copy running-config <filename> by specifying a filename:

>>> csr1.save('mynewconfig.cfg')
True

Backup Configs

Backup current running configuration and store it locally

>>> csr1.backup_running_config('csr1.cfg')
>>>

Reboot

Reboot target device

Parameters:

  • timer=0 by default
  • confirm=False by default
>>> csr1.reboot(confirm=True)
>>>

Installing Operating Systems

>>> device.install_os('nxos.7.0.3.I2.1.bin')
>>>

Full workflow example:

>>> device.file_copy('nxos.7.0.3.I2.1.bin')
>>> device.install_os('nxos.7.0.3.I2.1.bin')
>>> device.save()
>>> device.reboot()          # IF NEEDED, NXOS automatically reboots
>>>

Contributing

This section describes how to install pyntc for development, how to run tests, and make sure you are a good contributor.

Branches

  • main - Reserved for released code
  • develop - Work in progress on the main roadmap
  • <feature> - Individual feature branches, should be PR'd to develop.

Installing dependencies for local development

This repository uses poetry for dependency management.

For best results, you should use virtualenv and virtualenvwrapper, which can both be installed to your system packages using pip install virtualenv virtualenvwrapper.

You'll also need Python 3.6+ as your interpreter. See the virtualenv documentation on choosing the correct Python interpretery binary if your system provides multiple versions.

Follow these steps to set up your local development environment:

# Make a new virtualenv named "pyntc" and activate it
$ mkvirtualenv pyntc
# Double check your version
$ python --version
Python 3.7.7
# Install poetry
$ pip install poetry
# Install project dependencies as well as development dependencies
$ poetry install

In addition to poetry, you may want to install tox which is a test environment controller and runner.

# Make sure you're in the "pyntc" virtualenv, skip this step if you already are
$ workon pyntc
# Install tox
$ pip install tox

Running tests locally

The easiest way to run tests locally is to directly invoke the unittest module directly.

Test modules are located in ./test/unit/ and fixtures in ./test/fixtures/.

# Run all tests locally
$ python -m unittest discover ./test/unit

It's also possible to run local tests using tox if you have it installed. This will create separate virtualenvs for each Python version in the tox.ini configuration, and download all dependencies separately.

# Run all tests against multiple Python versions
$ tox

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

pyntc-0.14.0.tar.gz (42.5 kB view hashes)

Uploaded Source

Built Distribution

pyntc-0.14.0-py3-none-any.whl (50.0 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page