Anel NET-PwrCtrl library and command line utility
This is a library and command line utility for Anel NET-PwrCtrl network controllable extension leads. It offers the functionality provided by the UDP protocol. Devices can be found by network discovery and saved into a configuration file for easy access.
The UDP protocol has to be enabled in the NET-PwrCtrl devices in order to control them with this tool.
## Security Notes
Enabling the UDP protocol is quite insane from a security standpoint. The user credentials are tranmitted as plaintext in the commands requiring authentication. Never use this tool or this protocol if you cannot live with the plugs being controlled by anyone having access to the network!
easy_install3 –user pypwrctrl
Or checkout the repository and run:
./setup.py install –user
You can remove the ‘–user’ in both methods to install for all users of your system (requires root privileges).
pypwrctrl depends only on ‘python3’ and ‘python3-setuptools’ for installation.
For simple usage information type:
This tutorial will give a more detailed introduction with examples.
First configure your NET-PwrCtrl to handle the UDP protocol (please note Security Notes above) and set both ports to something above the privileged ports (>1024). These configuration options are in the Lan page of the webinterface. I am going to assume a sending port of 4165, a receiving port of 4166, and the user ‘ulf’ with the password ‘secret’ in the following examples.
First let us try to discover the device:
pypwrctrl -d -i 4165 -o 4166 -u ulf -p secret show
If you do not see any devices please make sure that UDP is enabled, the right ports are configured, and the device is reachable from the device you are testing this on.
The -d is the switch which enables network discovery and the other switches tell the program which ports and user credentials are used.
Always typing the port options is tiresome. We should save them in the configuration file:
pypwrctrl -i 4165 -o 4166 -u ulf -p secret save
Now we can discover devices with a simpler command:
pypwrctrl -d show
You can also save the discovered devices and plugs for faster access:
pypwrctrl -d save
Every configuration item can be changed by setting it with its command line switch and applying the ‘save’ command.
Now to the part you are actually here for: Controlling the state of the power outlets. Turning a power outlet on is as simple as writing:
pypwrctrl on 192.168.1.50 1
Turning it off again is just as easy:
pypwrctrl off 192.168.1.50 1
Both commands change the state of the socket ‘1’ of the device at ‘192.168.1.50’. You can leave out the address if you have only one device or want to control all devices with one command.
Did you know that you can assign names to the individual sockets? Set a sensible name in the webinterface of your device and use it to select the socket in pypwrctrl:
pypwrctrl on fan
Devices can also be named.
- resend messages
- add ability to control devices without configuration and ‘-d’
- test with more than one device and other product versions (used NET-PwrCtrl HOME)
pypwrctrl is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
pypwrctrl is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with pypwrctrl. If not, see [http://www.gnu.org/licenses/](http://www.gnu.org/licenses/).
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
|Filename, size||File type||Python version||Upload date||Hashes|
|Filename, size pypwrctrl-0.1.3.tar.gz (6.8 kB)||File type Source||Python version None||Upload date||Hashes View|