pyroe 0.8.1

utilities of alevin-fry

pyroe

Introduction

Alevin-fry is a fast, accurate, and memory frugal quantification tool for preprocessing single-cell RNA-sequencing data. Detailed information can be found in the alevin-fry pre-print, and paper.

The pyroe package provides useful functions for analyzing single-cell or single-nucleus RNA-sequencing data using alevin-fry, which consists of

1. Preparing the spliced + intronic (splici) or spliced + unspliced (spliceu) reference for the USA mode of alevin-fry, which will export a unspliced, a spliced, and an ambiguous molecule count for each gene within each cell.
2. Fetching and loading the preprocessed quantification results of alevin-fry into python as an AnnData object.
3. Converting the mtx format output of alevin-fry (specifically in USA mode) to other formats, such as the AnnData native h5ad format.

Installation

The pyroe package can be accessed from its github repository, installed via pip. To install the pyroe package via pip use the command:

pip install pyroe

To make use of the load_fry function (which, itself, installs scanpy), you should also be sure to install the package with the scanpy extra:

pip install pyroe[scanpy]

Alternatively, pyroe can be installed via bioconda, which will automatically install the variant of the package including load_fry, and will also install bedtools to enable faster construction of the ** reference (see below). This installation can be performed with the command:

conda install pyroe

with the appropriate bioconda channel in the conda channel list.

Preparing a spliced + intronic (splici) reference for quantification with alevin-fry

The USA mode in alevin-fry requires a special index reference. Specifically, it requires either a spliced + intronic (splici)reference or a spliced + unspliced (spliceu) reference. The spliced + intronic (splici) reference contains the spliced transcripts plus the (merged and collapsed) intronic sequences of each gene. The make_splici_txome() function is designed to make the spliced + intronic reference by taking a genome FASTA file and a gene annotation GTF file as the input. Details about the spliced + intronic can be found in Section S2 of the supplementary file of the alevin-fry paper. To run pyroe, you also need to specify the read length argument read_length of the experiment you are working on and the flank trimming length flank_trim_length. A final flank length will be computed as the difference between the read_length and flank trimming length and will be attached to the ends of each intron to absorb the intron-exon junctional reads. To make the splici index using pyroe, one can call pyroe make-spliced+intronic or its alias pyroe make-splici.

Following is an example of calling the pyroe to make the splici index reference. The final flank length is calculated as the difference between the read length and the flank_trim_length, i.e., 5-2=3. This function allows you to add extra spliced and unspliced sequences to the spliced + intronic index, which will be useful when some unannotated sequences, such as mitochondrial genes, are important for your experiment. Note : to make pyroe work more quickly, it is recommended to have the latest version of bedtools (Aaron R. Quinlan and Ira M. Hall, 2010) installed.

pyroe make-spliced+intronic extdata/small_example_genome.fa extdata/small_example.gtf 5 splici_txome \
      --flank-trim-length 2 --filename-prefix transcriptome_splici --dedup-seqs

The pyroe program writes two files to your specified output directory output_dir. They are

• A FASTA file that stores the extracted splici sequences.
• A three columns' transcript-name-to-gene-name file that stores the name of each transcript in the spliced + intronic index reference, their corresponding gene name, and the splicing status (S for spliced and U for unspliced) of those transcripts.

Full usage

usage: pyroe make-spliced+intronic [-h] [--filename-prefix FILENAME_PREFIX]
                         [--flank-trim-length FLANK_TRIM_LENGTH]
                         [--extra-spliced EXTRA_SPLICED]
                         [--extra-unspliced EXTRA_UNSPLICED]
                         [--bt-path BT_PATH] [--dedup-seqs] [--no-bt]
                         [--no-flanking-merge]
                         genome-path gtf-path read-length output-dir

positional arguments:
  genome-path           The path to a gtf file.
  gtf-path              The path to a gtf file.
  read-length           The read length of the single-cell experiment 
                          being processed (determines flank size).
  output-dir            The output directory where splici reference 
                          files will be written.

optional arguments:
  -h, --help            show this help message and exit
  --filename-prefix FILENAME_PREFIX
                        The file name prefix of the generated output files.
  --flank-trim-length FLANK_TRIM_LENGTH
                        Determines the amount subtracted from the read length
                        to get the flank length.
  --extra-spliced EXTRA_SPLICED
                        The path to an extra spliced sequence fasta file.
  --extra-unspliced EXTRA_UNSPLICED
                        The path to an extra unspliced sequence fasta file.
  --bt-path BT_PATH     The path to bedtools v2.30.0 or greater.
  --dedup-seqs          A flag indicates whether identical sequences will be
                          deduplicated.
  --no-bt               A flag indicates whether to disable bedtools.
  --no-flanking-merge   A flag indicates whether introns will be merged after
                          adding flanking length.

the spliced + intronic (splici) index

The spliced + intronic index of a given species consists of the transcriptome of the species, i.e., the spliced transcripts, and the intronic sequences of the species. Within a gene, if the flanked intronic sequences overlap with each other, the overlapped intronic sequences will be collapsed as a single intronic sequence to make sure each base will appear only once in the intronic sequences. For more detailed information, please check the section S2 in the supplementary file of alevin-fry manuscript.

Prepare spliced + unspliced (spliceu) index for quantification with alevin-fry

Recently, He et al. introduced the spliced+unspliced (spliceu) index in alevin-fry. This requires the spliced + unspliced transcriptome. The command to make an spliced + unspliced transcriptome reference is similar to making a spliced + intronic reference. To make the splici index using pyroe, one can call pyroe make-spliced+unspliced or its alias pyroe make-spliceu

pyroe make-spliced+unspliced extdata/small_example_genome.fa extdata/small_example.gtf spliceu_txome \
--filename-prefix transcriptome_spliceu

Full usage

usage: pyroe make-spliced+unspliced [-h] [--filename-prefix FILENAME_PREFIX]
                          [--extra-spliced EXTRA_SPLICED]
                          [--extra-unspliced EXTRA_UNSPLICED]
                          [--bt-path BT_PATH] [--no-bt] [--dedup-seqs]
                          [--write-clean-gtf]
                          genome-path gtf-path output-dir

positional arguments:
  genome-path           The path to a genome fasta file.
  gtf-path              The path to a gtf file.
  output-dir            The output directory where Spliceu reference files
                        will be written.

options:
  -h, --help            show this help message and exit
  --filename-prefix FILENAME_PREFIX
                        The file name prefix of the generated output files.
  --extra-spliced EXTRA_SPLICED
                        The path to an extra spliced sequence fasta file.
  --extra-unspliced EXTRA_UNSPLICED
                        The path to an extra unspliced sequence fasta file.
  --bt-path BT_PATH     The path to bedtools v2.30.0 or greater.
  --no-bt               A flag indicates whether bedtools will be used for
                        generating Spliceu reference files.
  --dedup-seqs          A flag indicates whether identical sequences will be
                        deduplicated.
  --write-clean-gtf     A flag indicates whether a clean gtf will be written
                        if encountered invalid records.

Notes on the input gene annotation GTF files

Pyroe build expanded transcriptome references, the spliced + intronic (splici) transcriptome reference and the spliced + unspliced (spliceu) transcriptome reference based on a genome build FASTA file and a gene annotation GTF file.

The input GTF file will be processed before extracting unspliced sequences. If pyroe finds invalid records, a clean_gtf.gtf file will be generated in the specified output directory. Note : The features extracted in the spliced + unspliced transcriptome will not necessarily be those present in the clean_gtf.gtf file — as this command will prefer the input in the user-provided file wherever possible. More specifically:

1. Each non-gene record has to have a valid transcript_id. If this is not satisfied, it returns an error. Only the records with a valid transcript_id will be written to the clean_gtf.gtf.
2. For gene_id and gene_name metadata field,

• If these two fields are entirely missing in the GTF file, An error will be returned. At the same time, in the clean_gtf.gtf, the two fields will be imputed using the transcript_id fields.
• If one of these two fields is completely missing, a warning will be generated, and the missing field will be imputed using the other one.
• if some records have missing gene_id and/or gene_name, a warning will be printed, and the missing values will be imputed by the following rules: For records miss gene_id or gene_name, impute the missing one using the other one; If both are missing, impute them using transcript_id, which cannot be missing.

3. If there is no "transcript" or "gene" feature record, a warning will be printed. Moreover, those missing records will be imputed using the "exon" feature records: The Start and End site of the gene/transcript will be imputed as the bounds of their corresponding exons.
4. If the boundaries defined in the transcripts'/genes' feature records do not match those implied by their exons' feature records, report a warning but still use transcripts'/genes' feature records to extract unspliced sequences. To be specific, if some but not all transcripts/genes have their corresponding transcripts'/genes' feature records, or the Start and/or End site defined in the transcript/gene feature records do not match the corresponding exons' bounds, then the existing transcripts'/genes' feature records will be used to extract unspliced transcripts. At the same time, in the clean_gtf.gtf, all genes/transcripts that appeared in the exon feature records will have their corresponding transcripts'/genes' feature records, in which the boundaries match the corresponding exons' bounds.

Processing alevin-fry quantification result

The quantification result of alevin-fry can be loaded into python by the load_fry() function. This function takes a output directory returned by alevin-fry quant command as the minimum input, and load the quantification result as an AnnData object. When processing USA mode result, it assumes that the data comes from a single-cell RNA-sequencing experiment. If one wants to process single-nucleus RNA-sequencing data or prepare the single-cell data for RNA-velocity analysis, the output_format argument should be set as snRNA or velocity correspondingly. One can also define customized output format, see the Full Usage section for detail.

Full Usage

load alevin-fry quantification result into an AnnData object

Required Parameters

frydir : str The path to a output directory returned by alevin-fry quant command. \ The directory containing the alevin-fry quantification (i.e. the the quant.json file & alevin subdirectory).

Optional Parameters

output_format : str or dict A string represents one of the pre-defined output formats, which are "scRNA", "snRNA" and "velocity". \ If a customized format of the returned AnnData is needed, one can pass a Dictionary.\ See Notes section for details.

quiet : bool (default: True) True if function should be quiet. False if messages (including error messages) should be printed out.

nonzero : bool (default: False) True if cells with non-zero expression value across all genes should be filtered in each layer. False if unexpressed genes should be kept.

load_fry Notes

The output_format argument takes either a dictionary that defines the customized format or a string that represents one of the pre-defined format of the returned AnnData object.

Each of the pre-defined formats contains a X field and some optional extra AnnData.layers obtained from the submatrices representing unspliced (U), spliced (S) and ambiguous (A) counts returned by alevin-fry.

The following formats are defined:

• "scRNA": This format is recommended for single cell RNA-sequencing experiments. It returns a X field that contains the S+A count of each gene in each cell, and a unspliced field that contains the U count of each gene.

• "snRNA", "all" and "U+S+A": These three formats are the same. They return a X field that contains the U+S+A count of each gene in each cell without any extra layers. It is recommended for single-nucleus RNA-sequencing experiments. CellRanger 7 returns this format for both single-cell and single-nucleus experiments.

• "S+A": It returns a X field that contains the S+A count of each gene in each cell with no extra field.

• "raw": This format uses the S count matrix as the X field and put the U, S, and A counts into three separate layers, which are "unspliced", "spliced" and "ambiguous".

• "velocity": This format is the same as "scRNA", except it contains two extra layers: the "spliced" layer, which contains the S+A counts, and the "unspliced" layer, which contains the U counts.

A custom output format can be defined using a Dictionary specifying the desired format of the output Anndata object.
If the input is not a USA mode quantification directory, this parameter is ignored and the count matrix is returned in the X field of the returned AnnData object. If the input quantification directory contains a USA mode quantification, then there are 3 sub-matrices that can be referenced in the dictionary; 'U', 'S', 'A' containing, respectively, unspliced, spliced and ambiguous counts. The dictionary should have entries of the form key (str) : value (list[str]). The following constraints apply : there should be one key-value pair with the key X, the resulting counts will be returned in the X field of the AnnData object. There can be an arbitrary number of other key-value pairs, but each will be returned as a layer of the resulting AnnData object. Within the key-value pairs, the key refers to the layer name that will be given to the combined count matrix upon output, and the value should be a subset of ['U', 'S', 'A'] that defines which sub-matrices should be summed. For example: {'X' : ['S', 'A'], 'unspliced' : ['U']} will result in a return AnnData object where the X field has a matrix in which each entry corresponds to the summed spliced and ambiguous counts for each gene in each cell, and there is an additional "unspliced" layer, whose counts are taken directly from the unspliced sub-matrix.

Returns

An AnnData object with X and layers corresponding to the requested output_format.

Fetching and loading preprocessed quantification results

The raw data for many single-cell and single-nucleus RNA-seq experiments is publicly available. However, certain datasets are used again and again, to demonstrate data processing in tutorials, as benchmark datasets for novel methods (e.g. for clustering, dimensionality reduction, cell type identification, etc.). In particular, 10x Genomics hosts various publicly available datasets generated using their technology and processed via their Cell Ranger software on their website for download.

We have created a Nextflow-based alevin-fry workflow that one can use to easily quantify single-cell RNA-sequencing data in a single workflow. The pipeline can be found here. To test out this initial pipeline, we have begun to reprocess the publicly-available datasets collected from the 10x website. We have focused the initial effort on standard single-cell and single-nucleus gene-expression data generated using the Chromium v2 and v3 chemistries, but hope to expand the pipeline to more complex protocols soon (e.g. feature barcoding experiments) and process those data as well. We note that these more complex protocols can already be processed with alevin-fry (see the alevin-fry tutorials), but these have just not yet been incorprated into the automated Nextflow-based workflow linked above.

We provide two python functions:

• fetch_processed_quant() can fetch the quantification result of one or more available datasets according to the provided dataset_ids vector, and store them to a local folder.
• load_processed_quant() can fetch the quantification result of one or more available dataset as fetch_processed_quant(), and load them into python as AnnData objects. We also provide a CLI for fetching quantification results.

pyroe fetch-quant 1 3 6

or start python, and run

import pyroe

# fetch, decompress and load the quantification result of dastset #1, 3 and 6
pq_dict = pyroe.load_processed_quant([1,3,6])

# get the ProcessedQuant class object for dataset #1 and #3
pq_ds1 = pq_dict[1]
pq_ds3 = pq_dict[3]

# get the dataset name
pq_ds1.dataset_name
pq_ds3.dataset_name


# get the path to the quantification result
pq_ds1.quant_path
pq_ds3.quant_path

# get the AnnData
pq_ds1.anndata
pq_da3.anndata

Full usage

usage: pyroe fetch-quant [-h] [--fetch_dir FETCH_DIR] [--force] [--delete_tar]
                         [--quiet]
                         dataset-ids [dataset-ids ...]

positional arguments:
  dataset-ids           The ids of the datasets to fetch

optional arguments:
  -h, --help            show this help message and exit
  --fetch_dir FETCH_DIR
                        The path to a directory for storing fetched datasets.
  --force               A flag indicates whether existing datasets will be redownloaded by force.
  --delete_tar          A flag indicates whether fetched tar files will be deleted.
  --quiet               A flag indicates whether help messaged should not be printed.

1. 500 Human PBMCs, 3' LT v3.1, Chromium Controller
2. 500 Human PBMCs, 3' LT v3.1, Chromium X
3. 1k PBMCs from a Healthy Donor (v3 chemistry)
4. 10k PBMCs from a Healthy Donor (v3 chemistry)
5. 10k Human PBMCs, 3' v3.1, Chromium X
6. 10k Human PBMCs, 3' v3.1, Chromium Controller
7. 10k Peripheral blood mononuclear cells (PBMCs) from a healthy donor, Single Indexed
8. 10k Peripheral blood mononuclear cells (PBMCs) from a healthy donor, Dual Indexed
9. 20k Human PBMCs, 3' HT v3.1, Chromium X
10. PBMCs from EDTA-Treated Blood Collection Tubes Isolated via SepMate-Ficoll Gradient (3' v3.1 Chemistry)
11. PBMCs from Heparin-Treated Blood Collection Tubes Isolated via SepMate-Ficoll Gradient (3' v3.1 Chemistry)
12. PBMCs from ACD-A Treated Blood Collection Tubes Isolated via SepMate-Ficoll Gradient (3' v3.1 Chemistry)
13. PBMCs from Citrate-Treated Blood Collection Tubes Isolated via SepMate-Ficoll Gradient (3' v3.1 Chemistry)
14. PBMCs from Citrate-Treated Cell Preparation Tubes (3' v3.1 Chemistry)
15. PBMCs from a Healthy Donor: Whole Transcriptome Analysis
16. Whole Blood RBC Lysis for PBMCs and Neutrophils, Granulocytes, 3'
17. Peripheral blood mononuclear cells (PBMCs) from a healthy donor - Manual (channel 5)
18. Peripheral blood mononuclear cells (PBMCs) from a healthy donor - Manual (channel 1)
19. Peripheral blood mononuclear cells (PBMCs) from a healthy donor - Chromium Connect (channel 5)
20. Peripheral blood mononuclear cells (PBMCs) from a healthy donor - Chromium Connect (channel 1)
21. Hodgkin's Lymphoma, Dissociated Tumor: Whole Transcriptome Analysis
22. 200 Sorted Cells from Human Glioblastoma Multiforme, 3’ LT v3.1
23. 750 Sorted Cells from Human Invasive Ductal Carcinoma, 3’ LT v3.1
24. 2k Sorted Cells from Human Glioblastoma Multiforme, 3’ v3.1
25. 7.5k Sorted Cells from Human Invasive Ductal Carcinoma, 3’ v3.1
26. Human Glioblastoma Multiforme: 3’v3 Whole Transcriptome Analysis
27. 1k Brain Cells from an E18 Mouse (v3 chemistry)
28. 10k Brain Cells from an E18 Mouse (v3 chemistry)
29. 1k Heart Cells from an E18 mouse (v3 chemistry)
30. 10k Heart Cells from an E18 mouse (v3 chemistry)
31. 10k Mouse E18 Combined Cortex, Hippocampus and Subventricular Zone Cells, Single Indexed
32. 10k Mouse E18 Combined Cortex, Hippocampus and Subventricular Zone Cells, Dual Indexed
33. 1k PBMCs from a Healthy Donor (v2 chemistry)
34. 1k Brain Cells from an E18 Mouse (v2 chemistry)
35. 1k Heart Cells from an E18 mouse (v2 chemistry)

The ProcessedQuant class

To store the information of a dataset, we provide the ProcessedQuant class, which can be simply instantiated using a dataset id, for example, ProcessedQuant(2) will return an instance of the ProcessedQuant class containing the detail of dataset #2, 500 Human PBMCs, 3' LT v3.1, Chromium X. This class contains methods for fetching, decompressing and loading the quantification result of the corresponding dataset. After getting an instance of the class, i.e., running pq = ProcessedQuant(dataset_id), one can run the following commands to fetch, decompress and/or load the quantification result of the dataset:

• pq.fetch_quant() fetches the compressed quantification result of the corresponding dataset into a local directory and stores the path in its tar_path attribute.
• pq.decompress_quant() decompresses the fetched quantification result into a local directory and stores the path in its quant_path attribute.
• pq.load_quant() loads the decompressed quantification result into python as an AnnData object and stores the object in its anndata attribute.

Besides, we have some helper function for printing and loading the information of the available datasets:

• ProcessedQuant.get_available_dataset_df() returns the detail of available datasets as a pandas dataframe.
• ProcessedQuant.print_available_datasets() prints the index and name of the available datasets.

Converting quantification results

The convert sub-command of pyroe can convert the output of alevin-fry into several common formats, such as the native AnnData format (h5ad). Further, when performing this conversion, it can organize the unspliced, spliced, and ambiguous counts as desired by the user.

The sub-command takes as input a quantification directory produced by alevin-fry, and an output location. Additionally, the user should pass in command line parameters to describe the desired output structure, and output format. The output structure defines how the U, S, and A layers of the input quantification should be represented in the converted matrix. The syntax for this flag exactly mimics the output_format argument of the load_fry function, which you can read about here. Note that, if you pass in a custom output structure, you should enclose your format description in quotes. For example, to output to an object where the "main" layer (X) contains the sum of U, S, and A, and where there is an additional layer named unspliced having just the unspliced counts, you would pass --output-structure '{ "X" : ["U", "S", "A"], "unspliced" : ["U"]}'.

If you do not explicitly provide an --output-format, the default of h5ad will be used.

convert command full usage

usage: pyroe convert [-h] [--output-structure OUTPUT_STRUCTURE] [--output-format OUTPUT_FORMAT] quant_dir output

positional arguments:
  quant_dir             The input quantification directory containing the matrix to be converted.
  output                The output name where the quantification matrix should be written. For `csvs` output format, this will be a directory. For all others, it will be a file.

optional arguments:
  -h, --help            show this help message and exit
  --output-structure OUTPUT_STRUCTURE
                        The structure that U,S and A counts should occupy in the output matrix.
  --output-format OUTPUT_FORMAT
                        The format in which the output should be written, one of {'loom', 'h5ad', 'zarr', 'csvs'}.